Career Employer

FREE IBEW Aptitude Test Study Guide 2026: Algebra & Reading, All 7 Modules

This interactive guide covers everything on the IBEW aptitude test with step by step algebra and functions without a calculator, a reading method for passage questions, and built in quizzes and flashcards.

Don't know where to start?

To find us again, just search “Career Employer IBEW Aptitude Test”

By

This free study guide covers the IBEW aptitude test, the (formerly NJATC) test battery that local JATCs use to screen inside-wireman apprentice applicants. It has 7 modules: 5 for Algebra and Functions and 2 for Reading Comprehension.

Reading gets about half the guide because it is 36 of the 69 items, and each topic matches an item type shown on the official sample page or a skill the algebra prerequisite covers.[1][2]

Every module ends with a checkpoint quiz, and dotted terms open definitions while tables quiz you back as you review the material.

When a topic needs more reps, you can send it to our free practice test and flashcards.

Algebra and Functions has 33 items in 46 minutes. Reading Comprehension has 36 items in 51 minutes.

  • multiple choice, 4 options
  • no calculator
  • no penalty for guessing

You learn only whether you got a qualifying score. Exact scores are not given, and each local sets its own qualifying score. Some locals now use a different test (GAN), so confirm with your JATC.[1]

IBEW Aptitude Test Snapshot

The IBEW / NJATC aptitude test at a glance
DetailIBEW aptitude test
Given byYour local JATC; test from the Electrical Training Alliance (formerly NJATC)
Algebra and Functions33 items, 46 minutes
Reading Comprehension36 items, 51 minutes
Item formatMultiple choice, 4 options; no penalty for guessing
CalculatorNot allowed
Scores1–9 scale; qualifying score set by each local (often 4)
RetestWait a full 3 months (90 days); some locals longer
Algebra prerequisiteOne full year of high school algebra (or one post-secondary algebra course)
Electrical knowledgeNot required

Official Sample Item Types and Where This Guide Teaches Them

Item types on the Electrical Training Alliance sample page
Sample item typeModule
Evaluate a formula such as A = B + 3(4 − C)3.1 Evaluating formulas
Pick the polynomial equivalent to 3(x + 5)(x − 2)3.2 Multiplying and equivalent forms
Find the next number in a series2 Number series
When is a formula's result positive or negative4.2 Inequalities and the sign of a formula
Match one relationship as a table, equation, rule in words and graph5.2 One rule, four forms
Passage questions: stated detail, applying the passage, which statement is true6 Reading comprehension

Module 1 · Number Operations Without a Calculator

The algebra test allows no calculator, so you must do your arithmetic quickly and exactly. This module covers order of operations, signed numbers, fractions, decimals, percents, exponents and roots. In practice items, the wrong answer choices are often the result that one slip in these steps produces.

1.1 Order of Operations & Signed Numbers

Order of operations tells you which math to do first. On the test you get no calculator, so working in the right order keeps signed numbers and powers straight.

  • grouping symbols first: parentheses, brackets, fraction bars, bars
  • exponents second
  • multiplication and division from left to right
  • addition and subtraction from left to right

Multiplication does not always come before division. Whichever comes first reading goes first. The same is true for addition and subtraction.

A fraction bar groups the whole top and the whole bottom. Work out each side fully before you divide.

Signed numbers follow a few fixed patterns. Adding a negative is subtracting. Subtracting a negative is adding.

The product or quotient of two numbers with the same sign is positive. With different signs it is negative. For a longer product, count the negative factors. An even count of negative factors gives a positive product, and an odd count gives a negative product.

An exponent applies only to what it touches. A negative sign in front of a power is not squared unless it is inside the parentheses.

Absolute value is the distance from zero, so it is never negative. Do what is inside the bars first, then take the distance.[3]

1.2 Fractions, Decimals & Percents

When you need to add or subtract fractions, first rewrite them over a . That common denominator is the least common multiple of the denominators. Then you add or you subtract the numerators over that shared denominator.

To multiply fractions, you multiply straight across the tops and the bottoms. You cancel any common factors first to keep the numbers small through the rest of the work.

To divide by a fraction, you multiply by its instead of dividing. That reciprocal means you flip the second fraction over. If mixed numbers appear in the problem, first change them to improper fractions before multiplying or dividing.

You compare two fractions by cross-multiplying across the diagonals. Percent means per hundred. To find a percent of a number, you change the percent to a decimal and then you multiply by that decimal.

Percent change is the change divided by the ORIGINAL amount, times 100. When two percent changes happen in a row, the effects multiply together. They do not add, so an increase and then an equal percent decrease leaves you below where you started.

To undo a percent increase, you divide by the growth factor from that increase. You do not subtract the percent back off.[4]

Fraction, decimal and percent equivalents to know
FractionDecimalPercent
1/80.12512.5%
1/50.220%
1/40.2525%
1/30.333…33 1/3%
3/80.37537.5%
1/20.550%
2/30.666…66 2/3%
3/40.7575%

1.3 Exponents, Roots & Scientific Notation

Exponent rules

  • Product rule: multiplying powers with the same base, add the exponents
  • Quotient rule: dividing powers with the same base, subtract the exponents
  • Power rule: a power raised to a power, multiply the exponents
  • Power of a product: raise every factor, including the number in front
  • Zero power: any nonzero number to the zero power equals 1
  • Negative exponent: means the reciprocal, and it does not make the number negative
  • Fractional exponent: is a root, with the bottom of the fraction as the root and the top as the power

These rules only work in the cases stated. The product rule and the quotient rule need the same base. The power of a product rule applies to every factor inside.

Roots and scientific notation

Simplify a square root by pulling out the largest factor. Only like radicals can be added, meaning the same number under the root.

The square root of a sum is not the sum of the square roots. That mistake is common on a no calculator test, so keep the sum together under the root.

Scientific notation writes a number as a value from 1 up to but not including 10, times a power of 10. To multiply in , multiply the front numbers and add the exponents, then adjust.[5]

Exponent rules
RulePattern
Productaᵐ · aⁿ = aᵐ⁺ⁿ
Quotientaᵐ ÷ aⁿ = aᵐ⁻ⁿ
Power of a power(aᵐ)ⁿ = aᵐⁿ
Power of a product(ab)ⁿ = aⁿbⁿ
Zero exponenta⁰ = 1 (a ≠ 0)
Negative exponenta⁻ⁿ = 1/aⁿ
Fractional exponenta^(m/n) = (ⁿ√a)ᵐ

Checkpoint · Number Operations

Question 1 of 10

The numbers 58\tfrac{5}{8}, 0.60.6, 0.4\sqrt{0.4} and 23\tfrac{2}{3} are placed in order. Which one is the second greatest?

Module 2 · Number Series & Patterns

The official sample page includes a number-series item, and your job there is to find the next number in a pattern. For series items like that, a fixed checking routine helps you more than waiting for inspiration. This module gives you that routine and shows the pattern types the routine finds.

2.1 Arithmetic & Geometric Series

Start with one habit on any series question. Write the difference between each pair of neighbors.

  • Same difference each time means arithmetic series
  • Quickly growing differences mean test for a common ratio
  • Constant ratio means geometric series

If the difference is the same every time, it is an arithmetic series. The next term adds that .

The common difference can be negative or a fraction. Do not assume it has to be a whole positive number.

If the differences grow quickly, divide each term by the one before it. A constant result is a , so the series is geometric.

A ratio between 0 and 1 makes the terms shrink. A negative ratio flips the sign every step.

Use the rule for the nth term of an arithmetic series: first term plus (n minus 1) times the difference. Use the rule for the nth term of a geometric series: first term times the ratio to the power (n minus 1).

Check your rule against every given term, not only the last two. You catch a wrong rule before you use it on the test question.[6][7]

Series formulas
Series typenth term
Arithmetic (add d)aₙ = a₁ + (n − 1)d
Geometric (multiply by r)aₙ = a₁ · rⁿ⁻¹
Sum of an arithmetic seriesSₙ = n(a₁ + aₙ)/2

2.2 Alternating, Interleaved & Growing-Difference Series

Use this routine on each series:

  • differences first
  • ratios next
  • every other term after that
  • squares, cubes and primes last

Two-step and woven series

The official sample series alternates 2 steps: add 2, then subtract 5, again and again. You stay with that order through the series.

Some series repeat a cycle of operations, such as multiply by 2 then subtract 1. You apply the cycle in the same order without change.

An interleaved series is 2 series woven together. You read every other term as its own series. You track each woven line apart from the other line.

Growing gaps and special numbers

When the differences follow their own pattern (such as rising by 1 or by 2 each step), take the differences of the differences. You compare those results across the series. A constant means a squared-number rule.

Some build from squares, cubes or primes, sometimes shifted up or down. You compare the terms against those forms and allow for the shift.

A Fibonacci-type series adds the 2 previous terms. You add the pair right before to get the term that follows. You keep moving that pair forward through the series.[2]

Checkpoint · Number Series

Question 1 of 10

What number comes next in the series 2, 5, 10, 17, 28, 41, ...?

Module 3 · Expressions & Polynomials

The official sample page asks you to evaluate a formula and to pick an equivalent form of a polynomial. This module covers the tools for that work, which are substitution for a value, combining of like terms, multiplying of expressions, factoring back apart and simplifying of rational expressions, one at a time. It ends with turning word phrases into algebra.

3.1 Evaluating Formulas & Combining Like Terms

To evaluate a formula, you replace each letter with its value in parentheses. Then you follow the order of operations.

Parentheses keep the sign of a negative value when it is squared or multiplied. That sign stays with the number inside the parentheses through the next step.

Like terms have the same variables with the same exponents. Only their coefficients combine, and other terms stay separate.

The multiplies the number outside the parentheses by every term inside. You apply it to each term, not just the first one.

A minus sign in front of parentheses changes the sign of every term inside. Each plus becomes a minus, and each minus becomes a plus when the parentheses come off.

The official sample formula has the form A = B + 3(4 − C). It puts the order of operations and the sign rules together. You handle the parentheses first, then multiply by 3, then add B.[2][8]

3.2 Multiplying Polynomials & Equivalent Forms

To multiply two binomials, you multiply each term of the first by each term of the second. You keep the order straight as First, Outer, Inner, Last (), then you combine like terms:

  • First terms from the two binomials
  • Outer terms from the two binomials
  • Inner terms from the two binomials
  • Last terms from the two binomials

A square of a sum is not the sum of the squares. The middle term, which is twice the product, is the part people drop when they rush.

The product of a sum and a difference of the same two terms is the difference of their squares.

Equivalent forms are the same polynomial written differently. A common pair is a factored form and its multiplied-out form.

To test if two forms are , multiply out the factored one. Another check is to plug the same small number into both forms and compare the results.

The official sample asks which expression equals 3(x + 5)(x − 2). That is an equivalent-forms question, so you answer it with one of those two checks. Both checks use the same idea of equivalent forms.[9][2]

Special products
ProductResult
(a + b)²a² + 2ab + b²
(a − b)²a² − 2ab + b²
(a + b)(a − b)a² − b²

3.3 Factoring

Greatest Common Factor and Simple Trinomials

Factoring is multiplying in reverse. You write the polynomial as a product.

Always take out the first. For a trinomial with leading coefficient 1, find two numbers that multiply to the last term and add to the middle coefficient.

When the last term is negative, the two numbers have opposite signs. Check every factorization by multiplying it back out.

Harder Trinomials and Special Forms

When the leading coefficient is not 1, use the :

  • Multiply the first and last coefficients
  • Find two numbers with that product that add to the middle coefficient
  • Split the middle term and factor by grouping

A factors into a sum times a difference. A sum of two squares does not factor over the real numbers.

Check every factorization by multiplying it back out.[10][11]

3.4 Rational Expressions & Translating Words

A is a fraction with a polynomial on top or bottom.

To simplify, factor the top and the bottom, then cancel factors that are the same. You may cancel only factors (things multiplied), never terms that are added or subtracted.

A value that makes the bottom zero is not allowed. That value cannot be used in the expression.

To add or subtract, use a common denominator just like number fractions. Find the shared bottom first, then combine the tops.

Word phrases on the test follow fixed patterns.

  • ’less than’ reverses the order
  • ’of’ usually means multiply
  • ’per’ means divide
  • ’the quotient of a and b’ is a divided by b
  • ’twice the sum of’ puts the sum in parentheses

Consecutive integers are counted by 1s.

  • n, n + 1, n + 2
  • consecutive even or odd integers are n, n + 2, n + 4

Use n for the first number, then add the pattern. The same letter keeps the numbers linked in one equation.[8]

Checkpoint · Expressions & Polynomials

Question 1 of 10

Simplify x−1+y−1(xy)−1\frac{x^{-1}+y^{-1}}{(xy)^{-1}}.

Module 4 · Equations, Inequalities & Formulas

This module covers solving for an unknown across several common algebra forms. You will work with linear equations, formulas, inequalities, absolute value, systems and quadratics. The official sample page also asks when a formula’s result is positive or negative, which is an inequality in disguise, and it ends with setting up word problems.

4.1 Linear Equations & Solving Formulas

You solve an equation by doing the same thing to both sides. The goal is to get the variable alone.

Clear fractions first by multiplying every term by the least common denominator. That step often makes the rest much easier.

After that, work in this order:

  • Simplify each side
  • Move the variable to one side
  • Undo addition or subtraction first, then multiplication or division

Treat a the same way when you solve a formula for one letter. Treat every other letter as a number and isolate the one you want.

If the wanted letter appears in two terms, gather those terms together. Then factor the letter out so you can isolate it.

Watch what happens if the variable cancels out. A false statement left behind means there is no solution. A true statement left behind means every number is a solution.

Always check by substituting your answer into the original equation. Put the value in place of the variable and simplify both sides. If both sides match, your answer is correct.[12][13]

4.2 Inequalities, Absolute Value & the Sign of a Formula

Inequalities and absolute value

Solve an inequality like an equation, with one extra rule. When you multiply or divide both sides by a negative number, reverse the inequality sign.

A has three parts. Do the same step to all three.

Absolute value rules work by sign and distance:

  • Equal to a positive number gives two answers, one for each sign
  • Less than a number gives one interval between two values (an ’and’ statement)
  • Greater than a number gives two separate rays (an ’or’ statement)
  • Can never equal a negative number

That last rule saves time. If you see an absolute value set equal to a negative number, there is no solution.

Watch the wording in absolute value questions. Less than means the answers stay together between two values. Greater than means the answers split apart into two separate rays.

When a formula stays positive

The official sample asks when the result of a formula such as a = one half of b minus 4 is positive. Set the formula greater than zero and solve for the letter.

That method works for other formulas too. Write the formula, use greater than zero, then solve.

In a linear formula, the sign of the coefficient tells direction. The coefficient’s sign tells you whether the result rises or falls as the letter grows.

A positive coefficient means larger letters give larger results. A negative coefficient means larger letters give smaller results.[14][15][2]

4.3 Systems of Two Equations

A system is two equations that share the same two unknowns. The solution is the pair that makes both true.

Many word problems with two unknowns are systems. You set up two equations, then solve for the pair that fits both.

Two common methods work on the test, with no calculator.

  • Solve one equation for a variable, then put that expression into the other equation
  • Add or subtract the equations, multiplying one or both first if needed, so one variable cancels

The first method is called . The second method is called .

Watch for special cases from the graphs. Parallel lines have the same slope and different intercepts, so they give no solution. The same line gives infinitely many solutions.

To check whether an ordered pair is a solution, substitute it into both equations. It must satisfy both to count.

If it fails either equation, it is not the solution to the system.[16]

4.4 Quadratic, Radical & Rational Equations

Solving quadratics

A quadratic equation has a squared term. First move everything to one side so it equals zero.

Then factor, then set each factor equal to zero. This is the .

  • x squared equals a positive number has two answers, positive and negative
  • never divide both sides by the variable; you lose the solution zero

The works on every quadratic. That formula is x equals negative b plus or minus the square root of (b squared minus 4ac), all over 2a.

The tells how many real solutions. The discriminant is (b squared minus 4ac).

  • positive gives two
  • zero gives one
  • negative gives none

Radical and rational equations

For a radical equation, isolate the root, square both sides, solve, and check every answer in the original. Squaring can create extraneous solutions.

That check is part of the steps. Do not skip it.

For a rational equation, multiply by the common denominator and reject any answer that makes a denominator zero.[17]

Quadratic tools
ToolWhat it gives
Zero-product propertyIf ab = 0, then a = 0 or b = 0
Quadratic formulax = (−b ± √(b² − 4ac)) / 2a
Discriminant b² − 4ac> 0: two real roots; = 0: one; < 0: none
Sum of roots−b/a
Product of rootsc/a

4.5 Word Problems

How to set up a word problem

Word problems test reading as much as math. Read to the end first so you know what the question asks for.

Then give the steps a clear order:

  • Read the full question before writing anything
  • Name the unknown with a letter and write every other quantity in terms of it
  • Translate the sentence that states a relationship into an equation, then solve

Finish by looking back at the wording. Check that the answer is reasonable and answers the question asked (for example the larger number, or the time, not the rate).

Problem types you will see

Learn the setup for each common type. That makes the equation faster to write.

Distance problems use one rule:

  • distance equals rate times time; two movers heading toward each other close the gap at the sum of their speeds

Work, mixture, and proportion problems each have a fixed pattern:

  • Work problems add rates: a job done in a hours is 1/a of the job per hour
  • Mixture problems: the amount of pure ingredient before mixing equals the amount after
  • Proportion problems: set two equal ratios and cross-multiply

Variation problems use k for the constant:

  • in , y equals k times x; in , y equals k divided by x[18]

Checkpoint · Equations & Inequalities

Question 1 of 10

What is the solution set of ∣x−4∣=2x+1|x - 4| = 2x + 1?

Module 5 · Functions, Tables & Graphs

The official sample page shows one relationship written as a table, an equation, a rule in words and a graph, and asks you to match them.

You will move between those forms when you work with function notation and when you find a rule from a table. You will also work with slope and lines and with features of quadratic and exponential functions.

5.1 Function Notation & Composition

A gives exactly one output for each input. Two inputs may share an output.

That still counts as a function because the rule is about one output from each input. It is not about one input for each output.

f(x) is read ’f of x’. It names the output when the input is x, and it is not multiplication.

You evaluate by using the rule with your input in place of x. The way you write the replacement depends on the input:

  • Replace every x with that value in parentheses to evaluate f at a value
  • Place the whole expression such as a + 1 in place of x to evaluate f at an expression
  • Work inside out for f(g(x)): find g first, then use that result as the input to f
  • Set the rule equal to that number and solve for x to solve f(x) equals a number
  • Swap x and y, then solve for y to get the that undoes the function

Composition order matters on a test. f(g(x)) and g(f(x)) are usually different.[19]

5.2 One Rule, Four Forms: Tables, Equations, Words & Graphs

The same relationship can appear as a table, an equation, a rule in words, or a graph. Your job is to spot which forms describe the same pairing of and .

From a table, look at how the output changes when the input goes up by 1. A constant change means a linear rule, and that change is the slope.

The output when the input is 0 is the . That pair gives the starting value for the linear rule.

Other patterns point to other types:

  • Multiplying by the same number each step signals an exponential rule
  • Constant second differences signal a quadratic rule
  • Crossing of the vertical axis on a graph shows the y-intercept

On a graph, the slope is rise over run. Count how far the line goes up or down divided by how far it goes across.

To match a rule in words such as ’half the number, minus 5’, write it as an equation and test two rows of the table. Both rows have to fit if the match is correct.

To check a match fast, plug two input values into each choice and keep the one that gives both table outputs. Throw out any choice that misses even one of the two outputs.[2][20]

5.3 Slope & Equations of Lines

Slope is rise over run. It is the change in y divided by the change in x between two points.

You subtract the coordinates in the same order on the top and the bottom.

  • positive rises from left to right
  • negative slope falls
  • zero slope is a horizontal line
  • vertical line has undefined slope

The y = mx + b shows the slope m and the y-intercept b. Point-slope form uses one point and the slope. Standard form Ax + By = C can be solved for y to read the slope.

  • parallel lines have equal slopes
  • perpendicular slopes are negative reciprocals
  • find the x-intercept by setting y to zero
  • find the y-intercept by setting x to zero

In a word problem, slope is the rate of change, such as dollars per hour. The intercept is the starting amount.[21][22]

Forms of a line
FormEquation
Slope-intercepty = mx + b
Point-slopey − y₁ = m(x − x₁)
StandardAx + By = C (slope = −A/B)
Horizontal liney = c (slope 0)
Vertical linex = c (slope undefined)

5.4 Domain, Range, Quadratic & Exponential Functions

Domain and range

The is every allowed input. Leave out inputs that make a denominator zero or put a negative number under a square root.

The is every possible output. A graph is a function if no vertical line crosses it more than once.

Quadratic and exponential functions

A quadratic function graphs as a parabola. It opens up when the squared term’s coefficient is positive and down when it is negative.

The has x-coordinate equal to negative b over 2a. The axis of symmetry is the vertical line through it.

The of a function are the inputs that give an output of zero, where the graph crosses the x-axis. Linear growth adds the same amount each step.

Exponential growth multiplies by the same factor each step. Adding a number to the whole function shifts the graph up.

Adding a number to x inside shifts it left.[20][19]

Checkpoint · Functions & Graphs

Question 1 of 10

The graph of a linear function f passes through (2, 7)(2,\,7) and (6, 15)(6,\,15). Which describes the graph of f−1f^{-1}?

Module 6 · Reading Comprehension: Method & Literal Questions

Reading Comprehension is 36 of the 69 items, so it is about half of this guide, and 36 items in 51 minutes is about 85 seconds per item.

Passages are expository texts followed by several questions, and the official sample passage is about history and astronomy, not electrical work. The official page says the sample passage is shorter than the passages on the real test, and this module covers a reading method and the questions whose answers are written in the passage.

6.1 How the Reading Test Works & a Reading Method

What the questions look like

The official sample has 3 question types. One asks for a stated detail, one asks for applying the passage to a new case, and one asks which statement is true.

How to read for answers

Read the first question stem before the passage so you know what to look for. You keep that need in mind while you read the lines once at a steady pace.

As you read, note the main point of each paragraph in a few words. Those short notes help you find where to return later.

For each question, go back to the lines that answer it. Do not answer from memory of the passage.

Cross out choices that are off topic, contradicted by the passage, or too extreme. A such as always, never, all or only often makes a choice too extreme, and then you compare the last two against the text.

Your own background knowledge is a trap on this test. A choice can be true in real life and still be wrong if the passage does not support it.

With no penalty for guessing, answer every item even when time is short.[2][1]

6.2 Main Idea, Best Title & Summary

The is the one point the whole passage supports. Each paragraph connects to it, so you can check a choice by asking if every paragraph fits.

A wrong main idea choice is often too narrow. It picks one detail from one paragraph and misses the rest. The opposite fault is also common. A choice can be too broad and name a whole subject the passage never covers.

When a passage compares two things, the main idea usually covers both. Look for an answer that holds the two sides together instead of naming only one.

The best title names the passage’s specific topic and point. It does not drift into general background. It stays close to what the passage actually proves or explains.

A summary keeps the main point and key support. It leaves out minor details and adds nothing new. If an option brings in outside facts, it is not a good summary.

First and last sentences often state the main idea. That pattern gives you a fast place to check. But a turn word such as however in the middle can change the point, so you still need to read the full thought before you decide.[2]

6.3 Stated Details & Paraphrase

A stated detail question has its answer in the text. The answer is usually reworded, so you look for the same meaning expressed in new language. Find that sentence in the passage before you choose.

The right choice is often a . It keeps the idea from the passage while it changes the words. You recognize it by meaning, even though the phrasing looks different on the page.

A choice that copies exact words from the wrong part of the passage is a common trap. Familiar wording can look safe because it came from the passage. It is still wrong when those words belong to a different sentence with a different point.

Watch numbers and comparisons exactly. The test changes meaning through small wording differences. Treat more than as different from at least, treat most as different from all, and treat percent as different from number.

A question that asks which is NOT stated needs every choice checked against the passage. One choice that matches the passage does not finish the work. You keep checking each remaining choice until you find the one without support in the text, and you confirm the others are stated.[2]

6.4 Procedures, Sequence & Conditions

Procedure passages describe steps. Questions ask what comes first, what is required before a step, or what happens when a condition is not met.

You should track order words as you read. The order words are first, next, before, after, once, until, and by the time.

You should also track condition words. The condition words are only if, unless, except when, as long as, and provided that.

Number the steps in your head or on scratch paper as you read. This keeps the clear even when the wording is dense.

A step that happens once something is true cannot start before it. Wait for that trigger in the passage before you place the step.

Only if sets a requirement. Meeting it alone does not make the step happen.

On test day, use those markers to sort the actions. Many wrong answers flip before and after or ignore unless and provided that. Match your numbered order to the question and pick the step or outcome the passage actually ties to that point.[2]

6.5 Pacing Long Passages

The real reading passages are longer than the official sample, so pacing matters. Plan your time before you start each passage.

At about 85 seconds per item, a passage with 4 questions earns roughly 5 to 6 minutes including the reading. That time has to cover both the first read and the questions.

Read once at a steady pace, then return only to the lines each question needs. Do not reread the whole passage for every question.

Work the questions in this order:

  • mark your best guess and move on if a question stalls you
  • come back if time remains
  • leave no blanks because there is no penalty for guessing

Practice with timed, multi-paragraph passages, not only short samples. Short samples will not train your pacing for the longer passages you will face.[2][1]

Checkpoint · Reading: Method & Details

Question 1 of 10

Read the passage, then answer the question. Related classroom instruction is a required part of the apprenticeship, and attendance is taken at every session. An apprentice who arrives more than fifteen minutes after the start of class, or leaves more than fifteen minutes early, is recorded as absent for half of that session. Instructors record attendance on a sign-in sheet that each apprentice must initial, and an apprentice who forgets to initial it is treated as absent unless the instructor corrects the sheet that night. Each apprentice may miss up to three sessions in a school year without penalty. Two half absences count as one full absence toward that limit. The committee does not distinguish between excused and unexcused absences; a session missed because of illness counts toward the three in the same way as one missed because of an overslept alarm. Apprentices are therefore encouraged to save their allowed absences for real emergencies rather than spend them early in the year. Every absence beyond the third must be made up within two weeks, either by attending the matching session with another class section or by completing an instructor-approved makeup assignment. Makeup sessions are offered only on weeknights, so apprentices working out of town should arrange an assignment instead. An assignment must be turned in to the instructor who taught the missed session. Absences that are not made up within two weeks are reported to the apprenticeship committee. An apprentice with more than two unresolved absences in one year will not advance to the next year of classes until they are cleared, which also delays the wage increase tied to advancement. Apprentices who believe an absence was recorded in error may ask the instructor to review the sign-in sheet. Which statement must be true according to this section of the handbook?

Module 7 · Reading Comprehension: Inference, Words & Arguments

This module covers the reading questions whose answers are not written word for word. You will work with inference, applying the passage, words in context, logic words, and the author’s purpose and argument.

Every answer still has to be provable from the passage, and extreme or outside-knowledge choices are the most common traps.

7.1 Inference & Conclusions

An is a conclusion the passage strongly supports without saying it outright. It stays close to the stated facts and does not bring in outside information.

On test day, check a choice by asking a plain question. You ask, must this be true if the passage is true. If it only could be true, it is not the inference.

That test keeps you from picking answers that sound reasonable but go past the text. A statement can feel likely and still fail, because likely is not the same as required by the passage.

The right inference is usually modest. It claims a little, and that little follows cleanly from what you read.

Watch choices with always, never, all or only. Those words often go further than the text and make a broad rule from narrow support. When you see them, compare each word to the passage and reject the choice if the passage does not fully back it.

Some questions ask which statement is true. For those, you need each choice tested against the passage until one is fully supported. Work through the options one by one and keep the one that matches without adding detail.

Do not stop at the first choice that looks partly right. A half-right choice matches the passage in its first half and adds or reverses a detail in the second. The added or reversed part makes the whole choice wrong, even when the opening words look exact.[2]

7.2 Applying the Passage to a New Case

One official sample question type asks you to apply what the passage says to a new situation. The passage gives the rule. The new case tests if you follow it.

Start by finding the rule in the passage. Read slowly and list every condition the passage sets, then check the new case against each one.

Use a pencil or your finger to track the conditions on a phone screen.

  • every condition stated in the passage
  • the facts of the new case
  • a check of the new case against each condition

Match conditions, not just the topic. A case on the same subject can still fail one condition. If one condition is missing or changed, the rule does not apply.

Take each condition in order. Mark it as met or not met before you pick an answer. Do not skip a condition because the topic looks familiar.

Cause and effect questions depend on signal words such as:

  • because
  • as a result
  • therefore
  • due to

These words tell you which part causes the other part. The cause comes with the signal word or right next to it in many passages, so read the full sentence.

Do not reverse . An answer that flips them is wrong even if it uses words from the passage. Keep the direction the passage gives.[2]

7.3 Words in Context

A words in context question asks what a word means in this sentence. It does not ask what the word means in general.

You have to match the use in front of you on the test. The most common meaning of the word is often the trap answer.

Work by substitution. Put each choice into the sentence in place of the word. Keep the one that preserves the meaning and drop the ones that change it.

Nearby context clues tell you which choice fits. A definition set off by commas or a dash gives the intended meaning right in the sentence.

An example that follows also points to the meaning. A restatement nearby says the same idea in other words and confirms it.

A contrast word points the other way. Words such as unlike or although signal the opposite, so the answer must flip from the other part of the sentence.

Some questions ask about a pronoun or a short phrase instead of a hard word. For those, find the noun it replaces in the nearby text.

That noun is usually the nearest matching noun before it. Match it in number and sense, then read the sentence with that noun in place.

Technical terms in a passage work the same way. Those terms are usually defined by the passage itself, so trust the passage definition when you choose.[2]

Multiple-meaning words: the common meaning vs a context meaning
WordContext meaning
Conduct (an investigation)Carry out
Sound (a sound plan)Reliable, well reasoned
Yield (yields results)Produce
Charge (in charge)Responsibility
Grounded (a grounded claim)Based on evidence
Novel (a novel method)New
Address (address a problem)Deal with
Fair (a fair amount)Moderately large
Table (table a proposal)Postpone
Sustain (sustain damage)Suffer

7.4 Signal Words & If-Then Logic

Conditions

’If A, then B’ gives one direction from A to B. It does not also mean ’if B, then A’. A choice that reverses the condition is a classic wrong answer.

’A only if B’ sets B as required for A. Without B, A cannot hold under that statement. Still, B alone does not make A happen.

’A unless B’ has a fixed meaning. It means if not B, then A. You keep the not with B when you restate it.

’Some’ means at least one, not most. ’Most’ means more than half, not all. You hold each word to that exact strength and no stronger.

’Not all’ means at least one is not. It leaves open how many are not, and it does not mean none.

Contrast, conclusion and hedge signal words

Contrast signal words often introduce the author’s real point. They signal a turn from what came before to what the author wants you to take away. These signal words include however, although, and yet.

Conclusion signal words mark what the author concludes from the evidence. They show the result the author draws after giving reasons or facts. These signal words include therefore, thus, and as a result.

Hedge signal words mean the author is not claiming certainty. They soften a claim to possibility or likelihood rather than fact. These signal words include may, suggests, and likely.[2]

7.5 Author's Purpose, Tone & Structure

On the test, author’s purpose means why the passage or a detail is there. It names what the writer is doing in that passage or in that sentence.

That purpose is often one of these actions:

  • Informing the reader
  • Explaining an idea
  • Persuading the reader
  • Instructing the reader
  • Describing something
  • Comparing things

To inform and to explain both give information. To persuade tries to change thinking. To instruct gives direction.

To describe paints a picture in words. To compare sets things beside each other.

An example stays tied to the point it supports. Name its job in simple terms, such as to illustrate a point or to contrast two things.

tone means the author’s attitude. It shows in word choice.

  • Neutral wording
  • Cautious wording
  • Critical wording
  • Enthusiastic wording
  • Skeptical wording

Neutral wording holds back judgment. Cautious wording hedges and qualifies. Critical wording finds fault.

Enthusiastic wording shows strong approval. Skeptical wording shows doubt.

structure means how the passage is put together. Common patterns on the test are these:

  • Time order
  • Problem and solution
  • Compare and contrast
  • Cause and effect
  • Claim and evidence

Time order follows steps in sequence. Problem and solution states trouble and then gives a fix. Compare and contrast sets things side by side.

Cause and effect links reasons and results. Claim and evidence states a point and then backs it.

Answer choices use verbs that claim an action. Match the verb to what the passage actually does.

  • Describe for writing that tells about something
  • Argue for writing that takes a position
  • Warn for writing that gives caution
  • Compare for writing that sets things side by side[2]

7.6 Facts, Opinions & Arguments

Facts and Opinions

A fact can be checked. An opinion is a judgment.

Opinions are often marked by words such as:

  • best
  • should
  • unfortunately

Claims, Evidence and Assumptions

A claim is the point an author wants you to accept. Evidence is the facts, data or examples that support it.

A choice strengthens a claim if it makes the conclusion more likely. It weakens the claim if it breaks the link between evidence and conclusion.

An is an unstated idea the argument needs. If it were false, the argument would fall apart.

When a passage gives two viewpoints, keep track of who says what. A choice may present one side’s view as the author’s.[2]

Checkpoint · Reading: Inference & Arguments

Question 1 of 10

Read the passage, then answer the question. When Marco Ellis started his house painting company, he won about four of every five jobs he bid on. He figured each price by adding up paint, supplies, and his crew's wages, then adding 10 percent on top. Customers liked his numbers, and by his first spring his calendar was booked months ahead. Other painters in town grumbled that he was underpricing the market, but Ellis took the steady work as proof that his method was sound. By the end of his second year, though, Ellis had less money in the bank than when he started. His first guess was that his crew was working too slowly, so for a month he timed every job against his estimate. The crew finished on schedule nearly every time, and the timing showed no pattern of waste. It was his bookkeeper who found the gap. Some costs never showed up on any single job: insurance, the van payment, fuel, the unpaid evenings Ellis spent writing estimates, and the days lost to rain. Together they ran close to 2,000 dollars a month, and his 10 percent margin covered less than half of that. Each job looked profitable on paper, but the jobs together did not pay for the business that carried them out. Ellis now divides a year's worth of these costs across the days he expects to work and adds that share to every bid before setting his margin. He wins only about half of his bids, and at first it worried him to watch some regular customers hire cheaper painters. By the end of the following year, however, his bank balance was rising for the first time. Which title best fits the passage?

How to Use This IBEW Aptitude Study Guide

  • Work the 7 modules in order, since the algebra modules build on each other
  • Cover each worked example’s answer and solve it yourself first
  • Take each module’s checkpoint, and checking off sections raises your readiness score
  • Practice without a calculator from day one
  • Drill number series and factoring daily with the flashcards
  • Take full timed practice tests: 46 minutes for algebra and 51 minutes for reading
  • Confirm your local’s test and qualifying score with your JATC

IBEW Aptitude Concept Questions

These are common math and reading questions applicants search while studying, each answered briefly with a source. Test yourself, then drill them as flashcards.

IBEW Aptitude Glossary

Every math and reading term from this guide is here. Hover any dotted term in the guide, or flip the whole deck as a self-grading flashcard set.

Absolute value
Distance of a number from zero; never negative. |−6| = 6.
AC method
Factoring ax² + bx + c by finding two numbers with product a·c and sum b, then grouping.
Assumption
An unstated idea an argument depends on.
Cause and effect
A relationship in which one event leads to another; signaled by because, so, as a result.
Coefficient
The number multiplying a variable; in −7x² it is −7.
Common denominator
A shared bottom number that lets fractions be added or subtracted; the least common multiple of the denominators.
Common difference
The fixed amount added each step in an arithmetic sequence.
Common ratio
The fixed factor multiplied each step in a geometric sequence.
Composition
f(g(x)): apply g first, then f to the result.
Compound inequality
Two inequalities joined by 'and' or 'or', such as −2 < x ≤ 5.
Consecutive integers
Integers in a row: n, n + 1, n + 2.
Context clue
Nearby words that reveal a word's meaning: a definition, example, contrast or restatement.
Difference of squares
a² − b² = (a + b)(a − b).
Direct variation
y = kx; y changes by the same factor as x.
Discriminant
b² − 4ac; positive: 2 real solutions, zero: 1, negative: none.
Distributive property
a(b + c) = ab + ac.
Domain
All allowed inputs of a function.
Electrical Training Alliance
Joint IBEW-NECA training organization (formerly NJATC) that provides the apprenticeship aptitude test battery.
Eligibility list
Ranked list of qualified applicants; a name stays on it for 2 years.
Elimination
Solving a system by adding or subtracting equations so one variable cancels.
Equivalent
Two expressions that give the same value for every allowed value of the variable.
Extraneous solution
A value the algebra produces that fails the original equation; reject it.
FOIL
First, Outer, Inner, Last: the four products when multiplying two binomials.
Function
A rule that gives exactly one output for each input.
Greatest common factor
The largest factor shared by every term; factor it out first.
Inference
A conclusion the passage supports but does not state.
Input
The x-value fed into a function.
Interleaved
Two number series woven together; read every other term.
Inverse function
The function that undoes another; swap x and y and solve for y.
Inverse variation
y = k/x; when x doubles, y halves.
JATC
Joint Apprenticeship and Training Committee: the local IBEW-NECA committee that runs an apprenticeship program and gives the aptitude test.
Left to right
Rule for operations of equal rank: multiply and divide, then add and subtract, in the order they appear.
Like terms
Terms with the same variables raised to the same powers, such as 3x²y and −5x²y.
Literal equation
An equation with several letters, such as a formula, solved for one letter.
Main idea
The one point the whole passage supports.
Negative reciprocal
Flip the fraction and change its sign; slopes of perpendicular lines.
Output
The value a function returns, f(x) or y.
Paraphrase
The same idea restated in different words.
Percent change
(New − old) ÷ old × 100.
Perfect square
A number that is a whole number squared: 1, 4, 9, 16, 25, 36, 49, 64, 81, 100, 121, 144.
Quadratic formula
x = (−b ± √(b² − 4ac)) / 2a for ax² + bx + c = 0.
Qualifier
A word that limits a claim, such as some, often, may or usually.
Qualifying score
The minimum result a local JATC requires before an interview; set locally on a 1 to 9 scale.
Range
All possible outputs of a function.
Rational expression
A fraction whose numerator or denominator is a polynomial.
Reciprocal
1 divided by a number; a number times its reciprocal is 1. The reciprocal of 2/5 is 5/2.
Scientific notation
A number written as a value from 1 up to (not including) 10 times a power of 10, such as 3.2 × 10⁴.
Second difference
The difference between consecutive differences; constant second differences mean a quadratic pattern.
Sequence
The order in which steps or events happen, often marked by words such as first, before, after and once.
Signal word
A word such as however, therefore, unless or only if that shows how ideas relate.
Slope
Rise over run: change in y ÷ change in x.
Slope-intercept form
y = mx + b, with slope m and y-intercept b.
Substitution
Solving a system by putting one equation's expression for a variable into the other equation.
Tone
The author's attitude toward the subject, shown by word choice.
Vertex
The turning point of a parabola, at x = −b/(2a).
Y-intercept
Where a graph crosses the y-axis; the output when x = 0.
Zero-product property
If a product equals 0, at least one factor equals 0.
Zeros
Inputs that make a function equal 0; the graph's x-intercepts.

IBEW Aptitude Study Guide FAQ

The IBEW aptitude test has 2 tests: Algebra and Functions (33 items, 46 minutes) and Reading Comprehension (36 items, 51 minutes). Both are multiple choice with 4 options, and you take them with no calculator. The algebra covers formulas, polynomials, number series, inequalities and functions in tables, equations, words and graphs. Reading uses passages followed by several questions.

References

  1. 1.Electrical Training Alliance. “Applying for Apprenticeship (aptitude test battery).” electricaltrainingalliance.org, accessed Nov 15, 2026. ↑
  2. 2.Electrical Training Alliance. “Preparing for the Test (sample algebra and reading items).” electricaltrainingalliance.org, accessed Nov 15, 2026. ↑
  3. 3.OpenStax (Rice University). “Intermediate Algebra 2e, 1.2 Integers.” openstax.org, accessed Nov 15, 2026. ↑
  4. 4.OpenStax (Rice University). “Intermediate Algebra 2e, 1.3 Fractions.” openstax.org, accessed Nov 15, 2026. ↑
  5. 5.OpenStax (Rice University). “Intermediate Algebra 2e, 5.2 Properties of Exponents and Scientific Notation.” openstax.org, accessed Nov 15, 2026. ↑
  6. 6.OpenStax (Rice University). “Intermediate Algebra 2e, 12.2 Arithmetic Sequences.” openstax.org, accessed Nov 15, 2026. ↑
  7. 7.OpenStax (Rice University). “Intermediate Algebra 2e, 12.3 Geometric Sequences and Series.” openstax.org, accessed Nov 15, 2026. ↑
  8. 8.OpenStax (Rice University). “Intermediate Algebra 2e, 5.1 Add and Subtract Polynomials.” openstax.org, accessed Nov 15, 2026. ↑
  9. 9.OpenStax (Rice University). “Intermediate Algebra 2e, 5.3 Multiply Polynomials.” openstax.org, accessed Nov 15, 2026. ↑
  10. 10.OpenStax (Rice University). “Intermediate Algebra 2e, 6.1 Greatest Common Factor and Factor by Grouping.” openstax.org, accessed Nov 15, 2026. ↑
  11. 11.OpenStax (Rice University). “Intermediate Algebra 2e, 6.2 Factor Trinomials.” openstax.org, accessed Nov 15, 2026. ↑
  12. 12.OpenStax (Rice University). “Intermediate Algebra 2e, 2.1 Use a General Strategy to Solve Linear Equations.” openstax.org, accessed Nov 15, 2026. ↑
  13. 13.OpenStax (Rice University). “Intermediate Algebra 2e, 2.3 Solve a Formula for a Specific Variable.” openstax.org, accessed Nov 15, 2026. ↑
  14. 14.OpenStax (Rice University). “Intermediate Algebra 2e, 2.5 Solve Linear Inequalities.” openstax.org, accessed Nov 15, 2026. ↑
  15. 15.OpenStax (Rice University). “Intermediate Algebra 2e, 2.7 Solve Absolute Value Inequalities.” openstax.org, accessed Nov 15, 2026. ↑
  16. 16.OpenStax (Rice University). “Intermediate Algebra 2e, 4.1 Solve Systems of Linear Equations with Two Variables.” openstax.org, accessed Nov 15, 2026. ↑
  17. 17.OpenStax (Rice University). “Intermediate Algebra 2e, 9.3 Solve Quadratic Equations Using the Quadratic Formula.” openstax.org, accessed Nov 15, 2026. ↑
  18. 18.OpenStax (Rice University). “Intermediate Algebra 2e, 2.4 Solve Mixture and Uniform Motion Applications.” openstax.org, accessed Nov 15, 2026. ↑
  19. 19.OpenStax (Rice University). “Intermediate Algebra 2e, 3.5 Relations and Functions.” openstax.org, accessed Nov 15, 2026. ↑
  20. 20.OpenStax (Rice University). “Intermediate Algebra 2e, 3.6 Graphs of Functions.” openstax.org, accessed Nov 15, 2026. ↑
  21. 21.OpenStax (Rice University). “Intermediate Algebra 2e, 3.2 Slope of a Line.” openstax.org, accessed Nov 15, 2026. ↑
  22. 22.OpenStax (Rice University). “Intermediate Algebra 2e, 3.3 Find the Equation of a Line.” openstax.org, accessed Nov 15, 2026. ↑
Career Employer

Career Employer is the ultimate resource to help you get started working the job of your dreams. We cover topics from general career information, career searching, exam preparation with free study materials, career interviewing, and becoming successful in your career of choice.

Follow Us:

All Posts

Career Employer’s Editorial Process

Here at Career Employer, we focus a lot on providing factually accurate information that is always up to date. We strive to provide correct information using strict editorial processes, article editing, and fact-checking for all of the information found on our website. We only utilize trustworthy and relevant resources. To find out more, make sure to read our full editorial process page here.