Where the IBEW Aptitude exam's points come from
Electrical Training Alliance's official outline weights, the exam rules and our 250 free practice questions mapped domain by domain. Use it to plan your study hours.
- Given By:Your local JATC, using the Electrical Training Alliance (formerly NJATC) test battery
- Format:Multiple choice, 4 options per item
- Guessing Penalty:None: score = items answered correctly
- Qualifying Score:Set by each local on a 1 to 9 scale (often 4); exact scores not given
- Next Step:Oral interview with a NECA and IBEW committee, then a ranked list kept 2 years
Where the IBEW Aptitude points are
Electrical Training Alliance's official weight for each of the two domains. Hover or tap a domain to see how many questions that means on your exam.[1]
See these numbers as a table
| Domain | Official weight | Questions on your exam | Our practice questions |
|---|---|---|---|
| Algebra and Functions | 48% | 33 | 120 |
| Reading Comprehension | 52% | 36 | 130 |
What to do: Reading Comprehension is the biggest domain at 52%, which means 36 of your questions. Algebra and Functions is the smallest at 48%.
Split your study time
Your hours, divided by Electrical Training Alliance's domain weights.
Weights and rules from Electrical Training Alliance's published IBEW Aptitude exam outline and certification pages. Practice-question counts from Career Employer's IBEW Aptitude bank. Fees and requirements can change; check Electrical Training Alliance before you register.
The IBEW aptitude test is the aptitude test battery from the Electrical Training Alliance (formerly NJATC). Local JATCs (joint apprenticeship and training committees) of the IBEW and NECA use it to screen inside-wireman apprentice applicants.
It has 2 tests:
- Algebra and Functions
- Reading Comprehension
No previous electrical knowledge is needed for either test. These free practice questions are written to match both tests.[1]
Pair them with our free IBEW aptitude study guide and flashcards.
What Is on the IBEW Aptitude Test?
The aptitude test has timed parts. Algebra and Functions has 33 items in 46 minutes. Reading Comprehension has 36 items in 51 minutes.
Every item is multiple choice with 4 options. No calculator is allowed.
The official sample items show these algebra types:
- evaluating a formula
- equivalent forms of a polynomial
- the next number in a series
- when a formula’s result is positive or negative
- matching one relationship shown as a table, an equation, a rule in words or a graph
For reading, passages are followed by several questions. The official sample passage is shorter than the passages on the real test.[1][2]
| Test | Items | Time | What it covers |
|---|---|---|---|
| Algebra and Functions | 33 | 46 minutes | Formulas, polynomials and equivalent forms, number series, sign of a formula's result, one relationship shown as a table, equation, rule in words or graph |
| Reading Comprehension | 36 | 51 minutes | Passages followed by several questions: stated details, inference, applying the passage to a new case, which statement is true |

Practice Questions by Test
You can take a full mixed Start Test across both tests, or open the hub and drill 1 test at a time.
- Multi-step algebra, worked by hand, with wrong options from common mistakes
- Separate passages about science, history, workplace rules and procedures for reading items
- Explanations showing the work or pointing to the passage words that prove the answer
ETA Battery or GAN Test? Check Your Local
Not every IBEW local still uses this test. Recently, several JATCs switched to the GAN aptitude test plus a Personal Experience Form.
Their own sites give these examples:
- JATC 26 in the Washington DC and Maryland area (2026)
- Boston (Local 103)
- Phoenix
- Columbus (Local 683)
GAN covers these areas:
- reading
- numerical computation
- numerical reasoning
- mechanical reasoning
- paper folding
Some of these programs dropped minimum scores. Some replaced the interview with the Personal Experience Form.
Check with your local JATC which test it gives before you study. This practice test covers the Electrical Training Alliance algebra and reading test.[7][8][9][10]
How Is the IBEW Aptitude Test Scored?
The Electrical Training Alliance does not give exact scores. You are told only whether you got a qualifying score.
Results reach your local JATC about 2 to 4 weeks after the test.
Score scale and local minimums
Locals report results on a 1 to 9 scale. Each local sets its own minimum.
- 4 out of 9 at Local 325 (Binghamton, New York)
- 4 out of 9 at the Portsmouth, Ohio JATC (Local 575)
- 3 out of 9 at the Westchester-Fairfield JATC (Local 3)
- 5 for inside wireman at the Puget Sound JATC (Local 46)
Interview and ranking
A qualifying score earns an oral interview with a committee of NECA and IBEW members. Then comes an overall ranking.
Your name stays on the eligibility list 2 years. How much the test counts in the ranking differs by local.
- Westchester-Fairfield = aptitude test 50%, interview 40%, electrical vocational training up to 10%
- Portsmouth ranks by interview score
So a higher score can still help even above the minimum where the test is part of the ranking.[1][3][4][5][6]
| Local program | Published minimum (1 to 9 scale) | Source |
|---|---|---|
| IBEW Local 325 JATC (Binghamton, NY) | 4 | NY State Department of Labor notice |
| Portsmouth, OH JATC (Local 575) | 4 | Program website |
| Westchester-Fairfield JATC (Local 3) | 3 | 2025-26 recruitment notice |
| Puget Sound JATC (Local 46), inside wireman | 5 | Washington registered standards |
IBEW Aptitude Test Retake Rules
A full 3 months (90 days) must pass before you may retake the test. If you do not finish the test session, you cannot finish it another day, and the 90-day wait applies.
- The official page adds that a six-month rule stays in effect after each later retake
- Puget Sound JATC sets its own wait of 6 months after a score below its minimum
- Retesting early voids the score and starts a new 90-day wait, and willful attempts can mean permanent disqualification[1][5]
What to Expect on Test Day
Bring a photo ID. No ID means no test.
Arrive at least 15 minutes early. Plan about 3 hours at the test site.
The battery takes about two and a half hours with a short break between the two tests. Children are not allowed at the test center.
Pencils and other materials are provided. Leave the calculator at home, and remove a watch with a calculator.
There is no penalty for guessing, so answer every item. Your pace is about 84 seconds per algebra item and about 85 seconds per reading item.
Ask your JATC for testing accommodations before or as soon as you are scheduled.[1]
Who Can Apply
Most locals require you to be 18. The minimum age is set locally.
Typical requirements from the Electrical Training Alliance include:
- one full year of high school algebra with a passing grade (or one post-high-school algebra course)
- a high school diploma or GED (or a 2-year associate degree or higher), with official transcripts
- a drug test, a physical, a background check or a valid driver’s license in some programs
- documented electrical construction work hours that can waive the minimum requirements in some programs[1][3][4]
What IBEW Aptitude Test-Takers Report
What people who recently sat the IBEW Aptitude said about the real exam in public forums, quoted word for word:
Timed test, reading too slow
“I just recently failed the aptitude test, I did not qualify to interview for the apprenticeship. I think the fact it was timed threw me off … I need to be much faster when it comes to the reading portion”
Missed qualifying score after years away
“Unfortunately I did not achieve the 5 score or better. Did not help that I have been out of school for 17 years and have not tested on anything in that same amount of time. I tried to study myself using Khan Academy.”
Failed, went non-union, retrying
“I took the aptitude test and failed, so I went non-union … They’ve also changed the type of test. Now it’s the GAN test, which seems so much easier than the last test.”
Algebra harder than expected, 6/9
“The aptitude was at a higher level of algebra. I was not well prepared for the Math portion... … I must have been saved by the reading comprehension part... … I did pass and will have an oral interview.”
Number series and core algebra
“Just did my aptitude test today and passed. … Number series, standard algebra questions asking you to solve for a letter. Foil method, factoring, pretty much the fundamentals of algebra.”
How to Use This IBEW Aptitude Practice Test
- Take a full timed practice test with no calculator to find your weaker test
- Drill number series until checking differences, ratios and every-other-term patterns is habit
- Practice factoring and expanding until you spot equivalent forms fast
- For reading, find the sentence that proves your answer before you pick it
- Read every explanation, including why the wrong answers are wrong
Conclusion
The IBEW aptitude test rewards algebra done by hand and careful reading under time pressure. You can use this free practice test to find your weak topics.
You can then study them with the study guide and flashcards. Confirm your local’s test, qualifying score and dates with your JATC.
Keep going with the free IBEW aptitude study guide and flashcards.
IBEW Aptitude Practice Test FAQ
The IBEW aptitude test has 2 timed parts from the Electrical Training Alliance. One part is Algebra and Functions with 33 items in 46 minutes, and the other part is Reading Comprehension with 36 items in 51 minutes. All questions are multiple choice with 4 options, and calculators are not allowed. You do not need any electrical knowledge for this test.
There is no single national passing score because each local JATC sets its own minimum. Locals use a 1 to 9 scale, with 4 out of 9 a common minimum (Local 325, Portsmouth Local 575), though some use 3 (Westchester-Fairfield, Local 3) or 5 (Puget Sound, Local 46). Exact scores are not given, and you learn only whether you qualified.
No, you cannot use a calculator on the IBEW aptitude test. Calculators are not allowed, and if you wear a watch with a built-in calculator you must remove it before you start the test and keep it off during the test. The math on the test is designed to be done by hand without a calculator.
You must wait a full 3 months (90 days) before a retake, per the Electrical Training Alliance. The official page says the six-month rule stays in effect after each later retake. Some locals set longer waits, such as 6 months at Puget Sound after a score below the minimum. Testing early voids the score.
Yes, you may find it hard because the math and timing are tough. The algebra goes past arithmetic to polynomials, factoring, functions shown as tables, equations and graphs, and number series, all without a calculator. Time is tight, with 46 minutes for 33 algebra items. Reading passages on the real test are longer than the official sample.
No, not every local uses the same test. Many locals across the country use the Electrical Training Alliance algebra and reading battery for applicants. Several JATCs, including JATC 26, Boston, Phoenix and Columbus, switched to the GAN aptitude test with a Personal Experience Form. To be sure, ask your local JATC directly which test it gives before you start studying.
After you pass the IBEW aptitude test, the next step is that you are scheduled for an oral interview with a committee of NECA and IBEW members. After that interview and a full review of your qualifications, you are given an overall ranking. Your name stays on the eligibility list for 2 years, and openings are filled in ranking order.
What changed on this page
Every real change, with the date.
- Interactive charts added. Built from the official outline and our question bank.
Want the short version before you start the question bank? Our free IBEW Aptitude cheat sheet condenses the highest-yield IBEW Aptitude facts into one quick review for your final week.
IBEW Aptitude question bank
All 250 questions, by domain
A reference copy of every question in this practice test. Each answer stays hidden until you choose to show it. To practice with scoring, timing and your readiness score, use Start Test at the top of the page.
Algebra & Functions (120)
The numbers , , and are placed in order. Which one is the second greatest?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Convert to decimals: , , and because and . The order from greatest is . Taking as 0.2 (the root of 0.04) drops it to last and makes second; guessing it near 0.7 puts it first and makes second.
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The negative exponent flips the fraction: . The cube root of a negative is negative, , so the value is . Dropping that negative gives . Not flipping the fraction gives , and reading the negative exponent as a negative number gives .
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The numerator is , because means and an odd power of stays negative. The denominator is , so the value is . Reading as gives ; treating as gives 1; treating as gives .
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Work from the inside out: , so the bracket is . Then , and . Writing and dropping the double negative gives 16; doing first gives ; taking as gives 12.
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Inside the first bars, , so and the first term is . The product is , and subtracting it gives . Writing without changing subtracting a negative into adding gives ; treating as gives 11, and reading as 11 gives .
A material cost rises 10%, then the new cost rises another 10%, and then that cost falls 20%. What is the net change from the starting cost?
- A.a 4% decrease
- B.a 3.2% decrease
- C.a 1% increase
- D.no net change
Show answerHide answer
Correct answer: a 3.2% decrease
Percent changes multiply: , and , so the cost ends 3.2% lower. Adding the percents () gives no net change. Treating the two 10% rises as one 20% rise gives , a 4% decrease, and subtracting 20 points from the 21% rise gives a 1% increase.
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
, so . Any nonzero number to the zero power is 1, and . The total is . Taking as 0 gives 0 and taking it as 7 gives 7; reading as (dividing by 4 times 2) gives .
Which of these numbers is the greatest?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
. is smaller because . is just above 7 (, so ), about 7.07. Picking assumes a larger denominator means a larger fraction, and picking assumes the root of the largest number shown wins.
If and , what is the value of ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Substitute: , , and , so the expression is . Leaving as gives ; taking as gives ; subtracting before multiplying, , gives 0.
Simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Rationalize: . Then and , so the total is . Multiplying the top by without dividing by 6 gives , and pulling 9 instead of 3 out of gives . Combining as gives , but radicals cannot be subtracted under one root.
At a training center, 60% of the applicants pass the aptitude test. Of the applicants who pass, 35% are not offered an interview. Of the applicants who are interviewed, one-third are not placed on the ranking list. If 78 applicants are placed on the ranking list, how many applicants took the test?
- A.200
- B.468
- C.300
- D.600
Show answerHide answer
Correct answer: 300
Each stage keeps a share of the stage before it: , so and . Using (the share dropped) instead of gives . Subtracting treats the 35% as a share of all applicants and leads to 468, and skipping the last stage gives .
At 1 a.m. the temperature was F. Over the next four hours it changed by , , , and , in that order. What is the difference between the highest and lowest temperatures recorded, counting the 1 a.m. reading?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The readings are . The highest is 5 and the lowest is , so the difference is . Subtracting the sizes, , gives 6; measuring from the 1 a.m. reading to the low gives 7; and the net change from start to finish is only 4.
On a number line, point P is at and point Q is at . Point M is the midpoint of segment PQ. How far is M from 0?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The midpoint is the average: , so M is unit from 0. Forgetting to divide by 2 gives . Ignoring the negative sign and averaging and gives , which is half the length of PQ, and is the full length of PQ.
An electrician used of a spool of wire on one job, then used of the wire that was left on a second job. If 16 feet remain on the spool, how many feet were on the spool at the start?
- A.24 feet
- B.60 feet
- C.240 feet
- D.40 feet
Show answerHide answer
Correct answer: 60 feet
After the first job of the spool is left, and after the second job of that is left, so of the spool remains. Then gives feet. Subtracting both fractions from the whole spool () gives 240, but the is a fraction of what was left, not of the full spool. Undoing only the second job () stops at 40, and undoing only the first () gives 24.
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The exponent in applies only to the 3, so , while . Then , and . Reading as gives 15; squaring to get inside the parentheses gives ; adding before multiplying gives .
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Rewrite everything as powers of 2: and . Then . Adding instead of multiplying in the power rule turns into (giving 1) or into (giving 64); making both mistakes gives .
Which of the following has a value between 7.5 and 8?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Move each coefficient under the root by squaring it: , , , and . A value between 7.5 and 8 must have a square between 56.25 and 64, and only 60 qualifies. is about 7.35; rounding up to 2.5 makes look like 7.5. Rounding down to 1.6 makes look like 8, but is about 8.7.
A crew installed 160 feet of conduit per day. In March its daily output rose 25%. In April its daily output fell 30% from the March level. By what percent is April's daily output below the original 160 feet?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
March output is feet, and April output is feet. The drop from the original is feet, and . Netting the percents as ignores that the 30% is taken from the larger March figure. Dividing the 20-foot drop by the new value 140 gives , and reporting the 20-foot drop as 20% skips the division.
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Multiply first, using improper fractions: . Then . Multiplying whole parts and fraction parts separately () gives 5, and subtracting before multiplying gives . Subtracting the smaller fraction from the larger instead of borrowing gives .
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Division and multiplication go left to right. , then . Multiplying first and then dividing gives ; stopping after the division gives 2, and dividing the whole parts and the fraction parts separately (2 and 2, total 4) gives .
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The exponent applies only to the 2, so ; works left to right as ; and . The total is . Reading as gives 38, and multiplying before dividing gives . Squaring as gives .
Evaluate .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Square first: , so , and , giving a numerator of . The denominator is , so the value is . Treating as gives , and writing the denominator as gives . Multiplying before squaring gives and .
What number comes next in the series 2, 5, 10, 17, 28, 41, ...?
- A.50
- B.56
- C.58
- D.60
Show answerHide answer
Correct answer: 58
The gaps are 3, 5, 7, 11, 13, which are the prime numbers in order, so the next gap is the next prime, 17: . The first four terms also fit , which gives , but that rule predicts 26 for the 5th term, not 28. Reading the gaps as odd numbers gives , and skipping 17 gives 60.
In a geometric series, the 2nd term is 18 and the 5th term is . What is the 1st term?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Three steps take 18 to , so and . The 1st term is . Taking (losing the sign of the odd root) gives 54. Flipping the ratio to gives , and making both slips gives 6.
What number comes next in the series -1, 6, 25, 62, 123, ...?
- A.214
- B.184
- C.208
- D.216
Show answerHide answer
Correct answer: 214
Each term is two less than a cube: , , , , . The next term is . Writing 216 recognizes the cubes but forgets to subtract 2. The gaps 7, 19, 37, 61 grow by 12, 18, 24, so the next gap is 91; repeating the last gap of 61 gives 184, and repeating the growth of 24 gives 208.
What is the next term in the series 1, 2, 4, 6, 12, 15, 30, ...?
- A.31
- B.34
- C.33
- D.60
Show answerHide answer
Correct answer: 34
The steps alternate between adding and doubling, and the amount added goes up by 1 each time: +1, , +2, , +3, . The next step is +4, so the term is . Doubling 30 again gives 60, repeating the last addend gives 33, and restarting the addend at 1 gives 31.
The series 54, 36, 24, 16, ... continues with the same pattern. What is its 6th term?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Each term is of the one before (), so the 5th term is and the 6th is . Stopping at the 5th term gives . Taking away a third of 16 twice () gives , but each new third comes from the new term, and treating the gaps 18, 12, 8 as shrinking by 6, 4, 2, 0 gives 10 and then 4.
Which rule gives the nth term of the series , 2, , , ...?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The series falls by each time, so the rule is . Setting : , so and the rule is (check: gives 2). Using the first term as the constant gives , which makes the first term 2, and subtracting the step instead of adding it gives . The rule gives for but then increases.
What is the sum of the first 12 terms of the series 4, 2.5, 1, -0.5, ...?
- A.-51
- B.-102
- C.-69
- D.-60
Show answerHide answer
Correct answer: -51
The 12th term is 11 steps from the first: . The sum is . Taking 12 steps makes the last term and the sum , and forgetting to halve gives . Counting drops of 1.5 instead of gives .
What is the 6th term of the series 81, , 36, , ...?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Each term is times the one before, so the 5th term is and the 6th is . Dropping the alternating sign gives , and stopping one term early gives 16. Using the flipped ratio on 16 gives .
The series 5, 2, 9, 6, 13, 18, 17, 54, ... is two series interleaved. What is its 10th term?
- A.58
- B.21
- C.162
- D.54
Show answerHide answer
Correct answer: 162
The odd-position terms 5, 9, 13, 17 add 4, and the even-position terms 2, 6, 18, 54 multiply by 3. The 10th term is the 5th even-position term, . Continuing the odd-position series gives 21 (the 9th term), and adding 4 to 54 applies the wrong series' rule to give 58. Counting the 10th term as the 4th even-position term gives 54, which is the 8th term.
In the series 2, 3, 5, 8, 12, 17, ..., the amount added grows by 1 each time. What is the 14th term?
- A.80
- B.91
- C.107
- D.93
Show answerHide answer
Correct answer: 93
The amounts added are 1, 2, 3, ..., and reaching the 14th term takes 13 additions: . Add the starting value: . Answering 91 forgets to add the first term 2. Adding 14 gaps instead of 13 gives 107, the 15th term, and stopping at 12 gaps gives 80, the 13th term.
The five numbers , ___, ___, ___, form an arithmetic series. What is the middle (third) number?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
From the first number to the fifth is 4 steps, so each step is . The third number is two steps in: . Dividing by 5 numbers instead of 4 steps gives . Averaging the ends as (losing the negative sign) gives , and is only the second number.
The first term of a series is 3. Each term after that is found by multiplying the term before it by and then adding 5. What is the 7th term?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The terms are 3, , 7, , 23, , and then . Stopping at the 6th term gives , and multiplying without adding 5 on the last step gives 82. Subtracting 5 instead of adding it on the last step gives 77.
Series P is 5, 12, 19, 26, ... and series Q is 4, 13, 22, 31, .... Which of these numbers is a term of both series?
- A.54
- B.75
- C.103
- D.94
Show answerHide answer
Correct answer: 103
A term of P is 5 more than a multiple of 7, and a term of Q is 4 more than a multiple of 9. For 103, and , so it is in both series. The numbers 54 and 75 are in P (, ) but not in Q, because and are not multiples of 9. The number 94 is in Q (), but is not a multiple of 7, so it is not in P.
What is the 20th term of the series 0, 3, 8, 15, 24, ...?
- A.360
- B.400
- C.440
- D.399
Show answerHide answer
Correct answer: 399
Each term is one less than a perfect square: , and so on, so the nth term is . The 20th term is . Seeing the squares but dropping the minus 1 gives 400. The value 440 is the 21st term, , and 360 is the 19th term, .
Each term of a series is found by multiplying the term before it by 2 and then adding 4. If the 4th term is 52, what is the 1st term?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Work backward by undoing the steps in reverse order: subtract 4, then divide by 2. From 52 that gives 24 (3rd term), then 10 (2nd term), then 3 (1st term). Undoing only once or twice gives 24 or 10. Undoing in the wrong order (halve, then subtract 4) gives 22, then 7, then .
What is the 10th term of the series 4, 7, 21, 24, 72, 75, ...?
- A.2,052
- B.687
- C.684
- D.2,061
Show answerHide answer
Correct answer: 687
The series alternates adding 3 and multiplying by 3: , , (the 9th term), and (the 10th). Stopping at the 9th term gives 684, and multiplying by 3 at the 10th step instead of adding 3 gives 2,052. Running one term too far gives , the 11th term.
A series lists the prime numbers in increasing order: 2, 3, 5, 7, 11, .... How much greater is the 15th term than the 10th term?
- A.14
- B.20
- C.18
- D.22
Show answerHide answer
Correct answer: 18
Counting the primes: 2, 3, 5, 7, 11, 13, 17, 19, 23, 29 (10th), 31, 37, 41, 43, 47 (15th). The difference is . Counting 1 as a prime shifts the list and gives , and leaving out 2 gives . Counting 33 as a prime (it is ) gives .
In an arithmetic series, the 4th term is 20 and the 10th term is 41. What is the 1st term?
- A.6
- B.11
- C.13
- D.9.5
Show answerHide answer
Correct answer: 9.5
From the 4th term to the 10th term is 6 steps, so the common difference is . The 1st term is 3 steps before the 4th: . Dividing by 7 (counting terms instead of steps) gives a difference of 3 and a first term of 11. Stepping back 4 times because it is the 4th term gives 6.
What is the next term in the series 3, 20, 6, 17, 12, 14, 24, ...?
- A.11
- B.17
- C.21
- D.48
Show answerHide answer
Correct answer: 11
Two series are woven together. The 1st, 3rd, 5th and 7th terms (3, 6, 12, 24) double, and the 2nd, 4th and 6th terms (20, 17, 14) drop by 3. The next term is the 8th, which belongs to the second series: . Doubling 24 gives 48, the 9th term; subtracting 3 from 24 gives 21; adding 3 to 14 instead of subtracting gives 17.
What is the 8th term of the series 3, 4, 7, 13, 23, ...?
- A.59
- B.87
- C.77
- D.123
Show answerHide answer
Correct answer: 87
The gaps are 1, 3, 6, 10, and the gaps themselves grow by 2, 3, 4, so the next gaps are 15, 21 and 28. That gives 23 + 15 = 38, 38 + 21 = 59 and 59 + 28 = 87 for the 8th term. Assuming the gaps keep growing by the same 4 (14, 18, 22) gives 77, while 59 is the 7th term and 123 is the 9th.
Simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Dividing by is multiplying by : . Treating as leads to , but the reciprocal of a sum is not the sum of reciprocals. Dividing by instead of by gives .
For every whole number , the expression equals which of the following?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Rewrite everything in base 2: and . The exponent is , so the value is for every . Writing as (doubling only the ) gives 16; writing as gives 8; multiplying the bases gives .
Which polynomial is equivalent to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The product is , and . Subtracting the whole square gives . Writing as (no middle term) gives , and using as the middle term gives . Subtracting only the and adding the rest gives .
Use the formula . What is the value of P when and ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
First, , and 3 divided by 3 is 1. Next, , so . Then . Getting comes from giving the product of two negatives a negative sign, so is added instead of subtracted; comes from adding as -5, and comes from forgetting to divide by 3.
Use the formula , where . What is the value of A when ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
First find C: 6 - 3(-2) = 6 + 6 = 12. Then 4 - C = -8, its square is 64, and 64 divided by -2 is -32. So A = 2(-2) - (-32) = -4 + 32 = 28. Getting 4 comes from computing C as 6 - 6 = 0; getting -36 comes from subtracting 32 instead of -32 (losing the sign of B in the division), and -68 comes from squaring 4 - C as 16 - 144.
Simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The first part is . The product is . Subtracting every term gives . The result with comes from writing times as ; comes from applying the minus sign only to , and comes from dropping the term of the product.
Which expression is equivalent to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Factor out : . Moving the negative into turns it into , so the expression equals . The form applies the negative twice and expands to , every sign flipped. The forms and each have the wrong signs on some terms.
When is expanded and like terms are combined, what is the coefficient of ?
- A.6
- B.3
- C.15
- D.9
Show answerHide answer
Correct answer: 3
First . Multiplying by , the terms are and , so the coefficient is . Answering 9 squares term by term, , so the never appears; 15 writes as .
Simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Raise each factor to the power: , , , and in the denominator moves up as . The result is . Reading as is the classic negative-exponent error; leaving in the denominator forgets that the outer flips it.
For a whole number , simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The power of a power multiplies: , so the numerator is . Dividing subtracts the whole exponent: , so the result is . Writing as gives ; doubling only the 2 in (getting ) gives ; adding the denominator's exponent gives .
Which expression is equivalent to "the product of 3 and a number , subtracted from the square of 2 more than the number"?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
"Subtracted from" reverses the order: start with the square of 2 more than the number, , then subtract . The result is . subtracts in the order the words are read, ; expands as .
Which expression is equivalent to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Distribute each fraction: , , and . The x terms give and the constants give , so the result is . Leaving negative gives ; leaving negative gives , and making both slips gives .
What is the value of when and ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Numerator: and , so . Denominator: . The value is . comes from writing as ; comes from computing the denominator as .
For values of where it is defined, simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The numerator is a difference of squares, , and the denominator factors as . Cancel to get . cancels , the factor that is not shared; factors the denominator with the signs swapped, as .
What is the value of when ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Square first: , so . Next, , and subtracting it gives . Getting 20 comes from squaring as a whole, , then ; getting 2 comes from reading as -9, so becomes +18. Getting -2 comes from giving a negative sign, so .
For values of where it is defined, simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Factor: (check: ) and . Cancel the common factor to get . Cancelling instead keeps the wrong denominator and gives . Factoring the numerator with the signs swapped, as , produces the options, but that product is .
Which factored form is equivalent to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Factor out -3: . The trinomial needs factors whose outer and inner products add to , and works: . So the result is . Swapping the signs to gives in the middle. The form moves the negative into both binomials, where the two negatives cancel, so it expands to . has a constant of +2 inside, giving -6 instead of +6.
Simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Expand each square: and . Subtracting, the and terms cancel and . Squaring term by term, as both times, gives 0, and using for each middle term instead of gives .
Factor by grouping: .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Group the first two and last two terms: . The common binomial is , leaving , so the result is . Expanding confirms it: . The other choices expand with wrong signs, for example and .
Simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Work inside the brackets first: . Then , and adding gives . Writing the inside as (not distributing the inner minus) leads to ; multiplying only the by gives .
Simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Work inside the brackets first: . Then , and . Writing as makes the bracket and leads to ; multiplying only the first term of the bracket by gives , and making both slips gives .
Subtract the product from . Which expression is the result?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
First expand: . Then subtract every term: . Getting comes from applying the minus sign only to and leaving as is; comes from writing the last product -3 times 1 as +3, and comes from writing the middle term as .
Using the pattern , what is ?
- A.2491
- B.2497
- C.2509
- D.2494
Show answerHide answer
Correct answer: 2491
Write the factors as and . Then . 2509 adds instead of subtracting it; 2494 subtracts instead of ; 2497 subtracts 3 instead of 9.
Evaluate for .
- A.-8
- B.-26
- C.16
- D.-2
Show answerHide answer
Correct answer: -26
The exponent applies before the leading negative: . Then , so the value is . Answering treats as ; keeps the square right but writes as .
Simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Distribute each part: , , and . Combining gives , , and , so the result is . Leaving the unchanged inside the second group gives ; writing as gives .
Expand and simplify .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
and . Subtracting the whole product gives . Forgetting that the minus sign turns into gives ; squaring as with no middle term gives 13.
What is the solution set of ?
- A. only
- B. only
- C. or
- D. or
Show answerHide answer
Correct answer: only
Case 1: gives . Case 2: gives , so . Check both: at , and , so it works; at , the left side is 9 but the right side is , and an absolute value can never equal a negative number, so is extraneous. Keeping both case answers without checking is the usual mistake.
What is the sum of all solutions of ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Multiply by : , so and . The value makes the denominators zero, so it is extraneous and the only solution is 1. Keeping both roots gives a sum of 3; keeping only the rejected root gives 2; reading the sum from with the wrong sign gives .
A formula is . For which values of x is y negative?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The factor is never negative; it is zero at and positive everywhere else, so it cannot change the sign of y. The sign of y therefore comes only from , which is negative when . Treating the squared factor like a single factor makes the sign seem to switch at 4, giving . Reading the root of as 1 instead of -1 is a sign error.
y varies inversely with x. If x increases by 25%, by what percent does y decrease?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Inverse variation means stays constant, so multiplying x by multiplies y by . The new y is 80% of the old one, a decrease of 20%. Assuming the percent carries over unchanged gives 25%; 80% is the new value, not the decrease; and is the increase y would get if x dropped by 25%.
Two formulas use the same x: and . If x increases by 12, what happens to the difference ?
- A.It decreases by 11
- B.It decreases by 5
- C.It increases by 5
- D.It decreases by 8
Show answerHide answer
Correct answer: It decreases by 11
Over 12 units, y changes by and z changes by . The difference changes by , so it decreases by 11. Decreasing by 5 comes from adding the two changes () instead of subtracting, decreasing by 8 forgets that z also moves, and increasing by 5 drops the minus sign on .
A crew of 8 workers can finish a job in 9 days. After the crew has worked for 2 days, 4 more workers join, and everyone works at the same rate. How many more days will it take to finish the job?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The whole job is worker-days. After 2 days, worker-days are done, leaving 56. With 12 workers, that takes days. Dividing the whole job by 12 gives 6, which forgets the work already done; subtracting the 2 days from that gives 4. Ignoring the new workers gives .
What is the solution set of ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Square both sides: , so and . Check each: gives and , which works; gives but , so it is extraneous. Keeping both roots gives ; squaring as leads to and .
What is the product of the two solutions of ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
For , the product of the roots is and the sum is . Here the product is . Using c alone without dividing by a gives ; dropping the sign of c gives ; and 2 is , the sum of the roots, not the product.
A formula is . For which values of x is y positive?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
y is zero at x = 2 and x = -5. Test a value between them: x = 0 gives (2)(5) = 10, which is positive. Outside the roots one factor is negative, for example x = 3 gives (-1)(8) = -8, so y > 0 only for -5 < x < 2. Treating 2 - x as if it were x - 2 makes the outside regions look positive, and reading the roots as -2 and 5 is a sign error on both factors.
A formula is . Right now and , so R is negative. Which single change makes R positive?
- A.Decrease y by 1
- B.Increase x by 1
- C.Increase x by 0.5
- D.Decrease y by 0.5
Show answerHide answer
Correct answer: Increase x by 1
Now . Increasing x by 1 gives , which is positive. Decreasing y by 1 gives , which is zero, not positive. Increasing x by 0.5 gives (it looks positive only if the -1 is forgotten), and decreasing y by 0.5 gives (it looks positive only if the division by 4 is skipped).
z varies directly with x and inversely with the square of y. When and , . What is z when and ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Write . From , . Then . Forgetting to square y gives and . Ignoring y entirely halves 12 to 6, and multiplying by instead of dividing gives 24.
What is the greatest value of that satisfies ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Multiply every term by 6: , so and . Dividing by flips the sign: , so the greatest value is 6. Forgetting to multiply the right side by 6 gives , so 11; writing as gives , and as gives .
A journeyman can wire a panel alone in 5 hours. Working together, a journeyman and an apprentice wire it in 3 hours. How many hours would the apprentice take alone?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Rates add: . Then , so hours. Subtracting the times, , gives 2; adding them gives 8; averaging them gives 4. Times do not add or subtract; rates do.
In 6 years, a father will be 3 times as old as his daughter will be then. Six years ago, he was 7 times as old as she was then. How old is the father now?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Let the ages now be f and d. Then , so , and , so . Setting gives and (check: 54 is 3 times 18, and 42 is 7 times 6). Writing as gives , , and 27; giving the father's age in 6 years gives 54, and giving the daughter's age gives 12.
A formula is , and right now . What is the smallest whole number that k can be increased by so that I becomes negative?
- A.2
- B.4
- C.3
- D.5
Show answerHide answer
Correct answer: 3
I is negative when , which means . The smallest whole number above 4 is 5, which is an increase of 3 from and gives . An increase of 2 makes and , which is not negative. Answering 4 reports the boundary from as the increase, and 5 is the new value of k rather than the amount it went up.
In the formula , what value of k makes y decrease by 3 every time x increases by 2?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
A drop of 3 for every 2 to the right is a slope of , so . Multiplying both sides by 2 gives , so . Getting -3 comes from treating the slope as -3 (ignoring the 'every 2'), which gives ; 6 comes from using because the sign of 'decrease' was dropped, and comes from setting without clearing the denominator of 2.
How many liters of a 20% solution must be added to 30 liters of a 50% solution to make a 40% solution?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Amounts of pure substance add: . So , , and . Leaving the 30 liters out of the final volume, , gives 75; reporting the final total instead of the amount added gives 45; flipping the 10-to-20 ratio gives 60.
In the formula , for what value of b is a equal to zero?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Set and subtract 5: . Multiply both sides by to get , then add 6 (which is ) to get . Stopping at forgets the last step of adding 6 back, and comes from applying the only to b and not to the -6. The value comes from multiplying -5 by instead of by its reciprocal .
A formula is . As x increases by 1, what happens to y?
- A.y increases by
- B.y decreases by
- C.y decreases by
- D.y increases by
Show answerHide answer
Correct answer: y decreases by
Distribute first: , so . The coefficient of x is , so each 1-unit increase in x lowers y by . Decreasing by comes from forgetting to multiply by the 2 inside the parentheses, increasing by drops the minus sign, and increasing by comes from working out first, which breaks the order of operations.
Which value of x is NOT a solution of ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The inequality splits into or , so or . The value falls between and 3: , which is less than 7. Both endpoints are solutions because the sign includes equality ( and ), and gives . Forgetting to flip the sign in the negative case gives , which wrongly includes .
Solve for a.
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Subtract vt: . Multiply by 2 and divide by : . Multiplying only s by 2 gives (the 2 must multiply the whole side). Dividing by 2 instead of multiplying gives , and dividing by t instead of leaves a stray t.
Solve for : .
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Multiply every term by 12: , so . That gives , so and . Writing as (not distributing the negative) gives 2. Subtracting the numerators without scaling them to twelfths, , gives 15, and doing that while also writing as gives 11.
What are all the solutions of ?
- A. or
- B. or
- C. or
- D. or
Show answerHide answer
Correct answer: or
Isolate the absolute value first: . Then gives , and gives , so . Writing the second case as gives , a sign slip that just mirrors the first answer. Subtracting 2 instead of adding it sets and gives 1 and .
A formula is . As t increases by 1, what happens to P?
- A.P decreases by 2
- B.P decreases by 4
- C.P increases by 10
- D.P stays the same
Show answerHide answer
Correct answer: P stays the same
Expand: . The t-terms cancel because , so P equals for every value of t and does not change. Decreasing by 2 comes from dropping the term, decreasing by 4 comes from reading as , and increasing by 10 comes from losing the minus sign in front of the 5.
Which inequality is equivalent to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Distribute: . Subtract and 3: . Dividing by reverses the sign, so . Keeping the after dividing by a negative gives ; writing as gives , so , and making both mistakes gives .
A formula is . For which values of b is a positive?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Set : , so . Dividing by flips the inequality and gives . Check: gives , which is positive, and gives . Answering means the inequality sign was not flipped when dividing by a negative number, and comes from multiplying 6 by instead of dividing by it.
The graph of a linear function f passes through and . Which describes the graph of ?
- A.slope and y-intercept
- B.slope and y-intercept
- C.slope and y-intercept
- D.slope and y-intercept
Show answerHide answer
Correct answer: slope and y-intercept
f has slope and , so . Solving gives . Dividing only the x by 2 gives an intercept of , and keeping the original slope 2 forgets that the inverse swaps rise and run.
A parabola crosses the x-axis at and and crosses the y-axis at . What is the y-coordinate of its vertex?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Write . At , , so . The axis of symmetry is halfway between the zeros, at , and . Leaving out the leading coefficient gives . Placing the axis at (a sign slip when averaging and 3) gives , and is the y-intercept, not the vertex.
A tank drains at a constant rate. Three minutes after draining starts it holds 150 gallons, and eight minutes after draining starts it holds 110 gallons. A second tank holds 120 gallons at the moment the first tank starts draining, and it drains at 2 gallons per minute starting at that same moment. How many minutes after draining starts will the two tanks hold the same amount?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The first tank loses gallons in minutes, or 8 gallons per minute, so it started with gallons. Setting gives , so (both tanks then hold 102 gallons). Using 150 as the starting amount gives 5; dividing 40 by 8 instead of 5 (a rate of 5) gives 15; and counting from the first reading instead of from the start gives 6.
What is the domain of ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The radicand must be positive, not just nonnegative, because the root sits in the denominator: , so , and dividing by flips the sign to . Allowing makes the denominator . Forgetting to flip the inequality when dividing by gives , and ignoring the coefficient 2 gives .
A graph shows a straight line through the points and . Which equation describes the line?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The slope is . Using : , so and , which is after multiplying by 2. comes from writing as -6, so ; comes from dropping the slope's sign, and comes from putting the change in x over the change in y.
A graph shows a parabola that crosses the x-axis at x = -1 and x = 5 and crosses the y-axis at (0, -10). Which equation matches the graph?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
A crossing at x = -1 gives the factor (x + 1) and a crossing at x = 5 gives (x - 5). With no multiplier, x = 0 gives (1)(-5) = -5, so the multiplier must be 2 to reach -10. Writing (x - 1)(x + 5) uses the intercepts with the wrong signs; it still gives -10 at x = 0, but it crosses at x = 1 and x = -5. Subtracting 5 fixes the y-intercept but shifts the curve down, so it no longer crosses the x-axis at -1 and 5.
A rule says: subtract a number x from 10, divide the result by 4, then add the original number x. Which equation gives the output y?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The rule is y = (10 - x)/4 + x. Write x as 4x/4 and combine: (10 - x + 4x)/4 = (3x + 10)/4. Check with x = 2: (10 - 2)/4 + 2 = 4, and (6 + 10)/4 = 4. Using (x - 10) subtracts in the wrong order and gives (5x - 10)/4, and dividing only the x by 4 (10 - x/4 + x) gives (3x + 40)/4.
The graph of a function f is a parabola that opens downward, has its vertex at , and crosses the x-axis at and . Which statement is true?
- A.f is increasing for , and
- B.f is increasing for , and
- C.f is increasing for , and
- D.f is increasing for , and
Show answerHide answer
Correct answer: f is increasing for , and
A downward parabola rises until the vertex and falls after it, so f increases for . Since the graph crosses the x-axis at 1 and keeps falling to the left of it, is below the axis; the rule is , so . Picking comes from assuming a high vertex keeps the graph positive, and picking confuses this with an upward parabola.
Two towns each have 20,000 residents. Town A gains 1,000 residents every year. Town B grows by 5% every year. After 2 years, how many more residents does Town B have than Town A?
- A.0
- B.100
- C.50
- D.2,050
Show answerHide answer
Correct answer: 50
Town A has . Town B has after one year and after two, so B has 50 more. Taking 5% of the original 20,000 each year (linear growth) gives the same 22,000 and a difference of 0. Assuming B pulls ahead by 50 in each of the two years gives 100, and 2,050 is B's total gain, not the gap.
A graph shows a straight line through the points and . Which description matches the line?
- A.It falls 3 units for every 2 units to the right and crosses the y-axis at 10.
- B.It rises 3 units for every 2 units to the right and crosses the y-axis at 10.
- C.It falls 2 units for every 3 units to the right and crosses the y-axis at 4.
- D.It falls 3 units for every 2 units to the right and crosses the y-axis at 4.
Show answerHide answer
Correct answer: It falls 3 units for every 2 units to the right and crosses the y-axis at 4.
The slope is , so the line falls 3 for every 2 to the right. Using : , so . Crossing at 10 comes from writing as -3, so ; the rising version comes from dropping the sign of the slope, and 'falls 2 for every 3' comes from putting the change in x over the change in y.
If , which expression is equal to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Replace every x with : , which combines to . Writing instead of gives . Multiplying the by a but dropping the it should produce from the 1 gives , and squaring as gives .
A table gives values of an exponential function: when x is 1, 2 and 4, y is 96, 48 and 12. Which equation fits every row of the table?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
From x = 1 to x = 2, y is halved, so the base is ; x = 2 to x = 4 is two steps, , which agrees. At x = 1, , so and . Treating the drop from 48 to 12 as a single step gives a base of and , which misses x = 2; using 96 or 48 as the starting amount forgets that the table does not begin at x = 0.
A line is perpendicular to the line and passes through the point . What is the y-intercept of this line?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Solving for y gives , so the given slope is and the perpendicular slope is . Then , so . Taking the reciprocal without changing the sign (slope ) gives , so 7; using the parallel slope gives ; and computing b as instead of gives .
The line passes through the point . What is the slope of the line?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Substitute the point: , so and . The line is , or , so the slope is . Giving k itself, 4, stops one step early. Forgetting that moving across makes it negative gives 2, and writing the slope as flips the fraction.
A line on a graph crosses the x-axis at (6, 0) and the y-axis at (0, -4). Which equation describes this line?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Set y = 0 to read each option's x-intercept and x = 0 to read its y-intercept. For 2x - 3y = 12, y = 0 gives x = 6 and x = 0 gives y = -4, matching both crossings. The equation 2x + 3y = 12 has the right x-intercept but crosses the y-axis at +4, losing the negative sign. The equation 3x - 2y = 12 crosses at x = 4 and y = -6, which swaps the two numbers, and 3x - 2y = -12 crosses at x = -4 and y = 6, which reads each intercept off the wrong axis.
Which equation describes the line through that is perpendicular to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The given line is , so a perpendicular slope is the negative reciprocal, . Then gives . Flipping the fraction without changing the sign gives slope , keeping gives the parallel line, and adding 5 instead of subtracting it gives .
What is the vertex of the graph of ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
The vertex is at . Then , so the vertex is . Dropping the minus in gives and the point . Using without the 2 gives , which is where the graph returns to the y-intercept's height of 10. A sign slip on gives .
The total charge C, in dollars, for a repair job is a linear function of the hours worked, h. A 2.5-hour job costs 230 dollars and a 4-hour job costs 335 dollars. Which statement describes the C-intercept of this function?
- A.It is 70 dollars, the amount added for each hour of work
- B.It is 55 dollars, the amount added for each hour of work
- C.It is 70 dollars, the fee charged before any hours are worked
- D.It is 55 dollars, the fee charged before any hours are worked
Show answerHide answer
Correct answer: It is 55 dollars, the fee charged before any hours are worked
The rate is dollars per hour. Then , so and the intercept is the 55 dollars charged when , a flat fee before any hours. The 70 dollars is the slope, the hourly rate, so calling 70 the intercept mixes up the two parts, and calling 55 an hourly charge gets the value right but the meaning wrong.
What is the average rate of change of from to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Average rate of change is . Here and , so . Stopping at the change in output gives 9, dividing by gives , and reading as gives .
A table gives values of a function: when x is 0, 1, 2 and 3, y is 3, 4, 7 and 12. The pattern continues. What is y when x is 6?
- A.27
- B.39
- C.15
- D.9
Show answerHide answer
Correct answer: 39
The first differences are 1, 3 and 5, and they grow by 2 each time, so the rule is quadratic: . Then (or keep extending the differences 7, 9, 11 to get 19, 28, 39). Adding the last difference of 5 three more times gives 27, and computing instead of gives 15. Using the line through the first two points, , gives 9.
Let and . What is the smallest whole number x for which is greater than ?
- A.3
- B.6
- C.7
- D.10
Show answerHide answer
Correct answer: 7
Compare row by row: at , and , so g is still smaller; at , and , so x is 7. Reading as makes g pass f already at (1,000 against 250). Comparing 320 with and forgetting the gives 6, and dropping the 5 in front of gives 10.
The cost C, in dollars, of a service call lasting h hours satisfies . Which describes the cost?
- A.a 75-dollar fee plus 60 dollars per hour
- B.a 150-dollar fee plus 60 dollars per hour
- C.a 30-dollar fee plus 75 dollars per hour
- D.a 75-dollar fee plus 30 dollars per hour
Show answerHide answer
Correct answer: a 75-dollar fee plus 30 dollars per hour
Solve for C: , so . The constant term is the fee charged at (75 dollars), and the slope is the hourly rate (30 dollars). Reading the numbers straight from the equation without dividing by 2 gives a 150-dollar fee and 60 dollars per hour, and dividing only the constant by 2 gives 75 and 60. Swapping slope and intercept gives a 30-dollar fee and 75 per hour.
Which equation describes the line that passes through and is parallel to ?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Solving for y gives , so the slope is . Through : , so , which is . comes from writing instead of for the point; comes from taking the slope as (forgetting the minus when moving across), and comes from using , the flipped slope.
The table shows four points on a straight line, listed out of order. Which equation fits every row?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Using and , y falls 3 while x rises 4, so the slope is . From : , so , and becomes ; check : . Getting 25 comes from adding instead of subtracting when solving for b from , and comes from the inverted slope . The form has a positive slope, which comes from pairing a rise of 6 with a run of 8 instead of -8 when stepping from back to .
The table pairs each input x with an output y. Which rule produces every output in the table?
- A.Subtract 5 from x, then divide the result by 2.
- B.Divide x by 2, then subtract the result from 5.
- C.Subtract 10 from x, then divide the result by 2.
- D.Double x, then subtract 5 from the result.
Show answerHide answer
Correct answer: Subtract 10 from x, then divide the result by 2.
The table gives (slope , y-intercept -5), which equals , so subtracting 10 and then halving works: and . Subtracting 5 before halving gives , which moves the 5 inside the division without doubling it; at it gives -2.5, not -5. Halving x and subtracting the result from 5 reverses the subtraction and makes , and doubling x uses run over rise (2) as the slope instead of rise over run.
The table shows how y changes as x increases. Which equation fits every row of the table?
- A.
- B.
- C.
- D.
Show answerHide answer
Correct answer:
Each y is double the one before, so . At , , so , and then checks the last row. Taking uses the y-value at as the starting value, but the starting value is the y-value at , so that equation gives 12 at . The equation fits the first two rows and then gives 18 instead of 24, and swapping base and multiplier to gives 6 and then 18.
Reading Comprehension (130)
Read the passage, then answer the question. Related classroom instruction is a required part of the apprenticeship, and attendance is taken at every session. An apprentice who arrives more than fifteen minutes after the start of class, or leaves more than fifteen minutes early, is recorded as absent for half of that session. Instructors record attendance on a sign-in sheet that each apprentice must initial, and an apprentice who forgets to initial it is treated as absent unless the instructor corrects the sheet that night. Each apprentice may miss up to three sessions in a school year without penalty. Two half absences count as one full absence toward that limit. The committee does not distinguish between excused and unexcused absences; a session missed because of illness counts toward the three in the same way as one missed because of an overslept alarm. Apprentices are therefore encouraged to save their allowed absences for real emergencies rather than spend them early in the year. Every absence beyond the third must be made up within two weeks, either by attending the matching session with another class section or by completing an instructor-approved makeup assignment. Makeup sessions are offered only on weeknights, so apprentices working out of town should arrange an assignment instead. An assignment must be turned in to the instructor who taught the missed session. Absences that are not made up within two weeks are reported to the apprenticeship committee. An apprentice with more than two unresolved absences in one year will not advance to the next year of classes until they are cleared, which also delays the wage increase tied to advancement. Apprentices who believe an absence was recorded in error may ask the instructor to review the sign-in sheet. Which statement must be true according to this section of the handbook?
- A.An apprentice can use all three allowed absences without missing a full class.
- B.An apprentice's fourth absence keeps that apprentice from advancing a year.
- C.An apprentice who misses class with a doctor's note is not charged an absence.
- D.An apprentice who fails to initial the sheet is marked absent for that session.
Show answerHide answer
Correct answer: An apprentice can use all three allowed absences without missing a full class.
The first paragraph records arriving more than fifteen minutes late as half an absence, and the second says "two half absences count as one full absence" toward the three allowed, so six late arrivals use up all three without missing a whole session. The initialing rule has an exception ("unless the instructor corrects the sheet that night"), and a fourth absence can be made up; only more than two unresolved absences block advancement. Illness counts like any other absence, so a doctor's note changes nothing.
Read the passage, then answer the question. When most people picture a bee, they picture a honeybee. Yet North America has roughly 4,000 species of native bees, and most of them look and live nothing like honeybees. Most native bees do not live in hives or make honey. Instead, each female builds her own small nest, stocks it with pollen, and lays her eggs there. Many native bees rarely sting, and some are smaller than a grain of rice. Native bees are also strong pollinators. Some, such as bumblebees, can shake pollen loose from flowers like tomatoes that honeybees handle poorly, and many fly in cooler, cloudier weather than honeybees will. In some orchards, a few hundred mason bees can pollinate as many trees as thousands of honeybees, because the mason bees carry pollen loosely on their bellies and drop more of it on each blossom. Where these bees nest surprises many gardeners. Roughly 70 percent of native bee species dig their nests in the ground, usually in bare, sunny, well-drained soil. Most of the rest nest in hollow plant stems or in old beetle holes in dead wood. A yard can be full of flowers, then, and still give most native bees no place to raise young if every patch of soil is covered in lawn or mulch and every dead stem is cut down. Making room for nests is cheap. Leave a few square feet of soil bare in a sunny spot, and leave some stems standing through winter. Drilled wood blocks help the stem nesters, though they need cleaning or replacing every couple of years or they can spread mites and disease. The ground nesters, the larger group, gain nothing from them. Which statement best expresses the main idea of the third paragraph?
- A.Bare soil and standing stems give native bees the spots they need to nest.
- B.A yard rich in flowers still fails native bees if it lacks spots to nest.
- C.Most native bee species nest in the ground rather than in stems or in wood.
- D.Most native bees nest in soil, so lawns should be swapped for bare ground.
Show answerHide answer
Correct answer: A yard rich in flowers still fails native bees if it lacks spots to nest.
The third paragraph gives the nesting facts and then draws its point with "then": a yard "full of flowers" can still give most native bees "no place to raise young." The ground-nesting share is a supporting detail of that paragraph, not its main idea. Leaving bare soil and stems is the advice of the fourth paragraph, and replacing lawns goes far beyond the "few square feet" the passage suggests.
Read the passage, then answer the question. Battery packaging often lists a capacity, a number that describes how much charge the battery can hold. A higher number means more stored charge, in the same way a larger fuel tank holds more gasoline. Many shoppers compare packs by this one figure, but capacity alone does not tell a buyer how long a device will run. Picture a water tank with a faucet at the bottom. The size of the tank is like the battery's capacity, and how far the faucet is opened is like the amount of current a device draws. A large tank with the faucet wide open can run dry sooner than a small tank with the faucet barely cracked. In one way, though, the tank picture makes batteries look better than they are. Water drains out completely no matter how fast it flows, but many common batteries do not give up all of their charge under a heavy draw. The chemical reactions inside cannot keep pace, so part of the stored charge is never delivered before the voltage drops too low for the device. A battery that is pulled on hard therefore loses twice: it empties faster, and it delivers less in total. That is why the same battery may last for months in a television remote but only a few hours in a toy car with a motor and lights. The capacity printed on a package is usually measured under a light, steady draw, so it says more about the remote than about the toy. Some makers now print expected run times for typical devices, which can be a more useful guide for heavy-use products. What is the third paragraph mainly meant to do?
- A.To show that the tank comparison overstates how quickly batteries drain
- B.To explain why labels list capacity measured at a light, steady draw
- C.To show that a fast draw also cuts how much charge a battery delivers
- D.To argue that the capacity on a label misleads most battery buyers
Show answerHide answer
Correct answer: To show that a fast draw also cuts how much charge a battery delivers
The third paragraph says the tank picture "makes batteries look better than they are," because under a heavy draw "part of the stored charge is never delivered," so the battery "empties faster, and it delivers less in total." The idea that the comparison overstates how quickly batteries drain reverses this: the paragraph says the picture is too kind, not too harsh. The light, steady test draw is a detail from the fourth paragraph, and the passage never calls labels misleading for most buyers.
Read the passage, then answer the question. About three-quarters of the world's leading food crops depend at least partly on animals to carry pollen from flower to flower. Bees do most of this work, but flies, moths, butterflies, beetles, and some birds and bats also help. Without them, many fruits, nuts, and vegetables would yield far less, and some, such as almonds and blueberries, would barely produce a crop at all. Staple grains such as wheat and rice are pollinated mainly by wind, so they are less affected. Many of these pollinators are in decline. Honeybees get the most attention, yet their numbers in managed hives have held fairly steady, because beekeepers replace lost colonies by splitting strong ones. Wild bees, butterflies, and other pollinators have no keeper to rebuild their numbers, and studies in North America and Europe have found many such species growing scarcer. No single cause explains the trend. Loss of flowering habitat, heavy use of some pesticides, parasites and diseases, and shifting weather patterns each play a part. The causes also combine, so that a colony weakened by poor food is less able to fight off disease, and a sick colony gathers less food. Because the causes are many, so are the remedies. Farmers can plant strips of wildflowers along field edges and time their spraying to avoid hours when bees are foraging. Towns can mow roadsides less often. Homeowners can grow native plants that bloom at different times of the season. Studies of wildflower strips have found more wild bees visiting nearby crops, though researchers caution that no one step is enough to reverse the decline on its own. Which sentence best states the central idea of the passage?
- A.Pollinators face several linked threats, but beekeepers can easily replace lost colonies.
- B.Pollinators face several linked threats, and each one worsens the harm of others.
- C.Pollinators face several linked threats, so wildflower strips can end the decline.
- D.Pollinators face several linked threats, so many groups each have a part to play.
Show answerHide answer
Correct answer: Pollinators face several linked threats, so many groups each have a part to play.
The passage moves from the decline to its many causes and then states, "Because the causes are many, so are the remedies," listing roles for farmers, towns, and homeowners. That the causes worsen one another is true but is the point of the third paragraph only. Beekeepers replacing colonies applies only to managed honeybees, and wildflower strips cannot end the decline because researchers say "no one step is enough."
Read the passage, then answer the question. At a crowded diner last spring, a man at the counter suddenly stopped talking and put a hand to his throat. Several people noticed. One asked whether he was all right, and when he nodded weakly, the others went back to their meals. Nearly a minute passed before a server realized he was not breathing and stepped in. Afterward, several diners said they had assumed someone closer to the man would know what to do. The diners were not careless. Like many people, they did not know how to tell a mild blockage from a severe one, and the man's nod seemed to settle the question. A person who can cough hard, speak, or breathe is moving air, and the best help is to encourage the coughing. A person who cannot speak, cough, or breathe, or who can make only a weak, high-pitched sound, needs help right away, even if he or she signals being fine. Training groups do not all teach the same response to a severe blockage in an adult. Some teach firm blows between the shoulder blades alternated with abdominal thrusts; others teach abdominal thrusts alone. In an abdominal thrust, the helper stands behind the person, places a fist just above the navel, grasps it with the other hand, and pulls sharply inward and upward. Both methods aim to force air up through the windpipe, and either is far better than waiting. If the person stops responding, lower him or her to the floor, call for emergency help, and begin CPR if trained. Anyone who has needed abdominal thrusts should be checked by a doctor afterward, because the thrusts themselves can cause injury. Which statement best expresses the main idea of the passage?
- A.Bystanders must recognize a severe blockage in order to act in time
- B.Bystanders often fail to help because they are careless or distracted
- C.Experts disagree about the right way to clear an adult's blocked airway
- D.A server's quick action saved a choking man at a crowded diner
Show answerHide answer
Correct answer: Bystanders must recognize a severe blockage in order to act in time
The story shows bystanders who missed the signs, the second paragraph teaches how to "tell a mild blockage from a severe one," and the rest explains what to do, so recognizing a severe blockage in order to act is the main idea. The passage says outright that "The diners were not careless." The difference between training groups is one detail of the third paragraph, which stresses that "either is far better than waiting," and the server's rescue is only the opening example.
Read the passage, then answer the question. For years, a lawn-care company in a northern town hired a new crew every spring. Most of the previous year's workers had found winter jobs elsewhere and did not come back; some years, fewer than half returned, so each season began with weeks of training. Training took time away from paying jobs, and mistakes by new workers sometimes meant redoing work for unhappy customers. The owners estimated that each new hire cost about two weeks of an experienced worker's time. Six years ago, the owners bought two used plows, partly with borrowed money, and began offering snow removal to the same commercial customers whose lawns they already mowed. The new service brought in less money than summer work, but it let the company keep five experienced workers on the payroll all year. The first winter nearly ended the experiment. Snowfall was light, the plows sat idle for weeks, and the owners talked seriously about selling them. One of the five workers quit that winter for a factory job with steadier hours. The owners decided to try one more season, and the next two winters brought closer to normal snowfall. Today the snow contracts barely cover the cost of the plows, fuel, and winter wages. The owners still call the decision one of their best. Most of their workers now start each spring already trained, and the owners say the savings on hiring and the steadier quality of work have been worth more than the snow contracts themselves. Customer complaints in spring, once a regular headache, have dropped sharply, and the owners no longer budget weeks of training each April. Which statement best expresses the main lesson the owners draw from their experience?
- A.Winter work is worth it mostly for the snow contracts it brings in each year.
- B.Winter work is worth it mostly for the hiring costs it saves in the spring.
- C.Winter work is worth it mostly by keeping the same five workers year after year.
- D.Winter work is worth it mostly once the winters bring normal snowfall again.
Show answerHide answer
Correct answer: Winter work is worth it mostly for the hiring costs it saves in the spring.
The owners say "the savings on hiring and the steadier quality of work have been worth more than the snow contracts themselves," which, with the contracts that "barely cover" their costs, makes the spring savings the point. The option about keeping the same five workers is close but overstated, since one of the five "quit that winter for a factory job"; the normal-snowfall option names a turning point in the third paragraph, not the owners' lesson.
Read the passage, then answer the question. When a cut is bleeding heavily, the most useful thing a bystander can do is press on it. Place a clean cloth, gauze pad, or even a folded shirt directly over the wound and push down firmly with the flat of the hand. Steady pressure squeezes the damaged vessels and gives the blood a chance to thicken and form a clot. Gloves, if they are at hand, protect the helper, but the search for them should not delay the pressure. A common error comes a minute or two later. Worried about whether the bleeding has stopped, the helper peels the cloth back to look. Doing so can tear away the clot that was just starting to form, and the bleeding may start again as heavily as before. If blood soaks through, the better choice is to place a second pad on top of the first and keep pressing, leaving the soaked pad where it is. Pressure should be held without a break for at least ten minutes, timed by a clock rather than by guesswork, since a few minutes can feel much longer under stress. A helper who lets up partway, even briefly, should start counting the ten minutes again from that point. If the helper tires, a second person can slide a hand on top and take over without the pressure ever stopping. Call for emergency help if blood is spurting, if it keeps flowing after ten minutes of firm pressure, or if the injured person becomes pale, confused, or faint. While waiting, keep pressing; the pressure is still doing its work. Which statement would the author most likely agree with?
- A.Lifting the cloth after ten minutes is the best way to see if a clot has formed.
- B.Swapping a soaked pad for a fresh one keeps the pressure on the cut steady.
- C.Adding a pad on top of a soaked one does not restart the ten-minute count.
- D.Bleeding that slows within ten minutes rarely calls for emergency help.
Show answerHide answer
Correct answer: Adding a pad on top of a soaked one does not restart the ten-minute count.
The second paragraph says to place a second pad "on top of the first and keep pressing," and the third says the count restarts only when a helper "lets up," so stacking a pad without releasing pressure leaves the count running. The passage never recommends lifting the cloth to check, even after ten minutes, and it warns that peeling it back can tear the clot. Swapping pads means removing the soaked one, which the passage says to leave in place, and emergency help is still needed if the person turns pale, confused, or faint.
Read the passage, then answer the question. When Marco Ellis started his house painting company, he won about four of every five jobs he bid on. He figured each price by adding up paint, supplies, and his crew's wages, then adding 10 percent on top. Customers liked his numbers, and by his first spring his calendar was booked months ahead. Other painters in town grumbled that he was underpricing the market, but Ellis took the steady work as proof that his method was sound. By the end of his second year, though, Ellis had less money in the bank than when he started. His first guess was that his crew was working too slowly, so for a month he timed every job against his estimate. The crew finished on schedule nearly every time, and the timing showed no pattern of waste. It was his bookkeeper who found the gap. Some costs never showed up on any single job: insurance, the van payment, fuel, the unpaid evenings Ellis spent writing estimates, and the days lost to rain. Together they ran close to 2,000 dollars a month, and his 10 percent margin covered less than half of that. Each job looked profitable on paper, but the jobs together did not pay for the business that carried them out. Ellis now divides a year's worth of these costs across the days he expects to work and adds that share to every bid before setting his margin. He wins only about half of his bids, and at first it worried him to watch some regular customers hire cheaper painters. By the end of the following year, however, his bank balance was rising for the first time. Which title best fits the passage?
- A.A Busy Painter Learns to Win Fewer, Better Jobs
- B.A Busy Painter Learns His Crew Was Not at Fault
- C.A Busy Painter Finds That Low Bids Win Customers
- D.A Busy Painter Finds the Hidden Costs His Bids Left Out
Show answerHide answer
Correct answer: A Busy Painter Finds the Hidden Costs His Bids Left Out
The passage is built around the costs "that never showed up on any single job," which explained why a full calendar still lost money, and around Ellis adding "that share to every bid." Winning fewer jobs is a result he worried about, not a lesson he set out to learn, so that title names a side effect. The crew finding fits only the second paragraph, and low bids winning customers is only the opening situation.
Read the passage, then answer the question. When the Brooklyn Bridge opened in 1883, it had the longest suspension span in the world and was the first fixed crossing of New York's East River. Building it took fourteen years, and its designer, John A. Roebling, never saw it built. He died in 1869 from an infection after his foot was crushed while he was surveying the site, before construction had begun. His son, Washington Roebling, who had worked beside his father on earlier bridges, took over as chief engineer that same year. In 1872 he was disabled by decompression sickness after working in the pressurized chambers used to dig the tower foundations beneath the river. Several workers suffered the same illness, which at the time was poorly understood, and for most of the remaining years he was too ill to visit the site. Washington directed the work from a room overlooking the river, and the plans and decisions remained his. His wife, Emily Warren Roebling, carried his instructions to the engineers. She studied engineering so thoroughly that she handled much of the daily communication with the builders and met with officials who came to the house for information. When some officials pushed to replace her husband late in the project, the effort failed, and he kept his post until the bridge opened. At the opening ceremony, Emily Roebling was the first person to ride across the finished bridge, and more than 150,000 people walked across it on its first day. Six days after the opening, a rumor that the bridge was collapsing set off a deadly crush on a crowded stairway, but the structure itself held. A plaque on the bridge today honors all three Roeblings for their part in its construction. Which statement is best supported by the passage as a whole?
- A.Washington Roebling served as the chief engineer for about fourteen years.
- B.Emily Roebling made the bridge's main decisions for its last eleven years.
- C.John Roebling oversaw the digging of the foundations for the first towers.
- D.Officials replaced Washington Roebling a short time before the bridge opened.
Show answerHide answer
Correct answer: Washington Roebling served as the chief engineer for about fourteen years.
Washington took over "that same year" his father died, 1869, and the third paragraph says "he kept his post until the bridge opened" in 1883, so he was chief engineer for about fourteen years. The eleven-year claim about Emily borrows the right span (1872 to 1883) but the passage says "the plans and decisions remained his," meaning Washington's. John died before construction began, and the push to replace Washington failed.
Read the passage, then answer the question. Corvane warrants its portable pressure washers against defects in materials and workmanship for two years from the date of purchase. If a covered defect appears during that period, Corvane will repair the unit or, if repair is not practical, replace it with a comparable model at no charge. A replacement unit is covered only for whatever time remains on the original warranty. This warranty does not apply to every problem a unit may develop. Parts that wear out through normal use, such as spray tips, hoses, and seals, are excluded. So is damage that results from running the washer without water or from using fuels or chemicals not approved in the manual. Units used for commercial or rental purposes are covered for 90 days instead of two years, whoever owns them. To make a claim, the owner must present the original receipt or other proof of the purchase date and return the unit to an authorized service center. Corvane is not responsible for lost work time, the rental of a substitute unit, or other costs that result from a breakdown. Shipping costs to the service center are the owner's responsibility. Owners can extend the life of a unit by flushing it with clean water after each use and storing it where it will not freeze. Freezing can crack the pump, and that damage is treated as a result of improper care rather than a defect. Which of the following claims would Corvane have to honor under the warranty?
- A.A homeowner who rents the washer out to neighbors reports a pump defect at 6 months.
- B.A homeowner reports a pump defect at 14 months and shows a bank statement with the date.
- C.A homeowner reports a split hose at 9 months and shows the original store receipt.
- D.A homeowner with a covered defect at 11 months claims the cost of a rental washer.
Show answerHide answer
Correct answer: A homeowner reports a pump defect at 14 months and shows a bank statement with the date.
The third paragraph accepts "the original receipt or other proof of the purchase date," so a pump defect at 14 months backed by a bank statement showing the date falls inside the two-year term and must be honored. Renting the washer out is a "rental purpose," limited to 90 days "whoever owns" the unit, and hoses are excluded as wear parts even with a receipt. Corvane is "not responsible for" the rental of a substitute unit, so that claim fails even though the defect itself is covered.
Read the passage, then answer the question. Two kinds of heat illness are common among people who work outdoors in summer, and they call for very different responses. Heat exhaustion develops when the body loses too much water and salt through sweat. A worker with heat exhaustion is usually sweating heavily and may feel weak, dizzy, or nauseated, with a headache and cool, clammy skin. Heat stroke is far more dangerous. It occurs when the body's cooling system can no longer keep up, and the core temperature climbs high enough to harm the brain and other organs. Many people learn that a heat stroke victim has hot, dry skin, but that sign is unreliable: a worker who collapses during hard physical labor may still be sweating. The more dependable warning is a change in the mind, such as confusion, slurred speech, or strange behavior, and a worker who shows it should be handled as a heat stroke case. Heat exhaustion can usually be treated on the spot. Move the worker to shade, loosen tight clothing, apply cool, wet cloths, and give sips of water. If symptoms worsen or do not improve within an hour, get medical help, because untreated heat exhaustion can progress to heat stroke. Heat stroke is a medical emergency. Call 911 at once, and while waiting, cool the person as quickly as possible with cold water, wet cloths, or ice packs. Do not try to give water to a person who is confused or unconscious. Which statement would the author most likely agree with?
- A.A sweating worker who becomes confused should rest in the shade and be watched for an hour.
- B.A worker with cool, clammy skin can safely be ruled out as a possible heat stroke case.
- C.A sweating worker who becomes confused should not be handed water to drink right away.
- D.A worker whose heat exhaustion eases within the hour should still be seen by a doctor.
Show answerHide answer
Correct answer: A sweating worker who becomes confused should not be handed water to drink right away.
The second paragraph says a heat stroke victim "may still be sweating" and that a worker showing confusion "should be handled as a heat stroke case," and the last paragraph says not to give water to a person who is confused, so the author would agree that a sweating, confused worker should not be handed water. Resting in shade and watching for an hour is the heat exhaustion response, which the sweating tempts a reader to apply. Clammy skin cannot rule out heat stroke because skin signs are called unreliable, and the passage calls for medical help only if symptoms worsen or fail to improve.
Read the passage, then answer the question. Heating and cooling make up the largest share of energy use in a typical American home, often close to half of the utility bill. Because so much money is involved, small changes in how a household manages indoor temperature can add up over a year. One of the simplest changes is setting the thermostat back while the household is asleep or away. A house that is allowed to cool by several degrees on a winter night loses heat more slowly than a house kept warm, because heat escapes faster when the gap between indoor and outdoor temperatures is larger. The furnace has to work to warm the rooms again in the morning, but that recovery uses less energy than was saved overnight. Programmable and smart thermostats make the habit easier to keep. Instead of remembering to turn the dial, a homeowner sets a schedule once, and the device lowers and raises the temperature on its own. Some models also report how many hours the system ran each day, which helps a household see whether its schedule is paying off. Which statement is the main idea of the first paragraph but NOT the main idea of the passage as a whole?
- A.Lowering the temperature at night or when away saves energy, and thermostats help.
- B.A cooler house loses heat more slowly because its indoor-outdoor gap is smaller.
- C.Smart thermostats report how long the system ran so a family can judge its plan.
- D.Since heating and cooling cost so much, small changes in managing them add up.
Show answerHide answer
Correct answer: Since heating and cooling cost so much, small changes in managing them add up.
The first paragraph says heating and cooling are "often close to half of the utility bill," so "small changes... can add up," and it stops there. The statement about setting the temperature back and using thermostats is the main idea of the whole passage, which is exactly what the question rules out. The statements about heat loss and run-time reports are details from the second and third paragraphs.
Read the passage, then answer the question. Zebra mussels, small striped shellfish native to the region around the Black and Caspian Seas, were found in the Great Lakes in the late 1980s. Scientists believe they arrived in the ballast water that cargo ships take on in one port and release in another. Within a few years they had reached all five of the Great Lakes. Once established, the mussels spread quickly. A single female can release hundreds of thousands of eggs in a year, and the young drift on currents before attaching to any hard surface. Adults also cling to boat hulls and engines, which lets them reach lakes that no current connects. Dense colonies grow inside the intake pipes of power plants and city water systems, and keeping those pipes clear costs operators large sums every year. The mussels also change the lakes themselves. Each one filters plankton from the water, and together they can make a lake noticeably clearer. Clear water may look healthy, but the plankton the mussels remove is food for young fish and native shellfish, which can decline as a result. In some lakes, the clearer water also lets sunlight reach deeper, so weeds grow on bottoms where they could not grow before. Some water plants coat their pipes or use chemical treatments to keep colonies from forming, but these steps protect only the pipes. No method has been found that removes zebra mussels from an entire lake once they are established. For that reason, most states focus on prevention, asking boaters to clean, drain, and dry their boats before moving them from one body of water to another. Which choice best summarizes the second paragraph?
- A.Zebra mussels multiply and spread fast, and their colonies are costly to clear.
- B.Zebra mussels release huge numbers of eggs, and their young drift on currents.
- C.Zebra mussels spread mainly on boats, so boaters must clean and dry each hull.
- D.Zebra mussels clear the lake water but remove plankton that young fish need to eat.
Show answerHide answer
Correct answer: Zebra mussels multiply and spread fast, and their colonies are costly to clear.
The second paragraph opens, "Once established, the mussels spread quickly," gives the ways they spread, and ends with colonies in intake pipes that cost operators "large sums every year." The egg-and-drift option is accurate but covers only the paragraph's first example. Boats are one route among several, and the boater rule is from the fourth paragraph; the plankton point is the third paragraph's.
Read the passage, then answer the question. An apprentice who has a concern about job assignments, training, or treatment on the job should first raise it with the immediate supervisor, either in person or in writing. Many problems can be settled quickly in that first conversation, and the supervisor should respond within two working days and keep a brief note of the conversation and its outcome. Concerns involving harassment or an immediate safety hazard may instead go straight to the training director. If the concern is not resolved within five working days, the apprentice may submit a written complaint to the training director. The director will review it, may meet with the people involved, and will give a written response within ten working days that explains the reasons for the decision. Either party may then ask the full apprenticeship committee to review the decision. Written complaints and the responses to them are kept in a separate confidential file. They are not placed in the apprentice's performance record, and only the training director and the committee may read them. An apprentice may ask to see the file on their own complaint at any time. These steps exist so that every concern receives a fair hearing on the record, not to discourage anyone from speaking up. No apprentice will be penalized for using this process in good faith, and supervisors are expected to treat a complaint as a normal part of the program; a supervisor who discourages an apprentice from using it may be subject to review. Only a complaint the apprentice knows to be false may lead to discipline. What is the main purpose of the fourth paragraph?
- A.To warn apprentices that a knowingly false complaint may bring discipline
- B.To assure apprentices that honest use of the process carries no penalty
- C.To assure apprentices that complaints stay out of their performance file
- D.To explain that the full committee may review the director's decision
Show answerHide answer
Correct answer: To assure apprentices that honest use of the process carries no penalty
The fourth paragraph says the steps exist "not to discourage anyone from speaking up" and that "no apprentice will be penalized for using this process in good faith." The false-complaint sentence is a single limit on that promise, not the paragraph's purpose. Keeping complaints out of the performance record is the third paragraph's point, and committee review comes from the second.
Read the passage, then answer the question. For much of American history, wetlands were seen as wasted land. Marshes and swamps bred mosquitoes, blocked roads, and could not be plowed, so millions of acres were drained and filled to make room for farms and towns. By the 1980s, the lower 48 states had lost more than half of the wetlands they once had, and in a few farm states the loss was close to nine-tenths. Scientists now recognize that much of that wasted land was doing useful work. During heavy rain, a wetland holds water like a sponge and lets it go slowly, which lowers flood peaks downstream. As water creeps through dense plants, sediment settles out, and plants and microbes take up excess nutrients, so the water leaving a wetland is often cleaner than the water that entered it. That cleaning has limits, however: a marsh that receives more fertilizer runoff than its plants can use passes much of the surplus along. Wetlands also shelter wildlife, often in greater variety than the dry land around them. Migrating birds stop at them to rest and feed. Many kinds of ducks, frogs, and fish depend on them for at least part of their lives, and a large share of the nation's threatened and endangered species use wetland habitat. For these reasons, many communities now protect the wetlands that remain and, in some places, restore ones that were drained. Restoration is slow, though, and a rebuilt marsh may take decades to support the variety of life found in one that was never disturbed. Planners therefore treat restoration as a last resort and prefer keeping existing wetlands intact. What is the main idea of the second paragraph?
- A.Wetlands let sediment settle out as water creeps slowly through their thick plant cover.
- B.Wetlands can clean water well only when the runoff that reaches them is not too heavy.
- C.Wetlands once thought useless slow floodwater and clean the water that passes through.
- D.Wetlands deserve protection because they do useful work for both people and wildlife.
Show answerHide answer
Correct answer: Wetlands once thought useless slow floodwater and clean the water that passes through.
The paragraph opens by saying the "wasted land was doing useful work" and then explains two kinds of work: lowering flood peaks and cleaning the water. The limit on cleaning is a qualification added at the end, not the paragraph's main point. Protection for people and wildlife sums up the whole passage, and sediment settling is one supporting detail.
Read the passage, then answer the question. Spare household batteries last longest when they are kept in a cool, dry place, either in their original packaging or in a case that keeps them apart. Extreme heat shortens their shelf life, and damp conditions can corrode the metal ends. Some people store batteries in the refrigerator, but for most modern batteries this gains little, and the moisture that collects when they are taken out can do more harm than the cold does good. Loose batteries tossed together in a junk drawer are a different matter. If the two ends of a battery touch a coin, a key, or another battery, current can flow where it was never meant to, and the battery can grow hot. Nine-volt batteries, whose two ends sit side by side, are especially likely to cause this kind of trouble. A strip of tape over the ends, or a slot of its own for each battery, keeps that current from flowing. The same risk follows batteries after they are used. Rechargeable lithium-ion batteries, found in phones, tools, and toys, still hold some energy when they are thrown away. Crushed or punctured in a garbage truck or a sorting machine, they can spark fires, and waste facilities have reported a growing number of such fires. A battery that is swollen, cracked, or hot to the touch should be set on a surface that cannot burn, away from anything that can. Rules for disposal vary by type and by place. Many communities allow ordinary single-use alkaline batteries to go out with household trash, but they ask residents to cover the ends of rechargeable batteries with tape and bring them to a drop-off site. Which statement would the author most likely agree with?
- A.Nine-volt batteries are the type most often blamed for the fires at waste sites.
- B.Batteries of every type should be kept out of the household trash once used.
- C.Stored batteries keep their charge longest when they are kept refrigerated.
- D.One simple step makes batteries safer in a drawer and when thrown away.
Show answerHide answer
Correct answer: One simple step makes batteries safer in a drawer and when thrown away.
The second paragraph says "a strip of tape over the ends" keeps stray current from flowing in a drawer, and the last paragraph asks residents to "cover the ends of rechargeable batteries with tape" before drop-off, so the same step serves both cases. The every-type claim ignores that many communities allow alkaline batteries in household trash. Nine-volt batteries are singled out for drawers, while the waste-site fires are tied to lithium-ion batteries, and the refrigerator is said to gain little.
Read the passage, then answer the question. The first 1,000 hours of on-the-job training make up a probationary period. During this time, the apprenticeship committee watches closely to see whether the new apprentice shows up reliably, follows directions, works safely, and keeps up with classes. The period gives both sides a chance to decide whether the trade is a good fit before either has invested several years. Apprentices are paid at the first-year rate throughout probation. Reviews are held at 500 hours and again at 1,000 hours, and the apprentice receives written feedback after each one. The feedback names specific strengths and problems rather than giving a single overall grade. An apprentice who receives a poor review at 500 hours is told what must improve before the next one. If the second review is also poor, the committee may either end the apprenticeship or extend probation by up to 500 hours, but it may extend probation only once. A probationary apprentice may be dropped by the committee without the hearing that is required later on. That does not mean an apprentice can be dropped for no reason at all: the committee must still state its reason in writing, and dismissals based on race, sex, religion, or national origin are prohibited at every stage. An apprentice who believes a dismissal broke these rules may file a complaint with the state apprenticeship agency. An apprentice who completes probation in good standing becomes a full participant, with the right to a hearing before any dismissal and the right to appeal committee decisions. Hours worked during probation, including any extension, count fully toward the total needed to graduate. Which title best fits this section of the handbook?
- A.What the First 1,000 Hours Mean for a New Apprentice
- B.How the Committee Reviews and Extends a Probation Period
- C.Why New Apprentices Can Be Dropped Without Any Reason
- D.The Hearing and Appeal Rights Owed to Every Apprentice
Show answerHide answer
Correct answer: What the First 1,000 Hours Mean for a New Apprentice
The section explains what the first 1,000 hours are for, how they are reviewed and possibly extended, what limits apply to dropping a probationer, and what changes once probation ends, so the 1,000-hours title covers it all. The review-and-extension title fits only the second paragraph. The third paragraph says the committee "must still state its reason in writing," which rules out dropping without any reason, and probationers lack "the hearing that is required later on," so hearing rights are not owed to every apprentice.
Read the passage, then answer the question. Many people who used cordless tools in the 1990s remember a rule: run the battery all the way down before recharging it. The nickel-cadmium batteries in those tools could seem to lose capacity if they were repeatedly recharged before being fully drained, an effect often called battery memory, and owners were told that a full drain every time kept the batteries healthy. Batteries were expensive, and a pack that seemed to fade after a year was a common complaint. The lithium-ion batteries in today's phones and laptops do not behave this way. They show no meaningful memory effect, and running them down to empty again and again actually adds wear. For everyday use, topping up whenever it is convenient is fine, and many makers say partial charges are gentler on the battery than full cycles. Some phones even include a setting that holds the charge below full to reduce wear. Some devices do suggest letting the battery run low once in a while. The reason is not the battery's health but its fuel gauge: the software that estimates the remaining charge can drift over time, and an occasional full cycle helps it relearn where empty and full are. Without it, a phone may shut off while still showing a few percent left. Some advice has carried over for good reason; keeping any battery out of extreme heat still helps it last. But the rule about draining a battery completely every time belongs to devices that most people no longer own. Old habits linger, though, and the full-drain advice is still repeated online and in stores. Which title best fits the passage?
- A.Why Draining a Battery Fully Still Helps It Last
- B.Why an Old Battery Charging Rule Fits So Few Devices Today
- C.How the Memory Effect Weakened Older Battery Packs
- D.How Partial Charging Keeps a Phone Battery Healthy
Show answerHide answer
Correct answer: Why an Old Battery Charging Rule Fits So Few Devices Today
The passage explains the old drain-it-fully rule and then says it "belongs to devices that most people no longer own." The occasional full cycle in the third paragraph is for the fuel gauge, "not the battery's health," so the title saying draining still helps a battery last misreads that exception. The memory effect is only the first paragraph's background, and partial charging is a single point from the second.
Read the passage, then answer the question. This agreement covers all equipment rented from Hartline Tool Rental. Equipment may be rented for four hours, one day, or one week, and is due back by 5:00 p.m. on the last day of the rental period. Equipment returned late is charged one additional day at the regular rate for each day or part of a day it is late. Customers who need a tool longer should call before 5:00 p.m. on the due date, and the rental will be extended at the regular rate with no late charge. Equipment must be returned in the condition in which it left the store, apart from normal wear. Normal wear includes dull blades, light scratches, and dust from ordinary use. Equipment returned caked with concrete, mud, or paint is charged a cleaning fee of 25 dollars. Damage caused by misuse, such as cutting materials the tool is not designed for, is charged to the customer at the cost of repair. Customers may buy a damage waiver for 12 percent of the rental charge. The waiver covers accidental damage, such as a saw dropped from a tailgate, but it does not cover loss, theft, misuse, or cleaning. Customers who decline the waiver accept full responsibility for any accidental damage to the equipment while it is in their care. A deposit is held on the customer's credit card at checkout. It is released within three business days after the equipment is returned, minus any of the charges described above. Customers who dispute a charge may ask for a written review within 30 days, and the store will not report a disputed amount as unpaid while the review is open. Which statement best expresses the central idea of the passage?
- A.The agreement explains how customers can extend a rental and so avoid late charges.
- B.The agreement explains how the deposit is held and when it goes back to customers.
- C.The agreement explains the charges, beyond the rental fee, that customers can owe.
- D.The agreement explains how buying the damage waiver protects customers from extra charges.
Show answerHide answer
Correct answer: The agreement explains the charges, beyond the rental fee, that customers can owe.
Each paragraph sets out a different added cost: late charges, a cleaning fee, repair costs for misuse, the waiver, and deductions from the deposit, so the agreement as a whole explains what customers can owe beyond the rental. The waiver option overstates its reach, since it "does not cover loss, theft, misuse, or cleaning." Extending a rental and the deposit are each true details from a single paragraph.
Read the passage, then answer the question. Anyone who has seen a phone shut off on a cold morning with its display showing 30 percent charge has met one of the ways temperature changes how a battery behaves. A battery makes electricity through chemical reactions, and those reactions slow down in the cold. The battery cannot deliver power as fast, the device reads the drop in voltage as an empty battery, and it shuts down. Older devices are especially prone to this, because their worn batteries already struggle to supply power. For the most part this loss is temporary. Once the battery warms up, its full capacity returns. The exception is charging. Charging a lithium-ion battery while it is below freezing can coat part of the inside with metal, and that damage is permanent. For that reason many chargers for power tools and electric cars will not charge a battery until it has warmed. Heat has nearly the opposite pattern. A warm battery can briefly deliver power more easily than a cool one, so it may seem to perform well on a hot day. But heat also speeds up unwanted side reactions inside the battery, and these slowly wear it out. Unlike most effects of cold, the damage from heat does not reverse when the battery cools, which is why a phone left in hot cars for several summers holds less charge than it once did. Battery makers therefore advise keeping batteries out of direct sun and hot vehicles, and storing them partly charged in a cool, dry place when they will not be used for a while. Which statement best expresses the main idea of the passage?
- A.Heat and cold both wear a battery out for good, though heat does it more quickly.
- B.Heat and cold both cut a battery's output, but only the cold's effect is lasting.
- C.Heat and cold matter little to a battery that is kept charged in a cool, dry place.
- D.Heat and cold affect a battery differently, and the harm done by heat is more lasting.
Show answerHide answer
Correct answer: Heat and cold affect a battery differently, and the harm done by heat is more lasting.
Cold slows the chemistry so that "for the most part this loss is temporary," while heat speeds side reactions whose damage "does not reverse when the battery cools," so the two affect a battery differently and heat's harm lasts longer. The claim that both wear a battery out for good ignores that cold's effect is mostly temporary, with charging below freezing as the only exception. The claim that only cold's effect lasts reverses the passage, and heat does not cut output, since a warm battery "can briefly deliver power more easily." The passage never says heat and cold matter little; the storage advice exists because they matter.
Read the passage, then answer the question. Every first-year apprentice must report to the first jobsite with the hand tools on the required tool list, including pliers, screwdrivers, a tape measure, and a tool pouch. These tools belong to the apprentice, who is expected to keep them in working order. Tools that break or wear out through normal use are the apprentice's responsibility to replace. Contractors supply power tools, ladders, testing instruments, and specialty tools, along with the personal protective equipment the job requires. Apprentices sign for these items when they are issued. An apprentice is charged for a contractor's tool only if it was damaged through misuse or was not returned; ordinary wear and breakage are the contractor's cost. Lost or damaged contractor tools must be reported to the foreman the same day. Contractors are not required to replace an apprentice's personal tools that are lost or stolen from a jobsite. There is one exception. When a contractor provides a locked gang box for overnight storage and personal tools are stolen from it, the contractor will replace them, provided the theft is reported to the foreman by the start of the next shift, with a list of the missing tools. Tools left in a vehicle or an unlocked area are not covered. Apprentices are encouraged to engrave or paint-mark their tools, keep a list of what they own, and add tools gradually as they advance, since the required list grows in the second and third years and replacing a full set at once is costly. The training office can supply a printed tool list for each year on request. Which sentence best summarizes this section of the handbook?
- A.Apprentices must replace their own tools, with one narrow exception for theft.
- B.Apprentices replace their own tools in all cases, while contractors replace theirs.
- C.Apprentices pay for any contractor's tool that breaks while it is signed out to them.
- D.Apprentices may claim tools that are stolen from the site if the theft is reported.
Show answerHide answer
Correct answer: Apprentices must replace their own tools, with one narrow exception for theft.
The first and third paragraphs make personal tools the apprentice's responsibility, with one stated exception: tools stolen from a contractor's locked gang box and reported "by the start of the next shift." Saying apprentices replace their own tools "in all cases" ignores that exception. Saying any stolen tool can be claimed if reported overstates it, because tools left in a vehicle or unlocked area "are not covered," and apprentices pay for contractor tools only after misuse or loss.
Read the passage, then answer the question. Most small contractors estimate a job before it starts, but far fewer go back afterward to compare that estimate with what the job actually cost. Without that comparison, an estimate that runs low can be repeated on bid after bid, and the company may not notice until a slow season exposes how thin its margins have become. Some owners say they are too busy to track actual costs, since it means saving every receipt and having workers log their hours by task. The effort is real, and on a small crew it can take several hours a week. But the review does not need to cover every job. Checking one job in five, plus every job of a type the company rarely does, is usually enough to show where estimates go wrong. Other owners object for a different reason: they worry that crews will feel watched and will pad their time logs or rush to look efficient. Owners who have tried reviews say the answer is to explain the purpose at the start. When workers learn that the numbers are used to correct the estimate, not to grade the crew, most log their hours honestly, and some point out problems the owner had missed. When Hartley Floors began reviewing finished jobs this way, it found that its crews were spending about a third more time than estimated preparing old subfloors. One crew leader had suspected as much for years but had never been asked. The company raised its prep allowance for older homes, and its next several jobs came in close to budget. What is the main purpose of the third paragraph?
- A.To warn that crews tend to pad their logs whenever they feel watched
- B.To answer a second objection by describing how owners can ease it
- C.To explain why reviewing every job takes owners too much time
- D.To show how one crew leader's input helped to fix a company's estimates
Show answerHide answer
Correct answer: To answer a second objection by describing how owners can ease it
The paragraph opens "Other owners object for a different reason" and then gives the answer: "explain the purpose at the start," after which "most log their hours honestly." Padding is only what owners "worry" about, and the paragraph says it mostly does not happen, so the warning overstates it. The time burden belongs to the second paragraph, and the crew leader's input is the fourth paragraph's example.
Read the passage, then answer the question. Beavers build dams for their own protection. They pile sticks, stones, and mud across a stream and patch leaks quickly. The pond that forms behind a dam is deep enough that the entrance to the beavers' lodge sits underwater, out of reach of most predators, and it gives the animals a place to store branches for winter food. The dams do much more than shelter beavers. They slow the stream, trap sediment, and raise the water level in the surrounding soil, which helps keep nearby meadows green during dry spells. The same habits can cause trouble near people. A dam may flood a road or plug a culvert overnight. Trapping and removing the animals often gives only short relief, because a site that suited one family of beavers is likely to draw another. Some towns now install pipes called flow devices through the dams instead. The pipes keep the pond from rising past a set level, so the beavers stay and the road stays dry. Beavers react to the sound and feel of moving water by piling material on the spot, so the pipe's intake is set far out in the pond, where the flow into it is slow and quiet. Not everyone welcomes the approach. Some landowners still prefer removal, pointing out that the devices need occasional cleaning. The devices also suit gentle streams best. Towns that use them report that while a device costs more to put in than a single round of trapping, it often costs less over time than years of repeated trapping. Each of the following accurately restates a point made in the passage EXCEPT:
- A.Removing one beaver family often brings short relief, since another may move in.
- B.Beavers tend to pile material at places where they hear and feel moving water.
- C.Towns report that flow devices cost less to install than one round of trapping.
- D.Flow devices tend to be better suited to gentle streams than to fast-moving ones.
Show answerHide answer
Correct answer: Towns report that flow devices cost less to install than one round of trapping.
The last paragraph says a device "costs more to put in than a single round of trapping" and is cheaper only "over time," so the claim that flow devices cost less to install than one round of trapping misstates the passage. The other three are accurate paraphrases: short relief because another family moves in, piling material at moving water, and devices suiting gentle streams best. A reader who remembers only that towns found the devices cheaper will accept the install-cost statement without noticing the up-front versus over-time distinction.
Read the passage, then answer the question. Summit Equipment Rental requires a deposit to reserve any large machine, such as an excavator or a lift. The deposit equals one day's rent and is applied to the final bill when the customer picks up the machine. Reservations may be made up to 30 days ahead. Smaller tools, such as saws and plate compactors, are rented first come, first served and need no deposit. Plans on job sites change, so the company allows cancellations. A customer who cancels at least 48 hours before the scheduled pickup receives a full refund of the deposit. A customer who cancels with less notice, or who does not arrive at all, forfeits the deposit, because the machine was held back from other renters. A customer who simply wants a different date is treated as cancelling and booking again, so the same 48-hour rule applies. Weather is treated differently. If the National Weather Service issues a warning for the county on the day of pickup, the customer may call before the scheduled pickup time and move the reservation to another date within 30 days without losing the deposit. The warning must cover the county where the job site is located, not just somewhere in the region. This option may be used only once for each reservation; a second weather delay is handled as an ordinary cancellation. Finally, the company accepts responsibility for its own failures. If a reserved machine is not ready on the pickup date because of a breakdown or a scheduling error, the customer may take a similar machine at the same rate or receive the full deposit back, whichever the customer prefers. Which sentence best summarizes the passage?
- A.A deposit holds a machine, and it is returned to anyone who cancels 48 hours ahead.
- B.A deposit holds a machine, and bad weather lets renters move the date more than once.
- C.A deposit holds a machine, and it is lost whenever a renter misses the pickup date.
- D.A deposit holds a machine, and what happens to it depends on why plans change.
Show answerHide answer
Correct answer: A deposit holds a machine, and what happens to it depends on why plans change.
The passage gives different outcomes for different causes: late notice from the customer forfeits the deposit, a weather warning allows one free move, and the company's own breakdown or error brings a full refund or a substitute machine. The 48-hour refund is true but covers only the second paragraph. The weather option may be used "only once," and the deposit is not lost "whenever" pickup is missed, since a weather warning or a company failure protects it.
Read the passage, then answer the question. When people buy a new appliance, the cashier often offers a service plan. For an up-front fee, the plan promises to pay for repairs for a set number of years, usually starting after the manufacturer's warranty runs out. Similar plans are sold for phones, televisions, and even cars. Consumer advocates urge shoppers to read the terms before paying. Some plans duplicate coverage the buyer already has, either through the manufacturer's warranty or through a credit card that lengthens the warranty on items bought with it. Others exclude the very parts most likely to fail, or require the owner to pay a fee for each service visit. A few even require the owner to ship the item to a repair center at the owner's expense. Price matters as well. A plan that costs a large share of the appliance's value may cost more than a likely repair would. Stores earn a large share of their profit on these plans, which suggests that, on average, buyers pay more for them than the plans pay out. Shoppers who set aside the same amount in savings can often cover a repair themselves, and they keep the money if nothing breaks. That does not make every plan a bad deal. A plan may make sense for an item whose repairs are both common and costly, or for a buyer who could not handle a large bill all at once. The point is to treat the offer as a purchase of its own, compared and judged on its details, rather than as a box to tick at the register. Which statement best expresses the central idea of the passage as a whole?
- A.A service plan can be worth buying or not, so its details need a close look.
- B.Service plans pay out less than buyers spend, so saving the money is the wiser path.
- C.Service plans suit mainly buyers who could not cover a large repair bill.
- D.Service plans often repeat coverage that buyers already get from elsewhere.
Show answerHide answer
Correct answer: A service plan can be worth buying or not, so its details need a close look.
The last paragraph states the passage's point: "That does not make every plan a bad deal," and the offer should be "judged on its details." The saving option takes the third paragraph's argument as final even though the fourth limits it. Buyers who cannot cover a large bill are only one of two cases named, and duplicate coverage is one detail from the second paragraph.
Read the passage, then answer the question. It surprises many new owners to learn that a business can be profitable and still run out of money. Profit measures whether income exceeds costs over a period of time. Cash flow measures whether money arrives before the bills it must pay come due, and the two do not always line up. Take a small landscaping company that finishes a $40,000 project for a property manager in March. The property manager pays invoices sixty days after completion, so the money arrives in May. Meanwhile, the nursery that supplied the plants expects payment within thirty days, and the crew must be paid every Friday. On paper the job made money, but in April the company's account may be nearly empty. Owners can narrow the gap in several ways: asking for a deposit before work starts, billing in stages as a large job progresses, negotiating longer payment terms with suppliers, or arranging a line of credit to cover brief shortfalls. What is the main purpose of the first paragraph?
- A.To argue that profit matters less to owners than cash flow does
- B.To state a surprising idea and define the terms it depends on
- C.To list the ways owners can protect their cash on hand
- D.To describe a firm that ran out of money after a large job
Show answerHide answer
Correct answer: To state a surprising idea and define the terms it depends on
The first paragraph states that a profitable business can "still run out of money" and then defines profit and cash flow so the claim makes sense. It never ranks one above the other; it says only that the two "do not always line up." The landscaping example is in the second paragraph, and that company's account is "nearly empty," not out of money.
Read the passage, then answer the question. The idea of a canal across the narrow Isthmus of Panama was centuries old, but the first serious attempt began in 1881 under a French company led by Ferdinand de Lesseps, who had built the Suez Canal. He planned a canal at sea level, cut straight through the hills, as he had done across the flat desert of Egypt. The plan failed. Some of the company's own engineers warned that a sea-level cut through Panama's hills would be far deeper than anything dug at Suez, and they urged a canal with locks instead; de Lesseps refused until the company was nearly out of money. Heavy rains caused repeated landslides into the cut, and the Chagres River flooded the works. Worse, yellow fever and malaria killed thousands of workers. By 1889 the company had gone bankrupt, and the digging largely stopped. The United States took over the project in 1904 and at first debated the same question the French had faced. Officials chose a different answer. Engineers dammed the Chagres to form a large lake well above sea level and built locks to lift ships up to it and lower them on the other side, so ships crossed the high ground on water instead of through a cut to sea level. The lake also supplied the water that filled the locks. Medicine changed as well. Officials drained standing water and screened buildings to control the mosquitoes that spread disease, and deaths fell sharply. Doctors had recently shown that mosquitoes carry yellow fever and malaria, something the French had not known. The canal opened in 1914. Which statement is best supported by the passage as a whole?
- A.The French effort ended when disease left the company unable to hire workers.
- B.The Americans finished the canal using the design the French had chosen.
- C.The American plan meant that ships no longer had to cross at sea level.
- D.De Lesseps had built the Suez Canal through hills much like those in Panama.
Show answerHide answer
Correct answer: The American plan meant that ships no longer had to cross at sea level.
The first paragraph says de Lesseps planned "a canal at sea level," and the third says the Americans built locks to lift ships to a lake "well above sea level," so the American plan meant ships did not cross at sea level. The French company ended because it "had gone bankrupt," not because it could not hire workers, and the Americans used locks, a design the French leader had refused. Suez was cut across "the flat desert of Egypt," not hills.
Read the passage, then answer the question. When New York began digging a canal from the Hudson River to Lake Erie in 1817, critics called it "Clinton's Ditch," after Governor DeWitt Clinton, who had championed it. Digging a 363-mile channel with hand tools, mules, and simple machines looked to many like an impossible task. The federal government had declined to pay for the project, so the state took on the cost itself, and many people expected the money to be wasted. The canal opened in 1825 and quickly proved the critics wrong. Before it, moving a ton of goods overland from Buffalo to New York City by wagon took weeks and cost so much that bulky farm goods were rarely worth shipping. Canal boats cut both the time and the cost to a small fraction of what they had been. Tolls paid off the state's debt within about a decade. Farmers in the Great Lakes region could now ship grain east at a profit, and settlers moved west in large numbers. Towns such as Rochester, Syracuse, and Buffalo grew along its route. New York City, where the canal's traffic reached the sea, grew into the nation's busiest port. Other states rushed to build canals of their own, but many of those projects ran into debt and never matched the Erie's success. The canal's dominance did not last forever. By the second half of the century, railroads, which could run year-round and reach places without water, were carrying more and more of the freight. The canal was enlarged several times and stayed in use, but it no longer set the pattern of the nation's trade. Which sentence best summarizes the passage?
- A.A state-funded canal once mocked as folly was soon copied and outdone by other states.
- B.A state-funded canal once mocked as folly kept its freight lead long after railroads.
- C.A federally funded canal mocked as folly made New York City the nation's busiest port.
- D.A state-funded canal once mocked as folly reshaped trade before railroads took the lead.
Show answerHide answer
Correct answer: A state-funded canal once mocked as folly reshaped trade before railroads took the lead.
The passage traces the canal from mockery to success (cheaper shipping, westward settlement, New York's rise as a port) and then to decline as railroads "were carrying more and more of the freight." Other states' canals "never matched the Erie's success," so they did not outdo it. The canal stayed in use but "no longer set the pattern" of trade, and the federal government "declined to pay" for it.
Read the passage, then answer the question. A thunderstorm usually begins when the sun heats the ground and the air just above it. The warm air rises, and as it cools with height, its water vapor condenses into the droplets that form a cumulus cloud. Condensation releases heat, which keeps the rising air warmer than its surroundings, so it keeps climbing and the cloud grows taller. On a summer afternoon a cloud that began as a small puff can tower several miles high within an hour. In the upper part of the cloud, droplets and ice grow until they are too heavy for the rising air to hold up. As they fall, they drag air down with them, and a downdraft forms beside the updraft. Collisions among ice crystals and soft hail in this busy region separate electric charge, and lightning is most frequent while both drafts are strong. Some of the rain evaporates as it falls through drier air below the cloud. Evaporation chills that air, making it denser than the air around it, so it sinks faster and the downdraft grows. When it reaches the ground, it spreads out as the cool gust that people often feel just before heavy rain arrives. Forecasters say a storm has reached its mature stage once rain from the downdraft reaches the ground, and both drafts are strongest during this stage. Over time, the downdraft spreads and cuts the storm off from the warm air feeding it, and the cloud slowly rains itself out. Many storms pass through all three stages in under an hour, although clusters of storms can last much longer. Which statement is best supported by the passage?
- A.A storm's lightning is most frequent once its rain has begun reaching the ground
- B.A storm's downdraft begins when evaporating rain chills the dry air below the cloud
- C.A storm's updraft weakens because condensation releases heat into rising air
- D.A storm's cool gust is usually felt only after its heaviest rain has begun
Show answerHide answer
Correct answer: A storm's lightning is most frequent once its rain has begun reaching the ground
Lightning is "most frequent while both drafts are strong," and the last paragraph says both drafts are strongest in the mature stage, which begins "once rain from the downdraft reaches the ground"; together these support the lightning statement. The downdraft begins when falling drops "drag air down," and evaporation only makes it grow, so evaporating rain does not start it. Condensation heat keeps the updraft climbing rather than weakening it, and the gust comes "just before heavy rain."
Read the passage, then answer the question. For much of the early twentieth century, labor unions pushed for shorter working hours. Many factory employees worked ten hours a day, six days a week, and the campaign for an eight-hour day had been going on since the 1800s. Some unions won shorter hours through contracts, but millions of workers were not covered by any union agreement. The Fair Labor Standards Act, passed by Congress in 1938, set national rules for many workers in businesses involved in trade between states. It established a minimum wage of 25 cents an hour and limited most work by children. It also required employers to pay time and a half for hours beyond a set weekly limit. The law took effect in October 1938, and the limit was phased in. During the law's first year, overtime pay began after 44 hours a week. The limit dropped to 42 hours in the second year and reached 40 hours in the third, where it has remained. Farmworkers and several other groups were left out of the law at first. A covered worker put in 9 hours a day Monday through Friday and 3 hours on Saturday during one week in February 1940. How many of those hours earned overtime pay?
- A.3 hours
- B.6 hours
- C.4 hours
- D.8 hours
Show answerHide answer
Correct answer: 6 hours
The worker logged 9 x 5 + 3 = 48 hours, and February 1940 falls in the law's second year (October 1939 to October 1940), when the limit was 42 hours, so 48 - 42 = 6 hours earned overtime. Using the first-year limit of 44 gives 4 hours, using the final 40-hour limit gives 8, and forgetting the Saturday hours gives 45 - 42 = 3.
Read the passage, then answer the question. All visitors to the Riverside Tower site must sign in at the gate trailer and watch a 12-minute safety video before going past the fence. Each visitor is issued a hard hat, safety glasses, and a high-visibility vest, and must wear closed-toe boots of his or her own; anyone arriving in sneakers is turned away. Visitors stay with an escort from the general contractor at all times. Delivery drivers are handled differently. A driver who stays with the truck inside the marked unloading zone does not sign in, watch the video, or need an escort. Whenever the driver steps out of the cab, however, the driver must wear a high-visibility vest and closed-toe boots. A hard hat is added only while the tower crane is lifting a load over the unloading zone, and safety glasses only while the driver is cutting banding or straps. A driver who leaves the zone for any reason, even to find a restroom, is treated as a visitor from that point on and follows every visitor rule until the truck pulls out of the gate. Drivers who expect to need the restroom are asked to say so at the gate, so that an escort can be arranged in advance. Visits are allowed only between 7:00 a.m. and 3:30 p.m. While the tower crane is operating, no visitor may go above the fourth floor. The escort, not the visitor, decides where the visitor may walk, and escorts carry radios so that the crane operator can warn them before a lift begins over any area where visitors are standing. A driver walks out of the unloading zone to a restroom, comes back to the truck, and then cuts the straps on a load while the crane sits idle. What does the passage require?
- A.Vest, boots, and glasses, with no escort needed
- B.Vest, boots, and hard hat, with an escort present
- C.Vest, boots, glasses, and hard hat, with an escort
- D.Vest and boots only, with no escort needed at all
Show answerHide answer
Correct answer: Vest, boots, glasses, and hard hat, with an escort
Once the driver leaves the zone, the driver "is treated as a visitor from that point on and follows every visitor rule until the truck pulls out," and visitors wear a hard hat, safety glasses, a vest, and their own boots and stay with an escort at all times. Vest, boots, and glasses with no escort is the driver rule for cutting straps, which no longer applies after the restroom trip. The idle crane matters only under the driver rules, so it does not remove the visitor's hard hat.
Read the passage, then answer the question. When the town of Millbrook opened its municipal power plant in 1897, the plant ran only from dusk until midnight. Its single steam engine powered 140 streetlights and about 300 lamps in homes and stores, and nearly every customer used electricity only for lighting. With no meters yet installed, customers paid a flat monthly charge for each lamp. Service changed in stages. In 1902, merchants on Main Street petitioned for both all-night and daytime service. The town council approved only all-night running, judging that daytime sales would be too small to pay a second crew. In 1905 the plant superintendent argued that a second boiler, which he had already asked the council to buy at some earlier date, would make daytime running cheap enough to try. The council approved the boiler but still refused to add daytime hours until a customer could be found whose purchases would cover the second crew's wages. That customer appeared in 1906, when the Hollis Woolen Mill signed a ten-year contract to buy power for its looms from eight in the morning until six at night. Daytime service began that spring, and a second shift of plant workers was hired to run it. The new boiler, delayed by a strike at the foundry, was not installed until the following year. Some accounts of the town's history credit electric irons, which were used mostly during the day, for the change. Irons did not become common in Millbrook, however, until after 1910. By 1915 the plant served more than 1,200 customers, and the council had begun debating whether to sell power to the neighboring village of Eastford. The passage supports each of the following statements EXCEPT:
- A.All-night service began before the mill signed its power contract
- B.Daytime service began before the second boiler was put into use
- C.Electric irons were not yet common when daytime service started
- D.The boiler was first requested after the merchants' 1902 petition
Show answerHide answer
Correct answer: The boiler was first requested after the merchants' 1902 petition
The passage says only that the superintendent had "already asked the council to buy" the boiler "at some earlier date," so it never shows the request came after the 1902 petition; that statement is unsupported. Daytime service starting before the boiler is odd but supported, since the boiler "was not installed until the following year." All-night running was approved in 1902, before the 1906 mill contract, and irons were not common "until after 1910," after daytime service began in 1906.
Read the passage, then answer the question. Workers may exchange damaged personal protective equipment at the tool crib during any shift. The worker must bring the damaged item along with an exchange slip signed by his or her foreman. If the slip is missing, the attendant may issue a replacement only after reaching the foreman by phone, except for fall-protection harnesses, which are never issued without a signed slip. The attendant first checks that the item described on the slip matches the item being returned. Next, the attendant attaches a red DO NOT ISSUE tag to the damaged item so that it cannot be handed out again by mistake. Respirators and harnesses carry serial numbers, and for those two items only, the attendant then records the serial number of the damaged item in the exchange log; other gear is recorded only by type and count at the end of the shift. The attendant then hands over the replacement and files the slip. Before leaving the crib with a new respirator, the worker performs a seal check while the attendant watches. A worker who cannot get a seal must try a different size. No seal check is needed for hard hats, gloves, or eyewear, which the worker simply looks over. Workers who cannot come to the crib may send a coworker with the item and the slip, and the coworker signs the log in his or her place. A coworker may not pick up a harness for someone else. Do not throw damaged gear away yourself, even if it seems worthless, because the crib tracks returns to spot items that fail too often. A worker brings a cracked hard hat and a signed exchange slip to the tool crib. What does the attendant do just before handing over the replacement hard hat?
- A.Attaches a red DO NOT ISSUE tag to the damaged hard hat
- B.Records the damaged hard hat's serial number in the exchange log
- C.Checks that the slip describes the same hard hat being returned
- D.Calls the foreman by phone to confirm the exchange is approved
Show answerHide answer
Correct answer: Attaches a red DO NOT ISSUE tag to the damaged hard hat
The order is: check the slip against the item, tag the damaged item, record the serial number "for those two items only" (respirators and harnesses), then hand over the replacement. A hard hat skips the serial-number step, so tagging comes just before the handoff. Recording the serial number is the tempting choice because it is the step right before the handoff for a respirator, and the phone call is needed only when the slip is missing.
Read the passage, then answer the question. Before any worker at the Dunmore Packaging plant clears a jam or adjusts a machine, the machine must be locked out. The handbook describes the six steps by what each one depends on rather than in a numbered list. Supervisors say this is deliberate: a worker who has to think about why each step must wait for another is less likely to skip one. The final step is a test: the worker presses the start button to confirm that nothing moves, then returns the controls to the off position. That test may not begin until any energy still stored in the machine, such as a raised part that could fall or pressure left in an air line, has been released or blocked. The worker's personal lock and signed tag go on the main disconnect, but only after that disconnect has been opened to cut the machine off from its power source. Releasing stored energy must wait until the lock and tag are in place. Opening the disconnect comes after the machine has been stopped with its normal controls, and stopping it comes after everyone who operates or works near the machine has been told of the shutdown. When several workers service the same machine, each attaches a personal lock to a shared clasp. A worker who joins after the machine has already been locked out skips the notice, shutdown, disconnect, and stored-energy steps, attaches a lock and signed tag to the clasp, and then performs the start-button test personally. For a worker who locks out a machine alone, which step is the fourth one performed?
- A.Releasing or blocking the energy still stored in the machine
- B.Hanging the personal lock and signed tag on the disconnect
- C.Opening the main disconnect to cut off the power source
- D.Stopping the machine with its own normal operating controls
Show answerHide answer
Correct answer: Hanging the personal lock and signed tag on the disconnect
Working backward from the clues gives the order: tell everyone, stop the machine with its controls, open the disconnect, hang the lock and signed tag, release stored energy, then run the start-button test. That makes hanging the lock and tag the fourth step. Opening the disconnect is tempting because it is the fourth step mentioned when the clues are read straight through, but the lock "only after that disconnect has been opened" places it third, and releasing stored energy "must wait until the lock and tag are in place," so it is fifth.
Read the passage, then answer the question. At Harlow Paving, the lightning procedure begins the moment anyone on a crew hears thunder, even faint thunder. That person calls a stop-work warning over the radio, and the foreman sounds three long blasts on the truck horn so that workers wearing hearing protection are also alerted. Workers then have one minute to secure anything that could blow loose, such as cones, tarps, and hand tools. Anything not secured in that minute is left where it is. Everyone then moves to the designated shelter: the site trailer or a hard-topped vehicle with the windows rolled up. Open-sided sheds, tents, and machine cabs without a closed roof do not count as shelter. The foreman's head count, radioed to the dispatch office, marks the start of the waiting period, but it is not taken until the foreman has walked past every vehicle in use as shelter to confirm its windows are fully closed. Dispatch logs the time of the most recent thunder and keeps that log for the shift. Work may resume only after 30 minutes have passed without any thunder. If thunder is heard during the wait, the 30-minute count starts over from that moment. Which step comes directly after the workers reach the designated shelter?
- A.The foreman counts the workers and then radios that total in to dispatch
- B.Dispatch logs the time of the most recent thunder for the shift
- C.The foreman checks each sheltering vehicle for fully closed windows
- D.Workers take one minute to secure cones, tarps, and hand tools
Show answerHide answer
Correct answer: The foreman checks each sheltering vehicle for fully closed windows
The head count "is not taken until the foreman has walked past every vehicle in use as shelter to confirm its windows are fully closed," so the window check comes first once everyone is in shelter. The head count is tempting because the paragraph mentions it first, and securing loose items happens before anyone moves to shelter.
Read the passage, then answer the question. To all field crews: We have had three injuries this quarter that were reported days late, and late reports make it hard to fix the hazard that caused them. Please follow these steps for every injury, however minor, and for every near miss. Speed matters, but so does order: each step below depends on the one before it. The first priority is care. Stop work and get first aid or medical help for the injured person before anything else. Once the person is cared for, make the area safe so no one else is hurt, for example by roping off a spill or a damaged scaffold. Do not clean up or move anything beyond what safety requires, because the safety office needs to see the scene as it was. Notify your crew lead before the end of the shift. If the injured person needed more than first aid, such as an ambulance or a trip to a clinic, do not wait for the end of the shift: phone the crew lead as soon as the area has been made safe. The crew lead then photographs the scene and fills out the incident form, which must reach the safety office within 24 hours. Only after the safety office has reviewed the photos may the area be cleaned up and work resume there. Near misses follow the same steps, except that first aid is not needed and the form may be filed within 48 hours. A near miss reported promptly often reveals a hazard before it hurts anyone, so please do not treat these as optional. A worker is badly hurt by a damaged scaffold, and an ambulance has just taken him to the hospital. According to the memo, what should happen next?
- A.The crew lead photographs the scene and starts the incident form
- B.The scaffold is left in place so that the safety office can see it
- C.The crew lead is phoned right away and told about the injury
- D.The area is roped off so that no one else can be hurt there
Show answerHide answer
Correct answer: The area is roped off so that no one else can be hurt there
Once the person is cared for, the memo says to "make the area safe," and even for serious injuries the crew lead is phoned "as soon as the area has been made safe," so roping off the area comes first. Phoning the crew lead is tempting because the exception says not to wait, but it still follows making the area safe. Photos come after the crew lead is notified, and leaving the scaffold in place is a rule to follow, not the next step.
Read the passage, then answer the question. Pine Hollow Day Camp stops all outdoor activities whenever the camp's lightning detector reports a strike within eight miles or a staff member hears thunder, whichever happens first. Counselors blow two short whistle blasts, and campers walk, not run, to the dining hall or to their assigned cabins. The detector sits on the office roof and sounds an alarm only inside the office, so counselors depend on the whistle signal to spread the word across camp. Activities that are already indoors, such as games in the gymnasium or crafts in the art room, may continue during a stop, with one kind of exception: anything that uses water lines. Swimming lessons in the indoor pool end at once, the bathhouse showers close, and kitchen groups stop washing dishes, because metal plumbing can carry current from a nearby strike. The open-sided pavilion and the lodge's screened porch have roofs but no solid walls, so both are treated as outdoors. Campers who are in the bathhouse when a stop is called dress and go straight to their cabins instead of finishing their showers. Canoe and hiking groups away from the main camp carry radios. When a stop is called, they head for the nearest building, even if they have not heard thunder themselves. The stop ends only after 30 minutes have passed with no detector report inside eight miles and no thunder heard. Staff call a report inside that distance, or any rumble of thunder, a close signal, and each new close signal starts the 30 minutes over. Reports from farther away are logged by the office but do not affect the count, because storms at that distance are tracked, not treated as a threat. Which of these groups is following the camp's lightning rules?
- A.An archery group out 40 minutes past the last close signal, with a strike since at 12 miles
- B.A swim group finishing its lesson in the indoor pool, which has solid walls and a roof
- C.A card group staying at its tables on the lodge porch, which has a solid roof overhead
- D.A canoe group staying out on the lake, since none of its campers has heard any thunder
Show answerHide answer
Correct answer: An archery group out 40 minutes past the last close signal, with a strike since at 12 miles
Reports from beyond eight miles "do not affect the count," so archers back outside 40 minutes after the last close signal are within the rules even with a 12-mile strike since then. The indoor pool group must stop because swimming lessons "end at once," and the screened porch is "treated as outdoors" despite its roof. The canoe group must head for a building "even if they have not heard thunder themselves."
Read the passage, then answer the question. Before removing a mower blade, disconnect the spark plug wire and tip the mower so that the air filter faces up, which keeps oil and fuel from leaking into it. Wedge a block of wood between the blade and the deck so the blade cannot turn, then loosen the bolt. Before the blade comes off, mark its underside with paint so that it can be put back facing the same way. Wear heavy gloves for every step that follows, since even a dull blade can cut. Clamp the blade in a vise and file each cutting edge at its original angle, pushing the file away from the edge. Give both ends the same number of strokes. If the filing leaves a thin rough lip of metal, called a burr, along the back of an edge, remove it with a few light strokes on the flat side; if no burr forms, go straight to the balance check. For the balance check, first wipe the filings off with a rag, since even a little metal dust can throw the reading off, and then hang the blade by its center hole on a nail. An unbalanced blade shakes the mower and wears out its bearings. If one end dips, put the blade back in the vise and file a little metal from the back of the low end, never from its cutting edge. Wipe it and hang it again, repeating until it hangs level. Once it hangs level, bolt the blade back on with the painted side toward the ground, remove the wood block, set the mower upright, and reconnect the spark plug wire last. Tighten the bolt firmly; a loose blade can shift on its shaft and throw the balance off again. A blade formed no burr, but one end dipped on its first balance check. If the instructions were followed, which statement about the order of steps must be true?
- A.The flat side got light strokes before the blade was first wiped with a rag
- B.The blade was wiped with a rag between its first and second times on the nail
- C.The wood block was removed before the blade was bolted on with paint facing down
- D.The spark plug wire was reconnected before the mower was set upright again
Show answerHide answer
Correct answer: The blade was wiped with a rag between its first and second times on the nail
After a dip, the third paragraph says to file the low end and then "Wipe it and hang it again," so the blade was wiped between its first and second times on the nail. The flat-side strokes are only for a burr, and this blade formed none. The last paragraph bolts the blade on before removing the block and reconnects the plug wire "last," after the mower is upright, so the other two orders are reversed.
Read the passage, then answer the question. Keller & Sons requires every crew to inspect a ladder before each use, checking for cracked rails, loose rungs, and worn feet. A damaged ladder is tagged "Do Not Use" and taken out of service the same day, even if the damage seems minor. Ladders with a missing safety label are also removed from service until a new label is fitted. An extension ladder must be set at the proper angle: for every four feet of height from the ground to the point where the ladder rests against the building, the base must sit one foot out from the wall. A ladder used to reach a roof must also extend at least three feet above the roof edge it rests on, so that a worker has something to hold while stepping on or off. That extension is not counted in the height used to set the angle; crews measure only to the resting point. Workers keep three points of contact while climbing, and they carry tools in a belt or raise them with a hand line. Stepladders must be fully opened with the spreaders locked, and a stepladder may not be leaned against a wall and climbed like a straight ladder. Workers may not stand on the top cap of a stepladder or on the step just below it. Near overhead power lines, only fiberglass ladders may be used, since aluminum and other metals conduct electricity. Supervisors are asked to stop any setup that breaks these rules, even for a task that will take only a minute. A setup that was correct in the morning should be checked again if the ladder is moved. Which extension ladder setup follows every Keller & Sons rule?
- A.Fiberglass, near power lines, on a 16-foot edge, base 4¾ feet out, top 3½ feet above
- B.Aluminum, near power lines, on a 12-foot edge, base 3 feet out, top 3½ feet above
- C.Aluminum, far from power lines, on a 16-foot edge, base 4 feet out, top 3 feet above
- D.Fiberglass, near power lines, on a 12-foot edge, base 3 feet out, top 2½ feet above
Show answerHide answer
Correct answer: Aluminum, far from power lines, on a 16-foot edge, base 4 feet out, top 3 feet above
A 16-foot resting point needs a base 16 ÷ 4 = 4 feet out, the top must reach at least 3 feet above the edge, and an aluminum ladder is allowed when it is not near power lines, so the aluminum setup on the 16-foot edge passes. A base of 4¾ feet comes from wrongly adding the 3-foot extension (19 ÷ 4), which the passage says "is not counted." The aluminum ladder near power lines breaks the fiberglass rule, and a top only 2½ feet above the edge is too short.
Read the passage, then answer the question. The Tri-County Electrical Joint Apprenticeship Committee accepts some applicants who already have training as "advanced-standing" apprentices. These apprentices skip part of the first year and start at a higher step on the wage scale. The committee reviews requests for advanced standing twice a year, in March and in September, and an applicant may request it only once. Credit for on-the-job work is given only for hours recorded in a registered apprenticeship program. It does not matter whether that program was registered with the U.S. Department of Labor or with a state apprenticeship agency that the Department recognizes. Hours worked as a helper for a contractor that did not sponsor a registered program are not counted, however many there are, although the applicant may describe that work on the general application. Classroom work is handled separately: a transcript showing related instruction can earn classroom credit even from a school that had no apprenticeship program. The committee credits on-the-job hours only in full blocks of 1,000, so an applicant with 2,600 qualifying hours receives credit for 2,000, and an applicant needs at least one full block to receive any. Hours earned more than five years before the request are not counted, with one exception: if the applicant served on active military duty after earning the hours, the five-year limit is extended by the length of that service. Every request must include work records signed by the sponsor of the earlier program. Letters from former coworkers or instructors may be attached as supporting material, but they cannot take the place of the sponsor's records. Which applicant qualifies for at least one block of on-the-job credit?
- A.Has 1,700 registered-program hours from three years ago, backed by letters from two coworkers
- B.Has 2,400 hours as a contractor's helper from last year, backed by the contractor's own records
- C.Has 1,900 registered-program hours from seven years ago, no military duty, backed by the sponsor's records
- D.Has 1,300 registered-program hours from six years ago, then two years of military duty, sponsor's records
Show answerHide answer
Correct answer: Has 1,300 registered-program hours from six years ago, then two years of military duty, sponsor's records
The third paragraph counts hours older than five years when the applicant later served on active duty, extending the limit by the length of service, so six-year-old hours followed by two years of duty fall inside a seven-year limit, and 1,300 hours make one full block of registered-program work with the sponsor's records. The seven-year-old hours with no military service fall outside the limit, the coworker letters "cannot take the place of the sponsor's records," and helper hours for a nonsponsoring contractor are "not counted, however many there are."
Read the passage, then answer the question. Volunteers in the Valley Rain Watch network read their rain gauges at the same time every morning, ideally 7 a.m., so that each report covers a full 24 hours. The standard gauge has a narrow inner tube that holds up to one inch of rain and a wide outer cylinder that catches any overflow. To take a reading, lift out the inner tube and hold it at eye level. Read the scale at the bottom of the curved water surface, not at its edges. If the tube is not full, record that amount, empty the tube, and put the gauge back together. On wet days the inner tube may have overflowed. The overflow is measured with the inner tube itself, so the tube must be empty before the water from the outer cylinder is poured into it, and its full 1.00 inch must be written down before it is emptied. Read the poured water the same way, repeat the process if it also fills the tube, and add all the readings for the day's total. Report the total on the network website before 9 a.m. If snow has fallen, bring the outer cylinder indoors to melt before measuring, and use the inner tube only after the melt is complete. After rain has overflowed into the outer cylinder, in what order should the observer do the first three steps?
- A.Write down 1.00 inch, empty the inner tube, pour in the overflow
- B.Empty the inner tube, write down 1.00 inch, pour in the overflow
- C.Empty the inner tube, pour in the overflow, write down 1.00 inch
- D.Pour in the overflow, write down 1.00 inch, empty out the inner tube
Show answerHide answer
Correct answer: Write down 1.00 inch, empty the inner tube, pour in the overflow
The passage says the full 1.00 inch "must be written down before it is emptied," and the tube "must be empty before the water from the outer cylinder is poured into it." So the observer records 1.00 inch first, empties the tube second, and pours in the overflow third. Any order that empties the tube before recording loses the full inch unrecorded, and pouring the overflow in first mixes it with the water already in the tube.
Read the passage, then answer the question. On the evening of November 9, 1965, a single protective relay at a power station in Ontario switched off one of the transmission lines carrying power toward Toronto. The relay was not broken. It had been set years earlier to trip if the line's load rose above a certain level, but demand had grown since then, and on that cold evening the line's ordinary load came close to the setting. A small rise pushed it over. The power the line had carried shifted onto neighboring lines, which were overloaded in turn and also shut off. Within minutes, generating plants across the region were disconnected, and some thirty million people in Ontario and the northeastern United States lost power, some of them for most of the night. The blackout showed that utilities tied together in a large network could spread a failure as easily as they could share power. In response, the industry formed a council in 1968 to write reliability standards for the connected systems of North America. For decades, however, those standards were voluntary. Only after another major blackout in 2003 did federal law in the United States make such standards mandatory. Standards cannot make blackouts impossible. They can push utilities to review protective settings as loads change and to plan for the loss of any single line. Based on the passage, which statement would the author most likely agree with?
- A.The relay switched off because the line carried an unusually heavy load that night.
- B.The relay's trip setting had not been brought up to date as demand on the line grew.
- C.The 2003 blackout would not have happened if the 1968 standards had been binding.
- D.Mandatory standards, unlike voluntary ones, can rule out blackouts on the 1965 scale.
Show answerHide answer
Correct answer: The relay's trip setting had not been brought up to date as demand on the line grew.
The first paragraph says the relay "had been set years earlier" but "demand had grown since then," and the last paragraph says standards push utilities "to review protective settings as loads change," so the author would agree the setting had not been brought up to date. The load that night was the line's "ordinary load" plus "a small rise," not an unusually heavy one. The passage never says binding standards would have stopped the 2003 blackout, and it states that standards "cannot make blackouts impossible."
Read the passage, then answer the question. Before any welding, cutting, or grinding at the Brookfield Medical Center expansion, the crew must obtain a hot work permit from the site safety office. Each permit is valid for one shift only and must be posted at the work location. A fire watch, a worker whose only job is to look for sparks and smoldering material, must be present during the work and must stay for at least 60 minutes after it ends. When hot work stops and starts again on the same permit, as it often does around a lunch break, this period is counted from the end of the last hot work of the shift, and the fire watch stays through the break. On any day when the sprinkler system in the work area has been shut off, even briefly and even if it has since been turned back on, the period after the work is extended from 60 minutes to three hours. Combustible materials within 35 feet of the work must be moved away. Anything that cannot be moved, such as a wooden wall frame, must be covered with a fire-resistant blanket. Floor openings within the same distance must also be covered so that sparks cannot fall to the level below. The fire watch carries a charged extinguisher and has the authority to stop the work at any time. The person doing the welding may not serve as the fire watch for his or her own work, even on small jobs. If the fire watch must leave for any reason, the work stops until a replacement arrives. The sprinklers in a work area are shut off from 7:00 to 8:00 a.m. for testing and then restored. On one permit, a crew welds there from 10:00 to 11:30 a.m. and grinds from 12:20 to 1:20 p.m. What is the earliest time the fire watch may leave?
- A.2:20 p.m.
- B.2:30 p.m.
- C.4:20 p.m.
- D.5:20 p.m.
Show answerHide answer
Correct answer: 4:20 p.m.
The period is counted "from the end of the last hot work of the shift," which is the grinding that ends at 1:20 p.m., and because the sprinklers were off earlier that day it is "extended from 60 minutes to three hours," giving 4:20 p.m. Choosing 2:20 p.m. applies the normal 60 minutes because the sprinklers were restored, which the passage says does not matter. Choosing 2:30 p.m. counts three hours from the end of the welding, and 5:20 p.m. stacks the 60 minutes on top of the three hours.
Read the passage, then answer the question. To all production staff: Starting March 1, the following attendance rules apply to every shift. If you will miss a scheduled shift, call the supervisor line at least two hours before the shift starts. A text message or a message left with a coworker does not count as notice. Supervisors log each call with the time it was received, and the logged time is what counts. A doctor's note is not required for most absences. You will need one only if you miss three or more scheduled workdays in a row, or if you miss the scheduled workday immediately before or immediately after a paid holiday. Days you are not scheduled to work, such as weekends for most staff, neither count toward a run of missed days nor break one. In those two cases, bring the note to Human Resources within three days of returning to work. Absences without a required note will be recorded as unexcused. Floating holidays, which each employee schedules with a supervisor, are treated as vacation days under this policy. They are not paid holidays for the purpose of the note rule. The paid holidays are New Year's Day, Memorial Day, the Fourth of July, Labor Day, Thanksgiving Day, and Christmas Day. Calling in late is handled separately. Notice given less than two hours before a shift is recorded as a late call, which counts as half an occurrence whether or not the absence is later excused. Five occurrences in a rolling twelve-month period lead to a written warning. Occurrences older than twelve months drop off the record automatically. For an employee scheduled Monday through Friday, which absence requires a doctor's note?
- A.Missing Monday, Wednesday, and Friday of the same work week
- B.Missing the Tuesday two days before Thanksgiving Day
- C.Missing the Monday after a Friday floating holiday
- D.Missing a Thursday, a Friday, and the following Monday
Show answerHide answer
Correct answer: Missing a Thursday, a Friday, and the following Monday
Weekend days "neither count toward a run of missed days nor break one," so Thursday, Friday, and the next Monday are three scheduled workdays in a row and need a note. Monday, Wednesday, and Friday are not in a row because the employee worked Tuesday and Thursday. The Tuesday before Thanksgiving is not the workday "immediately before" the holiday (Wednesday is), and floating holidays "are not paid holidays for the purpose of the note rule."
Read the passage, then answer the question. Cordless tool batteries are expensive and can be dangerous when damaged, so follow this guide before charging any pack. Most packs used on this site are lithium-ion. First, check the temperature. Packs charge safely only between 50 and 100 degrees Fahrenheit. A pack outside that range should sit indoors until it reaches room temperature. Packs may be stored anywhere above 40 degrees, but storage temperature does not make a pack ready to charge. Second, check the pack's history. A pack that fell from waist height or higher onto a hard surface must be inspected for cracks and then set on the bench for 15 minutes before charging, so that any internal damage has time to show itself as heat or swelling. A shorter fall requires only the inspection. If no one saw how a pack fell, treat it as a fall from waist height. A pack that was splashed, such as by rain, may be charged once it has dried for 24 hours. A pack that was submerged in water must never be charged, even after it seems dry. Third, look the pack over. A pack with a crack, a bulge, or a burnt smell is out of service. Damaged and submerged packs go in the marked bin by the tool room door for recycling. Never tape over a crack and return a pack to service. Packs waiting in the bin are kept away from heat and from loose metal scraps. Record each pack placed in the bin on the sheet beside it, with the date and the reason. According to the guide, which battery pack can go on the charger right away?
- A.A half-full pack at 72 degrees, splashed by rain two full days ago, with no damage
- B.A drained pack at 68 degrees, dropped off a ladder onto concrete a minute ago
- C.A half-full pack at 75 degrees, left in a flooded trench last week, now dry
- D.A drained pack at 45 degrees, kept overnight in a truck cab, with no damage
Show answerHide answer
Correct answer: A half-full pack at 72 degrees, splashed by rain two full days ago, with no damage
A splashed pack may be charged "once it has dried for 24 hours," and 72 degrees is inside the 50-to-100 range, so the pack splashed by rain two full days ago can go on the charger right away. The pack dropped off a ladder onto concrete a minute ago must at least be inspected for cracks first, and a fall from waist height or higher also needs a 15-minute wait. The trench pack was submerged and "must never be charged," and 45 degrees is fine for storage but below the 50-degree charging minimum.
Read the passage, then answer the question. Changing the blade on a circular saw takes only a few minutes, but the order of the steps matters. The first step, before anything else, is to unplug the saw. A blade change is never done with the cord attached, even if the trigger has a lock. To loosen the arbor bolt, press and hold the arbor lock button so the shaft cannot turn, then turn the bolt with the wrench stored in the saw's base. On most saws the bolt loosens in the same direction the blade spins, which surprises people who expect it to turn the other way. Before pressing the arbor lock, though, set the saw's cutting depth to its deepest setting, which exposes more of the blade and gives the wrench room to work. With the bolt out, slide the outer washer off the shaft; the inner washer usually stays where it is. You can let go of the arbor lock as soon as the bolt is out, since nothing else needs it until the new bolt is tightened. To lift the old blade clear, pull the lower guard back with your thumb. Before the new blade goes on, wipe the sawdust off both washers, since grit trapped against the blade can make it wobble. Check that the arrow printed on the new blade points the same way as the arrow on the saw's guard. Seat the blade, replace the outer washer and bolt, and tighten the bolt while holding the arbor lock. Release the lock and turn the blade by hand to confirm it spins freely before plugging the saw back in. According to the instructions, which step comes directly before the arbor lock is first pressed?
- A.Unplugging the saw's cord from its outlet
- B.Setting the cutting depth to its deepest
- C.Turning the arbor bolt with the wrench
- D.Sliding the outer washer off the shaft
Show answerHide answer
Correct answer: Setting the cutting depth to its deepest
The second paragraph says, "Before pressing the arbor lock, though, set the saw's cutting depth to its deepest setting," so setting the depth comes directly before the lock is pressed. Unplugging is the very first step, but the depth setting falls between it and the lock, even though the text mentions the lock first. Turning the bolt and sliding off the washer both come after the lock is pressed.
Read the passage, then answer the question. Customers of Clearwater Electric who cannot put panels on their own roof, including renters, can still use solar power by joining the Clearwater Community Solar garden. Members subscribe to a share of a large array built on a former landfill and receive a credit on their monthly bill for the power their share produces. Because the garden is one large array, its panels cost less per watt to install and maintain than panels spread across separate rooftops. Before uploading anything, applicants must confirm that the electric account is in their own name, since credits can be applied only to the account holder's bill. Staff then set the size of the share from the applicant's average yearly use, which they work out from the last twelve months of bills, and a share may cover up to that average but no more. The subscription agreement is mailed only after the share has been sized. An applicant who has held the current account for less than twelve months uploads every bill it has produced, and staff then email a short form asking for the home's floor area and heating type; the share is sized from the answers once the form comes back. There is one way around the form. If the applicant moved from another address that Clearwater also serves, the bills from the earlier account may be added, provided that account was also in the applicant's own name. When the two accounts together cover a full twelve months, staff size the share from the bills alone. Credits begin with the first full billing cycle after the signed agreement is processed, which usually takes one or two months. Members who move within the service area keep their share, and members who leave the area may transfer it to another eligible customer or end it with 60 days' notice. Which applicant's share can be sized from bills alone, with no emailed form?
- A.One whose three-year Clearwater account is in her landlord's name, not her own
- B.One whose eight-month account follows a year on her own out-of-state utility account
- C.One whose five-month account follows seven months in her name at an old Clearwater home
- D.One whose ten-month account follows a year on a roommate's bill at an old Clearwater home
Show answerHide answer
Correct answer: One whose five-month account follows seven months in her name at an old Clearwater home
Bills from an earlier account count only if Clearwater served that address and the account was "also in the applicant's own name," and five months plus seven months covers "a full twelve months," so the applicant whose five-month account follows seven months in her name at an old Clearwater home needs no form. The roommate case fails because that earlier account was not in the applicant's name, and the out-of-state utility is not an address Clearwater serves. The three-year renter has enough bills, but the account is in the landlord's name, so credits cannot be applied and no share is sized at all.
Read the passage, then answer the question. To all production staff: starting on the first of next month, the eye, hearing, and head protection rules at the Dunmore plant will change. The changes follow two near misses this spring and a noise survey that found higher levels than expected near the stamping presses. Please read the whole memo, because the rules differ by area and by what the equipment in that area is doing. Safety glasses remain required everywhere on the production floor, including aisles and break areas inside the yellow lines, and they may be removed only in the office wing and the outdoor storage yard. Earmuffs or earplugs are now required in any yellow zone while at least one press in that zone is running, even if it is idling and making no parts. When every press in a zone is shut down, hearing protection may be removed there. Hard hats are required in the outdoor storage yard only while the overhead crane is operating. Under last year's rule, the crane counted as operating only while its load was moving, and several workers took off their hats whenever the hook stopped. Under this memo, the crane counts as operating whenever its operator is in the cab, even if nothing is moving. When the cab is empty, hard hats may be removed in the yard. Supervisors will begin checking for compliance on the first of next month. A worker who sees a coworker without required equipment should tell the area supervisor rather than confront the coworker directly. Spare glasses, earplugs, and hard hats are kept at each supervisor's desk, and replacements are free. The memo supports each of the following statements EXCEPT:
- A.In the yard, glasses may come off even while the crane's operator sits in the cab
- B.In a yellow zone with one press idling and making no parts, earmuffs must stay on
- C.In the yard, a hard hat may come off once the crane's cab is empty and the hook rests
- D.In a yellow-zone break area, glasses may come off once every press there shuts down
Show answerHide answer
Correct answer: In a yellow-zone break area, glasses may come off once every press there shuts down
The unsupported statement is that glasses may come off in a yellow-zone break area once every press shuts down: glasses are required in "break areas inside the yellow lines" and may be removed "only in the office wing and the outdoor storage yard"; the shutdown exception applies to hearing protection alone. Glasses may come off in the yard even while the crane operates, because the crane rule governs hard hats, not glasses. An idling press still counts as running, and an empty cab ends the hard-hat requirement.
Read the passage, then answer the question. When a water main breaks, pressure in the pipes nearby can drop low enough for groundwater and soil to be drawn into the system. To protect residents, the utility issues a boil-water advisory for the affected area as soon as the break is confirmed. The advisory covers every address on the affected mains, even homes where the water looks and tastes normal, since harmful bacteria cannot be seen or tasted. Crews first repair the main, then flush the repaired section with clean water and add chlorine to disinfect it. Before returning the section to service, they take one sample from it to confirm the chlorine level. Pressure usually returns to normal within hours, and crews also check nearby valves and hydrants for damage. Restoring pressure is not enough to end the advisory, however. Lab workers collect water samples at several points in the affected area, wait at least 24 hours, and collect a second set from the same points. The advisory is lifted only after both sets test free of harmful bacteria. If any sample in either set tests positive, the count starts over: the area is flushed again, and two new sets must be collected and must both test clean. Until the advisory is lifted, residents should boil water for one minute before drinking it, cooking with it, or using it to brush their teeth. The utility announces the end of an advisory by text message and on its website. After it ends, residents are told to run their cold taps for a few minutes and to throw out ice made during the advisory. In which case may the boil-water advisory be lifted?
- A.One set has a positive; after reflushing, two new sets 30 hours apart test clean
- B.Two sets from the same five points, taken 20 hours apart, both test clean
- C.Two sets from five points, the second from different points, both test clean
- D.One set has a positive; a third set from the same points 24 hours later tests clean
Show answerHide answer
Correct answer: One set has a positive; after reflushing, two new sets 30 hours apart test clean
The third paragraph says a positive sample means the area is "flushed again, and two new sets must be collected and must both test clean," with the second set taken "at least 24 hours" after the first, so two new sets 30 hours apart after reflushing allow lifting. A single third set after a positive does not restart the count properly, and sets taken 20 hours apart are too close together. The second set must come "from the same points."
Read the passage, then answer the question. At the end of every shift, the person who used the shop's portable air compressor is responsible for putting it away. Water vapor in compressed air condenses inside the tank, and water left there rusts the tank from the inside, so the tank is drained every day it is used. A rusted tank can weaken without any sign on the outside, which is why the shop treats this routine as a safety rule rather than as care of the tool. First, switch the compressor off and unplug it. Next, disconnect the air hose from any tool, and only then disconnect it from the compressor. Never open the drain valve while the tank is full of pressure. Instead, pull the ring on the safety valve and hold it until the gauge reads below 10 psi. This also tests the safety valve, so if no air escapes when the ring is pulled, tag the compressor and report it rather than draining it. Then open the drain valve under the tank slowly, tilting the tank toward the valve, and let it run until only air comes out. Close the valve, coil the hose without kinks, and hang it on its hook. The one exception is Friday. Because the shop is closed on weekends, the last user on Friday leaves the drain valve open after the water has run out, so that the inside of the tank can dry, and attaches a note to the handle saying the valve is open. The first user on Monday closes it and removes the note before switching the compressor on. If the shop will be open on a Saturday, the Friday user follows the normal routine instead. Each user below tilted the tank and opened the drain slowly. Which one followed the shop's routine?
- A.On a Monday, got no air from the safety valve's ring, then drained the tank
- B.On a Friday before a Saturday shift, drained it and closed the valve
- C.On a Friday before a Saturday shift, drained it and left the valve open
- D.On a Tuesday, got air at the ring until 12 psi, and then drained the tank
Show answerHide answer
Correct answer: On a Friday before a Saturday shift, drained it and closed the valve
The Friday exception exists "because the shop is closed on weekends," and "if the shop will be open on a Saturday, the Friday user follows the normal routine," which ends "Close the valve"; so the Friday user before a Saturday shift who closed the valve followed the routine. Leaving the valve open is the move a reader who remembers only "Friday means open" picks. The tank must read "below 10 psi," not 12, and a ring that releases no air means the compressor is tagged and reported, not drained.
Read the passage, then answer the question. In the towns of medieval Europe, most skilled trades were controlled by guilds, associations of craftsmen who set prices, quality standards, and the rules for training newcomers. A boy who wanted to learn a trade was bound to a master by a written agreement, often for seven years in England. He usually lived in the master's household, received food, lodging, and instruction, and was paid little or nothing. Guilds also helped members who fell ill and paid for funerals, so belonging to one offered security as well as a trade. Guild rules were local. A guild governed its trade in a single town, so the length of an apprenticeship, the fees, and the test for mastery could all differ from one town to the next, even within the same craft. When the term ended, the apprentice became a journeyman, free to work for wages for any master who would hire him. Many journeymen traveled from town to town for several years, learning methods that differed from place to place. The word journeyman comes from the French journée, meaning a day's work or a day's pay, since journeymen were often paid by the day. To become a master and open his own shop, a journeyman in many guilds had to produce a masterpiece, a finished piece of work judged by the guild's masters. Some guilds also required a fee, and as time went on, some made it easier for masters' sons to qualify than for outsiders. A master could then take on apprentices of his own, although many guilds limited how many a single shop could train at one time. Which statement about medieval guild training is NOT supported by the passage?
- A.A masterpiece alone did not always earn a journeyman the right to a shop
- B.The length of an apprenticeship could differ from one town to the next
- C.Most journeymen kept working for the same master who had trained them
- D.A journeyman was free to work for wages in more than one town's shops
Show answerHide answer
Correct answer: Most journeymen kept working for the same master who had trained them
The passage says a journeyman was "free to work for wages for any master who would hire him" and that many "traveled from town to town," so nothing supports the claim that most stayed with the master who trained them. The masterpiece statement is supported because "some guilds also required a fee," so the masterpiece was not always enough. The local-rules paragraph supports the point about differing apprenticeship lengths.
Read the passage, then answer the question. At every Harlow Construction site, trench work follows the same set of rules. Any trench five feet deep or deeper must have a protective system, such as shoring or a trench box, before anyone steps inside. A shallower trench may go without one only if the site's competent person has examined the soil and judged it stable. The competent person inspects each trench at the start of every shift. A second inspection is required during the shift whenever conditions change: after a rainstorm, after nearby heavy equipment begins operating, or after any sign of cracking along the walls. Until that inspection is finished, workers wait outside the trench. Excavated soil, called spoil, must be piled at least two feet back from the trench edge so that it cannot slide in. For any trench four feet deep or deeper, a ladder or ramp must be placed so that no worker has to travel more than 25 feet sideways to reach a way out. A three-foot-deep trench with no shoring was judged stable at the start of the shift. A rainstorm has just passed. According to the passage, what must happen before workers go back in?
- A.The spoil pile must be moved at least four feet from the edge
- B.A trench box must be set in place because rain loosens soil
- C.A ladder must be placed within 25 feet of every worker
- D.The competent person must inspect the trench a second time
Show answerHide answer
Correct answer: The competent person must inspect the trench a second time
The passage says a second inspection is required "after a rainstorm" and that "until that inspection is finished, workers wait outside the trench," so the competent person must inspect the trench a second time. The ladder rule applies only to trenches "four feet deep or deeper," so it does not cover a three-foot trench. A trench box is required at five feet, and the spoil distance is two feet, not four.
Read the passage, then answer the question. White vinegar is a cheap way to remove rust from hand tools. Its mild acid dissolves rust over several hours, and a tool can be left to soak overnight in a covered plastic tub. Light surface rust, the orange film that wipes off on a finger, usually needs only a scrub with steel wool and a little oil rather than a soak. Some tools need care before they go in. Wooden handles soak up the liquid, swell, and later crack, so remove a wooden handle first or soak only the metal end, keeping the wood above the liquid. Handles of fiberglass or plastic that cannot be removed may go into the vinegar with the tool. Tools with etched or stamped scales, such as squares and rules, can lose their markings if the acid works into them, so the guide limits these to a one-hour soak. Chrome-plated tools are the main exception. Vinegar does not harm intact chrome, but it attacks the steel beneath wherever rust has broken through the plating, and the plating keeps peeling back from the edge of the break for as long as the tool stays in the acid. For that reason the guide says never to soak a chrome-plated tool with any break in its plating, however small the damaged spot may be. Check a soaking tool every few hours and take it out within a day, because vinegar keeps attacking bare steel after the rust is gone. After soaking, scrub the tool, rinse it, dry it completely, and coat it with a thin film of oil the same day. Never mix vinegar with bleach or other household cleaners, which can release harmful fumes. The shop guide would allow each of the following soaks EXCEPT:
- A.A chrome wrench rusted through its plating in one spot smaller than a pea
- B.A rusty hammer head soaked overnight with its wooden handle kept above the liquid
- C.A rusty square with a stamped scale soaked for no more than a single hour
- D.A rusty chisel soaked overnight with its fiberglass handle glued fast to it
Show answerHide answer
Correct answer: A chrome wrench rusted through its plating in one spot smaller than a pea
The guide says "never to soak a chrome-plated tool with any break in its plating, however small," because the plating keeps peeling back from the break, so the wrench with a pea-sized break may not be soaked. A wooden handle may stay on if the wood is kept "above the liquid," a stamped square is allowed a "one-hour soak," and a fiberglass handle that cannot be removed "may go into the vinegar with the tool."
Read the passage, then answer the question. Before anyone services a machine at the Halvorsen plant, an authorized worker locks it out. That worker tells everyone who uses the machine, shuts it down with its normal controls, opens the main disconnect, and releases or blocks any stored energy, such as a raised part or a compressed spring. The worker then attaches a personal lock and tag, presses the start button to confirm that nothing moves, and returns the controls to off. When several people work on the same machine, each one attaches a personal lock to a shared clasp, and the machine cannot be restarted until the last lock is removed. A worker who joins after the machine has already been locked out does not repeat the notice, shutdown, disconnect, or stored-energy steps, since the locks already in place hold that work in effect. That worker attaches a lock and tag to the clasp and then performs the start-button test personally before touching the machine. Each worker removes only his or her own lock. If a lock's owner has left the site without removing it, the supervisor alone may remove it, and only after confirming that the owner is gone and trying to reach the owner by phone. The owner must be told before returning to work. Before the last lock comes off, the worker removing it checks that tools are cleared away and that everyone is standing clear, then tells all users of the machine that it is about to restart. Any worker who is unsure whether a step applies should stop and ask the supervisor before going on. Ana joins a repair after two coworkers have locked out a machine. Raj, one of the coworkers, later leaves the site with his lock still on the clasp. Which statement must be true?
- A.Ana may remove Raj's lock once she confirms that he has left the site
- B.Ana may not remove Raj's lock, even after confirming he has left the site
- C.The supervisor may remove Raj's lock without first trying to reach him by phone
- D.The machine may restart as soon as Ana's own lock and tag are removed
Show answerHide answer
Correct answer: Ana may not remove Raj's lock, even after confirming he has left the site
The third paragraph says that when an owner leaves without removing a lock, "the supervisor alone may remove it," so Ana may not remove Raj's lock even after confirming he has gone. The supervisor must also try "to reach the owner by phone" first, so removing it without trying is not allowed. The machine cannot restart "until the last lock is removed," and Raj's lock is still on the clasp.
Read the passage, then answer the question. Many of the largest copper mines operating today work ore that holds well under one percent copper. To make such rock pay, companies dig enormous open pits, haul the rock in trucks that carry hundreds of tons per load, and crush it in mills that run day and night. Because the pit walls are cut so steep, crews watch them closely, and a section that begins to slump, sagging and sliding toward the pit floor, can halt digging for weeks. It was not always so. A century ago, copper miners in the American West followed narrow veins of rich ore deep underground. Some of that rock held several percent copper by weight, and each ton hauled out in rail carts paid well. Most of those rich veins are long gone. Modern low-grade mining pays only at very large scale, and it is sensitive to the market. Energy is one of its largest costs, since the trucks burn great amounts of diesel fuel and the mills draw great amounts of electricity. When the price of copper stays low for a long stretch, some low-grade mines cut their output or close until prices recover. A short dip seldom has that effect, because shutting a mine down and starting it up again is itself costly. Some copper ores also hold small amounts of gold or molybdenum, recovered in the same mill and sold separately, and that income can carry a mine through a slump that closes a neighbor working ore of about the same grade. Ore grade also tends to fall as a pit deepens, which is why mining companies keep exploring even while their current pits are busy. As it is used in the third paragraph, the word "slump" most nearly means
- A.a gradual decline in the copper content of ore
- B.a sliding collapse of part of the steep pit wall
- C.a long period of low prices for copper metal
- D.a costly shutdown followed by a costly restart
Show answerHide answer
Correct answer: a long period of low prices for copper metal
In the third paragraph the slump closes a neighbor "working ore of about the same grade," and the paragraph is about mines that close "when the price of copper stays low for a long stretch," so the slump is a stretch of low prices. The pit-wall meaning is how the word is used in the first paragraph, not the third, and a drop in ore grade cannot be what closes one mine but not a neighbor with the same grade.
Read the passage, then answer the question. To reduce wait times, Eastgate Family Clinic is updating its appointment policy, effective March 1. Patients who arrive more than 15 minutes after their scheduled time will be asked to reschedule, unless a provider has an opening later that same day. These visits are recorded as late arrivals, not as no-shows. Patients who arrive late but within 15 minutes will be seen, though their visit may be shortened. Patients who expect to be late should call ahead so staff can tell them whether to come in or reschedule. A missed appointment without at least 24 hours' notice will be recorded as a no-show. After three no-shows within any 12-month period, a patient will be able to book only same-day appointments, which are offered each morning on a first-come basis. Patients may return to advance booking after six months without a further no-show. Canceling with 24 hours' notice or more never counts against a patient. We understand that emergencies happen. A patient may call the front desk within one week of a missed visit to explain it, and staff may remove the no-show from the record at their discretion. Calls made after the one-week window will not be considered. A no-show that has been removed is not counted toward the limit of three. Same-day appointments fill quickly, especially on Mondays. Patients who need a visit for a new or worsening problem should call as soon as the phone lines open at 7:30 a.m. Patients who need a prescription refill only may request it through the patient portal and do not need an appointment. Marcus missed visits without notice in January, April, and September of this year. Two days after the April miss, he called to explain it, and staff removed it from his record. In November he arrived 20 minutes late, and no provider had an opening that day. Based on the notice, what is true of Marcus now?
- A.He may book only same-day visits, since he has had three no-shows this year
- B.He may book visits days ahead again, but only after six months without a no-show
- C.He may book only same-day visits, since his late arrival counts as a third no-show
- D.He may still book visits days ahead, since his record holds only two no-shows
Show answerHide answer
Correct answer: He may still book visits days ahead, since his record holds only two no-shows
Marcus missed three visits, but staff removed the April one, and "a no-show that has been removed is not counted toward the limit of three"; his November visit was more than 15 minutes late, and such visits "are recorded as late arrivals, not as no-shows." So his record holds only two no-shows, and he may still book visits days ahead. Counting all three misses ignores the removal, counting the late arrival ignores the late-arrival rule, and the six-month wait applies only after a patient has actually reached three no-shows.
Read the passage, then answer the question. The Lakeside Apprentice Training Center follows the Lakeside School District on weather closings for daytime classes. If district schools close or open late because of snow or ice, daytime classes at the center are canceled for that day. Daytime students do not receive a separate alert, since the district's announcements on local radio and television serve as their notice. Evening classes are decided separately, because road conditions often change during the day and many evening students drive in from farther away. On any day with poor weather, the center's director will make a decision by 2:00 p.m., post it on the center's website, and send a text alert to enrolled students. If no decision is posted by 2:00 p.m., evening classes will meet as scheduled. Text alerts go only to the phone number on file with the student office. Students can check or change their number at the student office or through the student portal. Those who change numbers should update the office right away, because the center cannot resend an alert that went to an old number. Canceled sessions will be made up on the next available Saturday, usually from 8:00 a.m. to noon. Students who cannot attend a makeup session should contact their instructor within one week to arrange an alternative assignment. Instructors will post notes from any canceled session online the same week. Weekend skills labs follow their own schedule and are run by a separate coordinator. Any change to a lab is announced by email the evening before, and labs are never canceled because of a weekday school closing. On a snowy Tuesday, district schools open two hours late. Marco, an evening student, switched to a new phone number last month but has not told the student office. By 3:00 p.m. he has received no text alert. What can he reasonably conclude?
- A.He cannot tell from the missing text whether his class will meet
- B.His class will meet, since no text alert reached him by 2:00 p.m.
- C.His class is canceled, since district schools opened late that day
- D.His class is off, since the alert must have gone to his old phone
Show answerHide answer
Correct answer: He cannot tell from the missing text whether his class will meet
The rule that classes meet "if no decision is posted by 2:00 p.m." depends on a decision not being posted, but alerts "go only to the phone number on file," and Marco's file still has his old number, so his empty phone proves nothing either way. The class-will-meet option treats "no text reached him" as "no decision was posted." The late school opening governs daytime classes only, and nothing shows an alert was actually sent to the old number.
Read the passage, then answer the question. Near-misses involving forklifts had been rising for months at the Kessler Supply warehouse. A near-miss is any event in which a forklift nearly strikes a person, a rack, or another vehicle. The warehouse runs two shifts, a day shift and a night shift, and both use the same aisles, the same trucks, and roughly the same number of drivers. In March the warehouse made two changes. Shift leads on both shifts began holding ten-minute huddles at the start of every shift to cover blocked aisles, heavy deliveries, and any trouble from the shift before. In the same month, a contractor replaced the old lights in the rear aisles. The rear aisles sit under a row of skylights, so during the day they are bright enough without electric light; the complaints about poor visibility there had come almost entirely from night-shift drivers. From April through June, recorded near-misses fell by about forty percent compared with the same months a year earlier. At a staff meeting, the shift leads credited the huddles, and the facilities manager credited the new lights. Each side pointed to examples that seemed to support its view. The shift leads noted that drivers now mention blocked aisles before starting their routes, and the facilities manager noted that the complaints about the rear aisles had stopped. The safety committee has asked for a breakdown of the records by shift and by location before it decides whether to extend the huddles to the loading dock crews. Members have also cautioned that the records depend partly on how willing drivers are to report a near-miss, so a drop in reported events may overstate the drop in actual ones. Which finding, if true, would most weaken the facilities manager's view of the drop?
- A.Near-misses on the night shift fell more sharply than on the day shift
- B.Near-misses on the day shift fell as sharply as on the night shift
- C.Near-misses in the rear aisles fell more sharply than in the front aisles
- D.Near-misses that remain now happen mostly in the front receiving area
Show answerHide answer
Correct answer: Near-misses on the day shift fell as sharply as on the night shift
The second paragraph says the rear aisles are lit by skylights during the day and that visibility complaints came "almost entirely from night-shift drivers," so new lights could only help at night, while the huddles are held on both shifts. An equal drop on the day shift therefore points away from the lights; the rear-aisle option is tempting because it names the place the lights were installed, but a bigger drop there would support the manager's view rather than weaken it.
Read the passage, then answer the question. Around 1900, electric cars were a common sight in American cities. They ran quietly, gave off no exhaust smell, and started at the turn of a switch. Gasoline cars of the time had to be started with a hand crank at the front of the engine, a tiring job that could break a wrist if the engine kicked back. Many buyers, especially those who drove only around town, considered the electric car the more pleasant machine. Some makers advertised electric cars as clean and easy to manage for any driver. Electric cars had drawbacks too. Their batteries were heavy and expensive, a charge lasted only a few dozen miles, and outside the cities there were few places to recharge. For a driver who stayed close to home, though, these limits mattered little. Two developments in the 1910s tipped the balance. In 1912 an electric self-starter appeared on gasoline cars, letting drivers start the engine by pressing a button instead of turning a crank. Gasoline engines remained noisier and smellier than electric motors, but the hardest and most dangerous part of owning one was gone. Meanwhile, mass production on assembly lines drove the price of gasoline cars far below that of electric models, which were still built in small numbers. As roads improved, Americans began driving longer distances between towns, a use for which the electric car had never been well suited. Sales of electric cars dwindled, and by the 1930s they had nearly disappeared from American roads. Electric delivery trucks, which made short runs within a city, held on somewhat longer. According to the passage, how did the self-starter affect the market for electric cars?
- A.It took away their easiest selling point, and it made them costlier than gas cars
- B.It took away their quiet ride, since gas engines no longer needed loud cranking
- C.It took away their easiest selling point, though they stayed quieter than gas cars
- D.It took away their chief buyers, the drivers who made the long trips between towns
Show answerHide answer
Correct answer: It took away their easiest selling point, though they stayed quieter than gas cars
Electric cars "started at the turn of a switch" while gasoline cars needed a dangerous crank; the self-starter let gas drivers press a button, so "the hardest and most dangerous part of owning one was gone," yet gasoline engines "remained noisier and smellier." So it took away their easiest selling point, though they stayed quieter than gas cars. The price gap came from assembly lines, not the starter, and long-distance drivers were never the electric car's buyers, since it "had never been well suited" to that use.
Read the passage, then answer the question. Before the late 1800s, most American towns kept their own local time, setting their clocks so that noon fell when the sun stood highest overhead. Because the sun reaches that point later the farther west one goes, a town a short distance west of its neighbor kept a time several minutes behind. For people who seldom traveled far, this caused few problems. For railroads, it was a constant headache. Each railroad set its own time, often based on the city where it had its headquarters, and a station served by several lines might post several different clocks. Railroads already used the telegraph to send orders to trains on shared track, but timetables keyed to different times made scheduling on that track risky. Some observatories had begun selling time signals by telegraph, mostly to nearby cities, jewelers, and single railroads. Each service sent its own local time, so the signals made individual clocks more accurate without ending the patchwork of different times. In November 1883, the railroads adopted a system of standard time zones, each one hour apart and each hundreds of miles wide. Within a zone, every station now kept exactly the same time, so one precise signal sent over the wires could set clocks across the whole zone to agree within seconds. Most towns soon adopted the railroad zones for everyday life as well, although Congress did not make the zones official law until 1918. Not everyone welcomed the change. Some newspapers complained that the railroads had taken the sun's place, and a few cities held out for years before giving up their local time. Based on the passage, which statement must be true?
- A.Before the zones arrived, telegraph time signals had brought nearby towns' clocks into agreement
- B.After the zones arrived, towns kept their own local time until Congress acted in 1918
- C.Before the zones arrived, railroads had no use for the telegraph in running their trains
- D.After the zones arrived, many towns' clocks no longer read noon when the sun was highest
Show answerHide answer
Correct answer: After the zones arrived, many towns' clocks no longer read noon when the sun was highest
Local time put noon "when the sun stood highest," and the sun reaches that point later farther west; once every place across a zone hundreds of miles wide kept "exactly the same time," towns east or west of the zone's reference point could no longer have clock noon match the sun. The time-signal option fails because each service sent its own local time, "without ending the patchwork." Towns did not wait for 1918 (most "soon adopted" the zones), and railroads already used the telegraph to send orders before 1883.
Read the passage, then answer the question. Sound level is measured in decibels, a scale that does not work like an ordinary ruler. Each increase of 3 decibels roughly doubles the sound energy reaching the ear. A machine that reads 88 decibels is therefore delivering about twice the energy of one that reads 85, even though the numbers look close. The ear does not judge loudness the same way: most listeners say a sound seems twice as loud only when it rises by about 10 decibels, which is one reason workers often underrate the danger of a small increase. Many hearing conservation programs build their exposure limits on this fact. A widely used guideline allows a worker eight hours a day at 85 decibels. For every 3 decibels above that level, the allowed time is cut in half, because the ear is taking in twice the energy each minute. Few workers spend a whole shift at one level, so the guideline treats the day as a single allowance to be shared. Each period at a given level uses up a fraction of the allowance equal to the time actually spent there divided by the time allowed at that level. The fractions for the whole day are added together, and the total must not go above one full allowance. Time spent below 85 decibels is not counted. Earplugs and earmuffs lower the level that actually reaches the ear, but only when they fit well and are worn for the whole exposure. Taking protection off for even a short time in a very loud area can use up much of a day's allowance. A worker whose day would go past the full allowance must either wear protection or be moved to quieter work for part of the shift. Applying the guideline, an unprotected worker spends 1 hour beside a saw measuring 91 decibels. About how much longer could that worker then spend that day beside a sander measuring 88 decibels?
- A.About 2 hours
- B.About 1 hour
- C.About 3 hours
- D.About 4 hours
Show answerHide answer
Correct answer: About 2 hours
At 91 decibels the allowed time is 8 hours halved twice, or 2 hours, so 1 hour there uses half the allowance; at 88 decibels the allowed time is 4 hours, and the remaining half allowance equals 2 hours. Three hours comes from subtracting the hour already spent from the 4-hour limit instead of using fractions, 1 hour from subtracting it from the 2-hour limit, and 4 hours from ignoring the saw time entirely.
Read the passage, then answer the question. In the early years of the telephone, every call passed through a human operator. A caller lifted the receiver, told the operator which person or business to reach, and the operator completed the call by plugging cords into a switchboard. Almon Strowger, an undertaker in Kansas City in the late 1880s, came to believe that an operator was sending callers who asked for an undertaker to a competitor. According to a story often repeated, the operator was married to a rival undertaker. Whether or not his suspicion was correct, it led him to design a switch that let callers connect themselves. Pressing buttons, and later turning a dial, sent a series of electrical pulses that moved the switch to the right line. He received a patent for the idea in 1891. Automatic switching spread slowly at first. Telephone companies had invested heavily in operator switchboards, and many customers were used to asking a person for help. Over the following decades, however, companies found that automatic exchanges let them handle far more calls without hiring more operators, and dial service gradually became the standard in most places. Based on the passage, Strowger's complaint would have been fully answered by any system that
- A.let a telephone company handle more calls without more operators
- B.took the choice of line away from every person handling the call
- C.connected each call faster than an operator at a busy switchboard
- D.let callers name the business they wanted instead of its number
Show answerHide answer
Correct answer: took the choice of line away from every person handling the call
Strowger's grievance was that an operator was "sending callers who asked for an undertaker to a competitor," so any system that took the choice of line away from every person handling the call would answer it. Handling more calls without more operators is a benefit the passage gives for companies, but a system with fewer operators could still let one of them misdirect a call. Speed was never his complaint, and naming the business to a person is exactly how the old operator system worked.
Read the passage, then answer the question. Hartwell Hardware wants every customer to be satisfied with a purchase. We accept most returns within 30 days of purchase, counting the day of purchase as day one. With a receipt, refunds go back to the original form of payment. Without a receipt, we can offer store credit at the item's lowest selling price in the past 30 days. Members of our free Pro Rewards program may return power tools for up to 90 days with a receipt. All other return rules in this notice still apply to Pro returns. Membership is free to join at the service desk, and members also receive early notice of sales. Opened or used items may be returned, but a 15 percent restocking fee applies. The fee is waived for defective items, and Pro members pay no restocking fee on items returned unopened in the original packaging. Defective items may also be exchanged for the same product at any time during the manufacturer's warranty, even after the return period ends. Special orders, materials cut to length such as rope, chain, and lumber, and mixed paint cannot be returned unless defective. Gift cards and clearance items marked final sale cannot be returned. Please bring all returns to the service desk rather than the checkout lanes. Refunds on purchases paid by check may take up to ten business days to process, and refunds to a credit card usually appear on the next statement. Items bought online may be returned to any store or shipped back with the prepaid label in the box. Shipping charges from the original order are not refunded unless the item arrived damaged or the wrong item was sent. A Pro Rewards member bought a cordless drill with a credit card 45 days ago. She has used it twice, it works fine, and she has the receipt, but she has decided she wants a lighter model. What can the store most likely offer?
- A.A full refund to her card, with the usual restocking fee waived
- B.An exchange for a lighter drill, with no restocking fee
- C.A refund to her card, minus the 15 percent restocking fee
- D.No refund at all, since the 30-day return period is over
Show answerHide answer
Correct answer: A refund to her card, minus the 15 percent restocking fee
Pro members "may return power tools for up to 90 days with a receipt," so a 45-day-old drill can still go back for a refund to the card, but "all other return rules" still apply and a used item carries the 15 percent restocking fee. The Pro fee waiver covers only items "returned unopened," and the general waiver covers only defective items, so a full refund is wrong. The 30-day limit does not apply to a Pro member's power tool, and the warranty exchange is only for defective items and only for the same product.
Read the passage, then answer the question. In August 1858, after several failed attempts, ships finished laying a telegraph cable across the floor of the Atlantic Ocean between Ireland and Newfoundland. The project had been organized and financed by a group of investors led by the American businessman Cyrus Field. Celebrations broke out on both sides of the ocean when Queen Victoria's message to the American president came through, even though the short greeting took many hours to send. The signals arriving through the long cable were extremely weak and blurred, so that operators struggled to tell one pulse from the next. Part of the trouble was the cable itself, which had been made in a hurry: its thin copper core carried signals poorly, and later study suggested that its insulation was uneven. One of the project's electricians believed the answer was to drive the signals harder, and he applied very high voltages to the line. Within about three weeks, the cable stopped working entirely. Many experts concluded that the high voltage had broken down the cable's insulation. A later cable, laid in 1866, had a heavier core and better insulation, and it was operated with sensitive receiving instruments designed to detect faint currents rather than with brute force. It carried messages reliably, and the time needed to send news between Europe and North America shrank from about ten days by ship to a matter of minutes. The 1866 cable was laid by the Great Eastern, the only ship then large enough to carry the whole length at once, and later that year its crew also recovered and completed a cable that had been lost during an attempt in 1865. Which statement about the 1858 cable is best supported by the passage?
- A.Its weak signals were likely caused by the high voltage it carried
- B.Gentler operation alone would likely have kept it working for many years
- C.Its signals were likely too weak to carry any message across at all
- D.High voltage likely broke down insulation that was already uneven
Show answerHide answer
Correct answer: High voltage likely broke down insulation that was already uneven
The passage says the cable's insulation was "uneven" from hasty manufacture and that experts concluded "the high voltage had broken down the cable's insulation," so the voltage most likely finished off insulation that was already flawed. The weak-signals option reverses cause and effect: the voltage was applied because the signals were already weak. Gentler operation alone overreaches, since the 1866 success also depended on a heavier core and better insulation, and the queen's message did get through.
Read the passage, then answer the question. For nearly eighty years, miners dug coal from the hills above Miller Creek. When the last mine closed in the 1950s, its tunnels were sealed only loosely, and rainwater and groundwater began moving through them. The rock in these hills contains pyrite, a mineral made of iron and sulfur. Buried deep and kept from air, pyrite changes very little. Mining exposed large surfaces of it to both air and water, and under those conditions it reacts to form sulfuric acid. As the acidic water seeps through the tunnels, it dissolves metals such as iron, aluminum, and manganese from the surrounding rock and carries them toward the creek. Visitors usually notice the color first. Where the mine water enters Miller Creek, the streambed is coated bright orange. The coating forms when dissolved iron meets the creek's better-oxygenated water and settles out. In many streams, such coatings smother the insects that fish feed on, and for years local anglers blamed the orange bed for the creek's empty two-mile stretch. State biologists reached a different conclusion. After a spring flood scoured one section of the bed clean, they found that fish still did not move into it. Fish held in mesh cages near the surface, away from the bottom, also did poorly below the mine. Last year, a watershed group built a channel lined with limestone, which neutralizes acid, to carry the mine water before it reaches the creek. The orange coating already on the streambed remains, and it will take years to wear away. Even so, fish counts below the channel have started to rise. Based on the passage, what is the underlying cause of the missing fish below the old mine?
- A.Pyrite exposed by mining makes acid, which carries dissolved metals into the creek
- B.Iron settling out of the mine water coats the bed and smothers the insects fish eat
- C.Pyrite deep in the hills reacts with groundwater even where no air can reach it
- D.Sediment from the loosely sealed tunnels clouds the water and buries the gravel beds
Show answerHide answer
Correct answer: Pyrite exposed by mining makes acid, which carries dissolved metals into the creek
Mining exposed pyrite to air and water, forming sulfuric acid that "dissolves metals" and carries them toward the creek, and the evidence points to that water: fish avoided a section scoured clean, caged fish "away from the bottom" did poorly, and fish returned once limestone neutralized the acid even though the orange coating "remains." So the cause is the acid and dissolved metals from exposed pyrite. The smothering coating is what anglers blamed, but the biologists' tests rule it out, and the passage says buried pyrite kept from air "changes very little."
Read the passage, then answer the question. Historians of technology have long noticed a pattern: important inventions often appear in more than one place at about the same time. When the scientific knowledge and the materials needed for a device become widely available, many inventors are likely to be working on similar problems, and more than one of them may reach a solution independently. The telephone is often cited as a case. On February 14, 1876, a lawyer for Alexander Graham Bell filed a patent application for sending speech electrically. On the same day, Elisha Gray filed a notice with the patent office describing a similar idea. Bell received the patent, and years of legal battles followed. The jet engine, developed separately in Britain and Germany in the 1930s, is another example, and calculus, worked out separately by Newton and Leibniz in the late 1600s, is a third. Historians are careful about which cases they count. A device copied from a rival's design does not fit the pattern, however close the dates, because the second inventor did not reach the solution alone. Nor does a fierce legal fight prove anything by itself; many patent battles concern devices that only one inventor actually developed. And a case fits only if the timing follows readiness: separate inventors arriving at similar answers soon after the needed knowledge and parts have become common. The pattern suggests that the story of a lone genius, while appealing, can leave out much of how invention happens. Historians do not deny that individuals matter. Skill and persistence still decide who finishes first and whose version works best, and those differences can shape which name history remembers. Which finding, if true, would most weaken the claim that the telephone fits the historians' pattern?
- A.The two men fought in court for years over who owned the idea in 1876
- B.The parts both men relied on were still rare and hard to get in 1876
- C.The device Bell built worked better than the one Gray built in 1876
- D.The two men worked in different cities and had never met before 1876
Show answerHide answer
Correct answer: The parts both men relied on were still rare and hard to get in 1876
The third paragraph says a case fits "only if the timing follows readiness," meaning similar answers soon after the needed knowledge and parts "have become common," so parts that were still rare in 1876 would undercut the telephone as an example. A court fight is tempting, but the passage says a legal battle does not "prove anything by itself." One version working better fits the point that skill decides "whose version works best," and never having met supports independent invention instead of weakening it.
Read the passage, then answer the question. After the Tamsen Fire burned into the edge of Larch Hollow last August, investigators examined each of the 112 homes that were destroyed. Many residents assumed the houses had been overrun by a wall of flame moving out of the forest. The evidence told a different story. Most of the destroyed homes stood well back from the trees, and in many cases the trees and shrubs right next to a burned house were scorched but still standing. Investigators concluded that most of the homes were set alight by embers, glowing bits of burning bark and twigs carried ahead of the fire by the wind, sometimes for a mile or more. Embers that landed in gutters packed with dry needles, on wooden decks, or in firewood stacked against walls started small fires that spread into the houses. Some embers blew in through open attic vents, and in a few places a burning house gave off enough heat to ignite the one next door. Several homes that survived stood closer to the forest than homes that burned down the same street. The houses that survived often had clear gutters, screened vents, and a strip of bare ground or gravel next to the walls. The investigators did not rank these steps against one another, noting that a home could be lost through any single gap. They also found that wooden fences attached to the walls often carried fire straight to a house. The county has since offered free gutter cleaning to older residents and is weighing a rule that would require screened vents on new homes. Which conclusion about protecting homes in Larch Hollow is best supported by the passage?
- A.A home's distance from the forest mattered more than what lay on and around it
- B.A home's screened vents mattered more than its gutters and the gravel around it
- C.A home's distance from the forest mattered less than what lay on and around it
- D.A home's cleared gutters mattered less than its distance from the houses beside it
Show answerHide answer
Correct answer: A home's distance from the forest mattered less than what lay on and around it
Most destroyed homes "stood well back from the trees," embers flew "a mile or more," and several survivors stood closer to the forest than homes that burned, while survivors "often had" clear gutters, screened vents, and bare ground by the walls; together these show that a home's surroundings mattered more than its distance from the forest. The reverse claim matches the residents' wall-of-flame view, which the evidence rejected. The vents and neighbor-distance options rank steps the investigators expressly "did not rank," and house-to-house spread happened only "in a few places."
Read the passage, then answer the question. The body's internal clock runs on a cycle of roughly twenty-four hours, and light is the strongest signal that keeps it in step with the day. Most people know the rule of thumb that morning light makes a person sleepy earlier and evening light makes sleepiness come later. The rule works for most people only because of where morning and evening happen to fall in their own cycle. What actually matters is not the hour on the wall clock but where the light lands relative to the clock's low point, the time when body temperature bottoms out. For most day sleepers the low point comes a couple of hours before they usually wake. Bright light in the hours before the low point pushes the clock later. Bright light in the hours after it pulls the clock earlier. For someone whose low point falls near 5 a.m., evening light comes before it and early-morning light comes after it, which is where the familiar rule comes from. Brightness counts as well. Ordinary indoor lamps are far dimmer than daylight, even on a cloudy day, and their effect on the clock is weak by comparison. Researchers who want to move someone's clock usually use light boxes or outdoor light. Night-shift workers complicate the picture, because their low points do not stay put. A worker whose clock has partly adjusted to nights might reach the low point in the late morning, while one who has not adjusted still reaches it near dawn. The clock moves only about an hour a day in either direction, so the shift takes time. Based on the passage, which night-shift worker's clock is most likely to be pushed later?
- A.Low point near 5 a.m.; bright light outdoors from 6 to 8 a.m.
- B.Low point near 11 a.m.; dim lamps indoors from 8 to 10 a.m.
- C.Low point near 5 a.m.; dim lamps indoors from 2 to 4 a.m.
- D.Low point near 11 a.m.; bright light outdoors from 8 to 10 a.m.
Show answerHide answer
Correct answer: Low point near 11 a.m.; bright light outdoors from 8 to 10 a.m.
The passage says bright light "in the hours before the low point pushes the clock later" and that indoor lamps have only a weak effect, so bright outdoor light from 8 to 10 a.m., ahead of an 11 a.m. low point, meets both conditions. The worker with a 5 a.m. low point gets bright light after it, which pulls the clock earlier. The two dim-lamp options fall short because ordinary lamps act only weakly on the clock, even though their timing comes before the low point.
Read the passage, then answer the question. For travelers in the 1940s, a long drive meant following two-lane highways that ran straight down the main street of almost every town along the way. Motels, diners, and gas stations lined these routes, and many small towns depended on the steady stream of passing cars. Beginning in the late 1950s, the new Interstate Highway System changed the pattern. The interstates were built as limited-access roads: drivers could enter or leave only at interchanges, and the highways usually passed around towns rather than through them. Traffic moved faster, and many drivers stopped only where an exit offered fuel and food. Planners placed interchanges according to traffic, terrain, and the cost of land, so some towns got an exit close by and others did not. The effect on towns varied. Where an interstate ran a few miles from town with no nearby exit, travelers had little reason to make the detour, and many businesses on the old main street lost most of their customers within a few years, and some closed. Towns that ended up beside an interchange usually fared better overall, though not always downtown. When the exit sat a mile or more outside town, new motels, restaurants, and gas stations tended to cluster around the ramp, often drawing trade away from the older main street even as the town's total business grew. When the exit fed traffic straight onto main street, older merchants sometimes gained customers. Over time, many towns tried to win back downtown trade with festivals, farmers' markets, and signs on the interstate pointing drivers toward historic districts, with mixed results. An interstate is built with an interchange two miles outside the town of Arden. Based on the passage, which outcome for Arden is most likely?
- A.Its total trade would likely grow as its main street lost business
- B.Its main street would likely gain, since the exit brings in drivers
- C.Its total trade would likely fall, since the interstate passes by it
- D.Its main street would likely fade as fast as a town without an exit
Show answerHide answer
Correct answer: Its total trade would likely grow as its main street lost business
Arden's exit sits "a mile or more outside town," and in that case new businesses clustered at the ramp, "drawing trade away from the older main street even as the town's total business grew." Main-street gains came only "when the exit fed traffic straight onto main street," which is not Arden's case. Towns beside an interchange "usually fared better overall," so neither a fall in total trade nor a decline as steep as a no-exit town's is supported.
Read the passage, then answer the question. When people sleep less than their bodies need, the shortfall does not simply vanish. Researchers call the accumulated loss sleep debt. A person who needs eight hours but gets six on each of five workdays has built up roughly ten hours of debt by Friday night. Losing an hour here and there may seem harmless, but the effects add up in ways people often fail to notice. Not every debt behaves the same way. After a single short night, most healthy adults recover with one longer night of sleep, and their reaction times and attention scores the next day return to their usual range. A debt built up over many nights is harder to clear. In one laboratory study, volunteers were limited to short sleep for a full work week and then allowed two nights of unlimited sleep. Afterward they rated themselves nearly as alert as they had been at the start, and their mood scores improved noticeably. On tests of reaction time and sustained attention, however, their scores stayed below their starting levels and below those of a comparison group that had slept fully all week. Many of the volunteers were surprised when they saw their results. Sleep researchers draw two lessons from findings like these. First, how rested a person feels is a poor guide to how well that person will do on tasks that demand steady attention, such as driving at night or watching a gauge for hours. Second, steady schedules work better than cycles of shortage and catch-up. Going to bed at the same time each night, weekends included, keeps the body's internal clock stable and makes falling asleep easier. Dana needs eight hours of sleep. She sleeps six hours each weeknight, then sleeps late on both Saturday and Sunday. Based on the passage, what is most likely true of Dana on Monday morning?
- A.Her test scores will be back in range, since a long night makes up a short one
- B.Her sense of alertness will overstate how well she can hold steady attention
- C.Her mood will be no better than it was at the end of the workweek
- D.Her body clock will run more steadily after the extra hours of weekend sleep
Show answerHide answer
Correct answer: Her sense of alertness will overstate how well she can hold steady attention
Dana built a five-night debt, which the passage says "is harder to clear" than one short night; after two recovery nights, volunteers "rated themselves nearly as alert" yet their attention scores "stayed below their starting levels," and the passage warns that how rested a person feels "is a poor guide." So her sense of alertness will overstate how well she can hold steady attention. The one-long-night recovery applies only "after a single short night," mood actually "improved noticeably," and steady bedtimes, not catch-up sleep, are what keep the body clock stable.
Read the passage, then answer the question. The electric telegraph, developed in the 1830s and 1840s, sent messages as pulses of current along a wire. In the United States, Samuel Morse and his partners promoted a system in which an operator tapped out a code of short and long signals that a receiving instrument could record or that a trained listener could hear. A message that once took days by mail could now arrive in minutes. Early lines faced a basic problem. The current grew weaker the farther it traveled along the wire, and over long distances the signal became too faint to work the receiving instrument. Simply using a stronger battery at the sending end helped only up to a point, and very high voltages could damage a line's insulation. The practical answer on land was the relay, a device in which a weak incoming current switched on a fresh local battery, which then sent a strong copy of the signal down the next section of line. Undersea cables posed a harder version of the same problem, because there was no place in the middle of an ocean to station a relay and its battery. Cable engineers instead built extremely sensitive receiving instruments that could detect currents far too weak for an ordinary telegraph receiver. With relays placed at intervals, an overland message could travel hundreds or even thousands of miles. In October 1861 a telegraph line was completed across the North American continent, and the Pony Express, which had carried mail on horseback between Missouri and California, shut down within days. Telegraph companies soon strung many of their wires along railroad lines, where crews could reach them for repairs. Which statement about the 1861 line across the continent can be inferred from the passage?
- A.It relied on one strong battery at the sending end to push signals the whole way
- B.It relied on very sensitive receivers to catch the faint signals at the far end
- C.It relied on fresh local batteries to renew the signal at points along the way
- D.It relied on riders to carry messages across gaps between finished sections
Show answerHide answer
Correct answer: It relied on fresh local batteries to renew the signal at points along the way
The cross-continent line was an overland line, and on land "the practical answer" to fading current was the relay, which used "a fresh local battery" to send a strong copy down the next section; with relays at intervals a message could travel "thousands of miles." So the line relied on fresh local batteries to renew the signal along the way. Sensitive receivers were the solution for undersea cables, where relays could not be placed, and a stronger sending battery "helped only up to a point."
Read the passage, then answer the question. Members of the Northline maintenance crew used to specialize. One person handled pumps, another handled controls, and a third did all the welding. The system worked well on ordinary days, because each person was fast at a familiar task. It worked poorly when someone was out sick or on vacation, since a job that needed the absent person's skill often waited until that person came back. Two years ago, the crew began cross-training, with each member spending part of every week learning another member's specialty. The early months were slow. Jobs took longer because workers were practicing tasks they had not yet mastered, and the crew's monthly output dipped by about a sixth. Some members worried that learning a new skill would take time away from their own work. By the end of the first year, output had returned to its old level, though not above it, and it has held there since. More important to the plant manager, the number of jobs left waiting because of an absence fell sharply. Overtime pay dropped as well, since fewer jobs had to be squeezed in after an absent worker returned. Cross-training has limits, however. Repairs to the plant's pressure tanks must be welded by a state-certified welder, and only the crew's welder holds that certificate. When he broke his wrist last winter, two other crew members covered his ordinary welding for six weeks without falling behind, but two tank repairs waited until the plant could bring in a certified contract welder. The plant manager has since asked a second crew member to study for the certificate. Which conclusion is best supported by the passage?
- A.It ended absence delays on every job once the slow early months had passed
- B.It raised output above its old level once the slow early months had passed
- C.It cut absence delays on most jobs, though output has stayed below its old level
- D.It cut absence delays on most jobs, though certified welding still had to wait
Show answerHide answer
Correct answer: It cut absence delays on most jobs, though certified welding still had to wait
Jobs left waiting because of an absence "fell sharply," yet two tank repairs "waited until the plant could bring in a certified contract welder," so cross-training cut absence delays on most jobs, though certified welding still had to wait. The every-job option ignores those two tank repairs. Output "returned to its old level, though not above it," which rules out both the raised-output option and the stayed-below option.
Read the passage, then answer the question. The fire at the Linden Court apartments began shortly after 2 a.m. in a second-floor unit, where a tenant had left a pot on the stove. The building's alarm sounded within a minute. The tenant escaped and pulled her apartment door shut behind her, as fire safety guides advise, which kept the flames inside the unit. The fire never spread beyond that one apartment. The smoke was a different matter. Even with the apartment door closed, smoke seeped around its edges and slowly filled the second-floor hallway. Linden Court has a single interior stairway, and the doors to it on each floor are fire doors, built to swing shut on their own and keep smoke out of the stairs. On the third and fourth floors, those doors were closed as designed. The second-floor stair door, however, had been propped open with a rubber wedge, and smoke from the hallway poured into the stairway and rose through it. The first-floor stair door also stood open for much of the night as tenants streamed out through it, but the first-floor hallway stayed clear, since smoke rises and the fire was above it. Most tenants on the lower floors were outside within ten minutes. Tenants on the third and fourth floors who tried the stairs found them full of smoke, and firefighters brought eleven people down by ladder. After the fire was out, firefighters opened windows on every floor to clear the remaining smoke. They noted that tenants should not do this while a fire is still burning, because fresh air can feed the flames. The passage supports each of the following statements EXCEPT:
- A.The tenant's closed apartment door kept the smoke out of the hallway
- B.The first-floor stair door added little smoke to the stairway that night
- C.The upper stair doors closed as designed yet the stairway still filled
- D.Opening windows during the fire could have helped the flames to grow
Show answerHide answer
Correct answer: The tenant's closed apartment door kept the smoke out of the hallway
The second paragraph says that "even with the apartment door closed, smoke seeped around its edges and slowly filled the second-floor hallway," so the closed door kept in the flames but not the smoke. The first-floor option is supported because that hallway "stayed clear, since smoke rises," and the upper-door option is supported because smoke entered through the propped second-floor door and rose into the stairway.
Read the passage, then answer the question. Copper is one of the few industrial materials that can be recycled again and again without losing any of its useful properties. Paper is different: its fibers grow shorter each time it is pulped, so it can be recycled only a limited number of times. A copper pipe melted down and refined today can become wire tomorrow that conducts electricity just as well as wire made from freshly mined ore. Scrap yards pay sellers by weight and sort what they receive into grades. Bright, clean wire with the insulation removed earns the most per pound, because it needs little further refining before reuse, and its price follows the price of new copper closely. Copper mixed with solder, paint, or other metals earns noticeably less, since it must be refined further, and the cost of that work comes out of the seller's price. Even badly mixed scrap, though, can be refined back into copper as good as new. Many people assume copper is valuable mainly because good ore is running out. In fact, mining companies have kept finding new deposits, though often of lower grade. What sets copper apart is how well it holds its value through repeated use. Prices for new copper rise and fall with demand from builders and factories, and scrap prices move with them. The value of scrap has an unwelcome side effect. In periods when copper prices climb, police in many areas report more thefts of pipe and wire from vacant houses, construction sites, and unattended equipment. Some states now require scrap yards to record each seller's identity and to hold certain items for several days before paying. Which statement would the author most likely agree with?
- A.Copper's value comes mostly from the shrinking supply of good ore
- B.Rules that delay payment for scrap are meant to make theft less rewarding
- C.Scrap copper of every grade sells for close to the price of new copper
- D.Copper outlasts paper in recycling only when the copper is kept clean
Show answerHide answer
Correct answer: Rules that delay payment for scrap are meant to make theft less rewarding
The fourth paragraph links rising prices to more thefts of pipe and wire and then describes rules making yards record each seller and "hold certain items for several days before paying," which only makes sense as a check on stolen metal. The every-grade option fails because mixed copper "earns noticeably less"; clean copper's close tracking of new prices is true only for the top grade. The clean-copper option fails because "even badly mixed scrap" can be refined to copper as good as new.
Read the passage, then answer the question. Drivers who switch from gasoline cars to electric vehicles often find that the familiar rules about fuel economy seem to run backward. A gasoline car usually does better on the highway than in town, because stop-and-go driving wastes fuel: the engine burns gas while idling, and the energy used to speed up is lost as heat in the brakes every time the car stops. An electric vehicle loses much less in town. Its motor draws little power while the car waits at a light, and when the driver slows down, the motor can run in reverse as a generator and send some of the car's energy back into the battery. This regenerative braking never recovers all of that energy, since some is lost as heat in the motor, the wiring, and the battery, but the more slowing a trip involves, the more there is to win back. Cold weather changes the picture. A cold battery holds less usable energy, and heating the cabin draws power for as long as the car is running, not for each mile it travels. Many newer models use a heat pump, which moves heat in from the outside air and uses far less energy than a simple electric heater in mild cold. As the outside air gets colder, though, there is less heat to gather, and the heat pump's advantage shrinks. On the highway, there is little slowing to recover energy from, and the push needed to move through the air rises sharply with speed. For these reasons, many electric vehicles travel farther on a charge in summer city driving than at a steady 70 miles per hour. The passage supports each of the following statements EXCEPT:
- A.Cabin heat takes a larger share of energy per mile on slow trips than on fast ones
- B.Regenerative braking sends energy back to the battery but loses some of it along the way
- C.A heat pump's edge over a simple electric heater grows as the outside air gets colder
- D.Air resistance takes more energy per mile at highway speed than at a slow city pace
Show answerHide answer
Correct answer: A heat pump's edge over a simple electric heater grows as the outside air gets colder
The third paragraph says the heat pump uses far less energy "in mild cold" but that as the air gets colder "the heat pump's advantage shrinks," so the claim that its edge grows is the one the passage contradicts. The tempting option about cabin heat is supported: heating draws power "for as long as the car is running, not for each mile," so a slow trip spends more heating energy per mile.
Read the passage, then answer the question. The Corran River once carried millions of tons of sand and silt to the sea each year. Where the river met the coast, that sediment settled out at the river's mouth and built a broad, marshy delta whose outer shoreline was still advancing in the middle of the twentieth century. The delta has long faced other pressures. Levees, most finished in the 1920s, keep floodwater from spreading over the inner marshes, so those marshes receive little fresh silt; the outer shoreline, which is fed by sediment dropped at the mouth, was not affected by them. The soft mud beneath the delta slowly packs down under its own weight, as it has for as long as the delta has existed. Sea level along this coast has also been creeping upward since at least the late 1800s. In the 1950s and 1960s, three large dams were built upstream to store water and control floods. In the still water of each reservoir, sand and silt sink to the bottom and stay there, and below the dams the river runs noticeably clearer than it once did. Within a few decades, surveyors found that the outer shoreline had begun to retreat. Waves and currents had always worn away the edge of the delta, but for centuries the river had delivered enough new sediment to more than make up the loss. Most geologists who have studied the delta conclude that the dams set off the retreat by cutting the supply of sediment reaching the mouth. Some residents have proposed piping sand from offshore to rebuild the beaches, an idea that engineers say would be costly and would need to be repeated. Which finding, if true, would most weaken the geologists' conclusion?
- A.Sea level along the coast rose at about the same steady pace before and after the dams were built
- B.Levees along the inner marshes were raised a second time after the dams were built
- C.Streams joining the river below the dams carried little sediment after the dams were built
- D.Sediment measured at the river's mouth stayed about the same after the dams were built
Show answerHide answer
Correct answer: Sediment measured at the river's mouth stayed about the same after the dams were built
The geologists say the dams caused the retreat "by cutting the supply of sediment reaching the mouth," so finding that sediment at the mouth stayed about the same would remove the mechanism they rely on. Steady sea-level rise cannot explain why retreat began when it did, so it leaves the dams as the likeliest cause. Raised levees affect only the inner marshes, since the second paragraph says the outer shoreline "was not affected by them," and streams below the dams carrying little sediment would support the conclusion rather than weaken it.
Read the passage, then answer the question. For most of the twentieth century, farms in the Corvel Valley drew their irrigation water from wells. Beneath the valley lies an aquifer, a thick layer of sand and gravel whose open spaces hold water, broken in places by beds of clay. As more land was planted, pumping outpaced the rain and snowmelt that refill the aquifer, and the water table fell year after year. The falling water table had a second effect. Clay beds hold water too, and when the surrounding water pressure drops, the clay slowly squeezes its water out and compacts. Where the clay is thickest, the ground has sunk by several feet, cracking canals and tilting well casings. Because water seeps out of a thick clay bed only gradually, such a bed can go on compacting for years after the water level around it has stopped falling. Geologists warn that the compaction is largely permanent: compacted clay does not swell back to its former size, and the room it once offered for water is lost for good. Sand and gravel behave differently. When pumping slows and water returns to their open spaces, they spring back slightly, and survey markers in some parts of the valley have risen a fraction of an inch in wet years. That small rebound can hide the fact that the clay beneath has not recovered at all. In recent years, water districts have paid some farmers to leave fields unplanted during dry years. Officials hope the water table will hold steady, though they concede that ground already lost will not come back. A survey marker above a thick clay bed rose a fraction of an inch during a wet year after heavy pumping had ended. Based on the passage, which conclusion is best supported?
- A.The rise most likely came from the sand and gravel, with no recovery in the clay
- B.The rise most likely came from the clay, which has now begun to swell toward its old size
- C.The rise most likely shows that the clay at the site has now stopped compacting
- D.The rise most likely shows that the aquifer there again holds as much water as before
Show answerHide answer
Correct answer: The rise most likely came from the sand and gravel, with no recovery in the clay
The third paragraph says sand and gravel "spring back slightly" when water returns and that this rebound "can hide the fact that the clay beneath has not recovered at all." The tempting claim that the clay has stopped compacting ignores the second paragraph, which says a thick bed "can go on compacting for years after the water level around it has stopped falling"; the clay never swells back, and its lost storage is "lost for good."
Read the passage, then answer the question. Ordinary steel left outdoors rusts, and the rust flakes away, exposing fresh metal that rusts in turn. For this reason, most steel bridges must be painted and repainted over their lives, an expensive job that often means closing lanes and sending crews to hard-to-reach sites. Weathering steel, which contains small added amounts of copper, chromium, and other elements, behaves differently. Through repeated cycles of wetting and drying, it forms a tight, dark brown layer of rust that clings to the surface and greatly slows further corrosion. Frequent rain is not a problem in itself; a girder soaked by a storm that dries within a day or two is going through exactly the cycle the layer needs. Shade alone also does little harm, as long as air moves freely around the steel. The layer takes several years to mature, and until it does, loose rust washes off in the rain and can stain the concrete piers below, so designers often add drip channels to carry the runoff away. The layer does depend on the dry half of the cycle. Where steel stays damp for long stretches, as under leaking deck joints or inside thick brush, the layer does not form properly. Salt is the other enemy. It holds moisture on the surface, and it also attacks the steel directly. Bridges near the ocean are a common problem, and so are bridges over highways that are salted all winter, where passing trucks throw up a salty mist. Engineers who choose weathering steel therefore study the site before deciding to leave a bridge unpainted. Where the conditions are right, many such bridges have gone decades without paint. Based on the passage, which statement about weathering steel is best supported?
- A.Its protective layer forms more slowly in shade than in full sun, even where air moves freely
- B.Rain falling on it several times a week does not by itself rule out leaving it unpainted
- C.Its protective layer is fully formed within a few months after the bridge first opens
- D.Salt harms it chiefly by keeping its surface wet, not by attacking the metal itself
Show answerHide answer
Correct answer: Rain falling on it several times a week does not by itself rule out leaving it unpainted
The second paragraph says "frequent rain is not a problem in itself" as long as the steel dries within a day or two, because wetting and drying is the cycle the layer needs. The shade option is contradicted by "shade alone also does little harm, as long as air moves freely," the months option by "the layer takes several years to mature," and the salt option by "it also attacks the steel directly."
Read the passage, then answer the question. Sweating cools the body only when the sweat evaporates. As liquid water on the skin turns into vapor, it carries heat away with it. Sweat that drips off the body or soaks into clothing removes very little heat, so a worker can be drenched and still be growing hotter. Wiping sweat away with a towel, by the same logic, removes moisture that could have done some cooling. How quickly sweat evaporates depends largely on how much moisture is already in the air. In humid air, the air next to the skin already holds nearly all the water vapor it can, so evaporation slows and sweat builds up. For this reason, weather services combine temperature and humidity into a single number, the heat index, meant to reflect how hot conditions feel to the body, and supervisors often use it to set work and rest schedules. The figure is calculated for shade, however, and working in direct sun can make conditions feel considerably hotter than the reported number. Moving air usually helps by carrying damp air away from the skin and replacing it with drier air. The help has limits. Skin is normally cooler than the body's core, and when the surrounding air is hotter than the skin, a breeze also delivers heat to the body even as it speeds evaporation. Health agencies therefore caution that once temperatures climb into the upper 90s, a fan alone may not prevent heat illness. In dry air, the opposite problem appears. Sweat can vanish almost as soon as it forms, and because their skin stays dry, people working in desert heat often lose more water than they realize. A supervisor sets rest breaks for a roofing crew working in full sun using the heat index from the local weather report. Based on the passage, which conclusion is best supported?
- A.The breaks are likely about right, since the index already counts the day's humidity
- B.The breaks are likely too few, since the index leaves the day's humidity out of the figure
- C.The breaks are likely too few, since the index is figured for shade rather than full sun
- D.The breaks are likely too many, since a steady breeze will speed the crew's sweat drying
Show answerHide answer
Correct answer: The breaks are likely too few, since the index is figured for shade rather than full sun
The second paragraph says the heat index "is calculated for shade" and that "working in direct sun can make conditions feel considerably hotter than the reported number," so a crew in full sun likely needs more rest than the index suggests. The option that reaches the same conclusion by claiming the index leaves out humidity has the right result for a wrong reason, since the index combines "temperature and humidity"; the breeze option ignores that a breeze can deliver heat.
Read the passage, then answer the question. Rags used to apply oil-based stains and finishes, especially those made with linseed oil, can catch fire with no flame or spark nearby. The reason lies in how these oils dry. Unlike water, they do not simply evaporate. They harden by reacting with oxygen in the air, and that reaction gives off heat. Not every oil behaves this way. Motor oil and most other petroleum oils do not harden by reacting with air, so rags soaked in them do not heat up on their own, even in a hot room, though they will burn readily if a flame reaches them. A single linseed-oil rag spread out on its own is also safe, because it loses its heat to the surrounding air almost as fast as the heat forms. A crumpled pile is different. The cloth at the center is wrapped in more cloth, which holds the heat in, while the loose weave still lets air reach the oil. As the temperature inside the pile rises, the reaction speeds up and makes heat faster still. A warm room shortens the time this takes, but piles have also ignited in cool garages and unheated sheds, sometimes many hours after the work was done. For this reason, finishing crews are told never to toss used rags into a trash can or leave them in a heap. Rags should be hung or spread flat outdoors to dry, away from buildings, or placed in a metal container filled with water and closed with a tight lid. The water and the lid together keep air away from the oil, so the drying reaction cannot continue, and any heat that does form is carried off by the water. Based on the passage, which of these would pose the greatest risk of a fire starting with no flame or spark nearby?
- A.Motor-oil rags left heaped in a closed, hot shed on a summer afternoon
- B.Linseed-oil rags hung one by one on a fence in the hot afternoon sun
- C.Linseed-oil rags kept in a closed, water-filled metal can in a warm room
- D.Linseed-oil rags left heaped in an unheated garage on a cool night
Show answerHide answer
Correct answer: Linseed-oil rags left heaped in an unheated garage on a cool night
The second paragraph says a crumpled pile holds in heat while still letting air reach the oil, and that "piles have also ignited in cool garages and unheated sheds," so a heap of linseed-oil rags is the danger even when the air is cool. The hot-shed option fails because motor oil does "not heat up on their own, even in a hot room"; rags hung singly shed their heat, and the water-filled can keeps air away.
Read the passage, then answer the question. Every apprentice must record on-the-job training hours in the program's online logbook by the end of each pay week. An entry shows the date, the contractor, the number of hours, and the type of work. The apprentice's job-site supervisor then has fourteen days from the date of entry to review it. Confirmed hours count toward two running totals: the one the committee uses to decide when an apprentice is ready for the next pay step, and the eight thousand hours needed to complete the program. A supervisor who believes an entry is wrong marks it rejected. Rejected hours are cleared from the logbook, and the apprentice must enter them again with corrected details. An entry the supervisor simply never reviews within fourteen days is placed in suspense instead. Hours in suspense stay in the logbook, shown in gray, but are left out of both totals. Hours still in suspense sixty days after they were placed there are removed for good. Clearing suspended hours is the apprentice's job. The training office will contact a contractor directly only when that contractor has gone out of business; in every other case, the apprentice must obtain a signed statement from the contractor or supervisor and upload it. Once the statement is accepted, the hours rejoin both totals, dated to the week in which they were worked. The logbook can be updated from a phone, and most apprentices find that entering a week's hours takes less than five minutes. Apprentices who enter hours daily, rather than at the end of the week, report fewer rejected entries, since the details are still fresh. None of the apprentices below has uploaded a signed statement. As the passage uses the term, which hours are "in suspense" today?
- A.Hours entered 70 days ago that the supervisor never reviewed
- B.Hours entered 80 days ago that the supervisor never reviewed
- C.Hours entered 12 days ago that the supervisor has not reviewed
- D.Hours entered 30 days ago that the supervisor rejected on day 5
Show answerHide answer
Correct answer: Hours entered 70 days ago that the supervisor never reviewed
Unreviewed hours go into suspense after the fourteen-day review window and are removed "sixty days after they were placed there," so they stay in suspense from day 14 to day 74 after entry; hours entered 70 days ago are still in suspense. Hours entered 80 days ago passed day 74 and were removed, and readers who count sixty days from the entry date wrongly think the 70-day hours are gone too. Hours entered 12 days ago are still inside the review window, and rejected hours are cleared rather than suspended.
Read the passage, then answer the question. Homeowners who want lower energy bills often ask which project to tackle first. Energy advisers answer by comparing the return each project offers: the yearly savings divided by the money spent to get them. A full window replacement might cost 12,000 dollars and trim 300 dollars a year from heating and cooling bills, a return of only 2.5 percent. Sealing air leaks in the attic and basement might cost 1,000 dollars and trim 250 dollars a year, a return of 25 percent, which is why advisers so often recommend it first. Timing changes the math. When a furnace has failed and must be replaced anyway, the household will spend most of the money whatever it chooses. Advisers then count only the difference in price between an ordinary model and an efficient one, since that extra amount is the only money spent for the sake of savings. Suppose an ordinary furnace costs 4,000 dollars and an efficient one costs 4,800 dollars, and the efficient one saves 240 dollars a year more. Bought when the old furnace fails, it is judged on 800 dollars. Bought to replace a furnace that still works, it is judged on the full 4,800. Some sellers argue that new windows pay off in another way, by raising the price the house will bring when it is sold. Advisers are more cautious. What a buyer will pay for any one upgrade varies widely from market to market and is hard to predict years ahead, so advisers leave it out of the return. None of this means a low-return project is foolish. A homeowner may want new windows for comfort or looks. But for someone whose only goal is to cut bills, the return is the place to start. Using the advisers' meaning of "return," which of these choices offers the best return?
- A.Sealing the air leaks in the attic and the basement of the house
- B.Buying the efficient furnace after the old one has broken down
- C.Replacing a still-working furnace early with the new efficient model
- D.Replacing the windows and counting the value they add at resale
Show answerHide answer
Correct answer: Buying the efficient furnace after the old one has broken down
When the old furnace has failed, paragraph 2 says only the 800-dollar difference counts, so 240 divided by 800 gives a 30 percent return, beating the 25 percent from air sealing. Air sealing is the tempting choice because paragraph 1 says advisers "so often recommend it first," but that is a comparison with windows, not with the failed-furnace case. Replacing a working furnace is judged on the full 4,800 dollars (5 percent), and advisers "leave it out of the return" when counting resale value, leaving windows at 2.5 percent.
Read the passage, then answer the question. This Equipment Rental Agreement is made between Ridgeline Tool Rental (the Owner) and the customer named below (the Renter). In consideration of the rental fee shown on the front of this form, the Owner agrees to provide the equipment described there in clean, safe working condition for the full rental period. The Renter agrees to use the equipment only for its intended purpose and only at the job address listed. The Renter may not lend, sublet, or move the equipment to another site without written approval from the Owner. Out of consideration for neighbors, gas-powered equipment should not be run before 7 a.m. or after 8 p.m. The rental period begins when the equipment leaves the Owner's yard and ends when it is checked back in. Equipment returned more than one hour late will be charged for an additional day. The Owner will take a Renter's request for a particular model into consideration when assigning units but does not guarantee that the model will be available. As it is used in paragraph 1, what does the word "consideration" most nearly mean?
- A.Kind regard for how other people will be affected
- B.A lower price offered to a regular, returning customer
- C.Payment given in return for the other side's promise
- D.Thought given to a request before making a decision
Show answerHide answer
Correct answer: Payment given in return for the other side's promise
In paragraph 1 the Owner promises to provide the equipment "in consideration of the rental fee," meaning the fee is what the Renter gives in exchange for that promise. Kind regard for others is the sense in paragraph 2 ("out of consideration for neighbors"), and thought given to a request is the sense in paragraph 3. Both are real meanings, just not the one used in paragraph 1.
Read the passage, then answer the question. An energy auditor usually begins by looking at a home's shell. Heated air does not care whether it leaves through a thin wall, a poorly sealed window frame, or a crack where the walls meet the foundation; it escapes wherever the barrier between heated space and unheated space is weakest. For that reason, auditors examine walls, roofs, windows, doors, and floors as one connected system rather than one piece at a time. Where that barrier runs depends on how the house is used, not on how it looks from the street. A wall between a heated kitchen and a heated living room keeps heat inside the house either way, so it is not part of the shell. A wall between the living space and an attached, unheated garage is part of it, even though nobody sees it from outside, while the garage's own outer walls are not, since they separate one unheated space from another. The same logic applies at the top and bottom of the house. When the attic is unheated, the shell runs along the attic floor, and the roof above it is simply weather protection. When the basement is unheated, the shell is the floor above it; only in a heated basement do the basement walls become part of the barrier. A common tool is the blower door, a powerful fan fitted into an exterior doorway. The fan lowers the indoor pressure, so outside air rushes in through every leak, and the auditor walks from room to room with a smoke pencil or an infrared camera to find where drafts enter. Builders sometimes use the same word another way. During construction, a shell can mean a building whose framing and roof are finished but whose inside is still bare. As auditors use the word "shell," which of these is part of the shell of a house with a heated basement, an unheated attic, and an unheated attached garage with a heated bedroom built above it?
- A.The floor between the heated basement and the kitchen
- B.The roof that covers the house's unheated attic space
- C.The garage's outer wall that faces the driveway
- D.The floor of the heated bedroom built above the garage
Show answerHide answer
Correct answer: The floor of the heated bedroom built above the garage
The shell is "the barrier between heated space and unheated space," so the floor of a heated bedroom sitting over an unheated garage is part of it, just as the attic floor is when the attic is unheated. The garage's outer wall is tempting because it faces outdoors, but the passage says it separates "one unheated space from another"; the basement-to-kitchen floor joins two heated spaces, and the roof over an unheated attic is "simply weather protection."
Read the passage, then answer the question. Students who withdraw from a course at the Brookfield Training Center may be entitled to part of their tuition back. Refunds are made on a pro rata basis, less a 40-dollar processing fee. For a twelve-session course, for example, a student whose withdrawal takes effect after the fourth session receives two-thirds of the tuition, minus the fee. Students who withdraw before the first session receive the full tuition, less the same fee. The date that counts is not the date of the last class attended. A withdrawal takes effect on the day the training office receives a written request, and only sessions scheduled after that day are refunded. A message to an instructor, even one sent weeks earlier, does not count as notice. The office stamps each request with the date it arrives and emails the student a copy. Students who stop attending without writing to the office may find that most of the course has passed before their withdrawal takes effect. No refund is made once the final third of a course has begun. Students with a serious illness or a family emergency may ask the refund committee to make an exception. The committee reviews each case on its own and may approve a full refund or a credit toward a later course, but it is not required to do either. Fees for books, tools, and materials are not refundable under any part of this policy, because those items are the student's to keep. Refunds are paid by the same method used for payment, usually within 30 days after the withdrawal takes effect. As used in the passage, a "pro rata" refund is one that is
- A.scaled to the sessions left after the office gets notice
- B.scaled to the sessions left after the instructor is told
- C.scaled to the sessions held before the student withdrew
- D.scaled to the sessions left after the last class attended
Show answerHide answer
Correct answer: scaled to the sessions left after the office gets notice
The worked example pays back two-thirds of the tuition after four of twelve sessions, which is the share still to come, and paragraph 2 says only "sessions scheduled after" the day the office "receives a written request" are refunded. Scaling to sessions already held gets the example backwards (it would give one-third). The last class attended and a message to the instructor are both rejected by name in paragraph 2.
Read the passage, then answer the question. Every new apprentice serves a probationary period covering the first 1,000 hours of on-the-job training, which for most people takes about six months. Hours count toward the period only from the first day of work after the apprentice and the committee have signed the apprenticeship agreement; time spent as a helper before signing does not count. During probation, the apprentice earns training credit for every hour worked, just as later in the program. What differs is how the agreement can end. While the period lasts, the committee may cancel it for poor attendance, unsafe work, or lack of progress without holding a hearing. Once the period is over, the committee may cancel only after written notice, a hearing, and a chance for the apprentice to respond. The committee may extend the period by up to 500 hours, but only for an apprentice who has missed a large amount of work because of illness or injury; absences for any other reason do not extend it. The word probation appears once more in this handbook, with a different meaning. An apprentice who has completed the probationary period and is later found, after a hearing, to have broken a program rule may be placed on disciplinary probation for up to ninety days. Disciplinary probation does not remove the right to a hearing before any cancellation. Apprentices who transfer in from another approved program with more than 1,000 credited hours do not serve a second probationary period, and their rights if the agreement is later cancelled are the same as those of apprentices who completed probation here. Under the handbook, which apprentice's agreement could the committee still cancel without a hearing?
- A.One at 1,150 hours who missed six weeks of work caring for a sick parent
- B.One at 1,200 hours whose period was extended 300 hours after a back injury
- C.One at 1,050 hours who is now serving ninety days of disciplinary probation
- D.One who transferred in with 1,100 hours and has since worked 200 hours here
Show answerHide answer
Correct answer: One at 1,200 hours whose period was extended 300 hours after a back injury
Paragraph 2 lets the committee extend probation by up to 500 hours after illness or injury, so an apprentice extended 300 hours stays on probation until 1,300 hours and at 1,200 hours can still be cancelled "without holding a hearing." The apprentice at 1,150 hours is past the 1,000-hour period, and nothing says the committee extended it, so that apprentice now has the right to a hearing. Disciplinary probation "does not remove the right to a hearing before any cancellation," and an apprentice who transferred in with more than 1,000 hours serves no second probationary period.
Read the passage, then answer the question. Every Carrow water heater sold after January 1 carries a six-year limited warranty on the tank and a one-year warranty on all other parts. Coverage begins on the date of installation, as shown on the installer's receipt. If no receipt can be produced, coverage begins ninety days after the date of manufacture printed on the label, which in most cases shortens the time an owner is covered. Owners who register the heater within 30 days of installation receive one extra year of tank coverage. Registration can be completed online or by mailing the card included with the heater, and a mailed card counts as received on the date it is postmarked. A heater registered after the 30-day window is still covered for the standard six years, but it does not earn the extra year, and the extra year cannot be added later by the owner or by anyone else. If the home is sold, the warranty passes to the new owner for the remaining term. The new owner does not need to register the heater again but should keep the original installation receipt, because Carrow will ask to see it before approving any claim. Any extra year a heater has earned stays with the heater. A heater that is removed and installed at a different address, however, is no longer covered. Claims must be filed through a licensed plumber, who will inspect the heater and send the findings to Carrow. Carrow may change the terms of this warranty for heaters sold after a future date, but no change will apply to heaters already installed. Dana Ruiz had a Carrow heater installed on March 1, 2021, kept the installer's receipt, and mailed the registration card with a postmark of April 12, 2021. She sold the house on March 1, 2025. For the buyer, "the remaining term" of tank coverage in paragraph 3 is
- A.One year of tank coverage
- B.Three years of tank coverage
- C.Two years of tank coverage
- D.Six years of tank coverage
Show answerHide answer
Correct answer: Two years of tank coverage
The card was postmarked 42 days after installation, past the 30-day window, so the tank has only the standard six years, running from March 1, 2021 to March 1, 2027; two years of tank coverage are left at the 2025 sale. Three years of tank coverage counts the extra year, which paragraph 2 says a late registration does not earn, and six years of tank coverage wrongly treats the sale as starting a fresh term. One year of tank coverage borrows the one-year figure that applies only to the other parts.
Read the passage, then answer the question. When a plant is carried to a new continent, it usually leaves behind the insects, fungi, and other organisms that fed on it at home. Ecologists call this enemy release. Freed from those pressures, some newcomers grow faster and spread more widely than they ever did in their native range. Japanese knotweed is a well-known case. In Britain, where it was brought in as a garden ornament during the 1800s, it spreads by underground stems and can push up through cracks in paving. Its early growth each spring lets it shade out native plants before they leaf out, and it is hard to remove because small pieces of root can sprout into new plants. That advantage does not always last. Studies of some introduced plants suggest that, over decades, local insects and diseases may begin to feed on them, slowly narrowing the gap between newcomers and native species. Some countries have also released a carefully tested insect from a plant's home range to speed up this process. In paragraph 3, what does the phrase "That advantage" refer to?
- A.Early spring growth that lets a newcomer shade out native plants
- B.Underground stems that can push up through cracks in paving
- C.Small root pieces that can sprout into whole new plants
- D.Freedom from the insects and diseases that fed on it at home
Show answerHide answer
Correct answer: Freedom from the insects and diseases that fed on it at home
Paragraph 3 says the advantage fades as "local insects and diseases may begin to feed on" the newcomers, and that some countries release an insect "from a plant's home range." That only makes sense if the advantage was freedom from those enemies, the "enemy release" defined in paragraph 1. Early spring growth is the nearest advantage in the text, but insects feeding on the plant would not take it away.
Read the passage, then answer the question. This section of the owner's manual covers the limited warranty on your Halvorsen portable generator. Please read it before you file a claim. Repairs needed because of a defect in materials or workmanship are covered for two years from the date of purchase. To make a claim, take the generator and your receipt to the dealer that sold it. The dealer inspects the unit, makes the repair, and is then paid back by Halvorsen, so the owner pays nothing for an approved claim. Damage caused by stale or contaminated fuel is not covered, and neither is normal wear on parts such as spark plugs and air filters, which owners are expected to replace on the schedule in this manual. Keep your receipt with this manual; without proof of the purchase date, the dealer will date the warranty from the day the generator left the factory. Owners who store the generator outdoors should keep it under a fitted, weatherproof cover. Rust caused by rain or snow is treated as a lack of maintenance and will not be repaired under the warranty. Oil should be changed after the first 20 hours of use and every 100 hours after that, and a record of these changes may be requested with a claim. Some losses fall outside this warranty entirely. A generator that is stolen, or damaged in a flood or a fallen-tree accident, is not the product of a defect. A homeowner's insurance policy may pay for such losses, depending on its terms, so owners should ask their insurer what the policy includes. As it is used in paragraph 2, what does the word "covered" most nearly mean?
- A.Paid for by Halvorsen under its own warranty
- B.Paid for by the dealer that sold you the generator
- C.Paid for by the owner's homeowner insurance
- D.Described and explained in this manual section
Show answerHide answer
Correct answer: Paid for by Halvorsen under its own warranty
In paragraph 2 the dealer makes the repair "and is then paid back by Halvorsen, so the owner pays nothing," which makes "covered" mean paid for by Halvorsen under the warranty. The dealer only does the work and is reimbursed, so it does not bear the cost. Homeowner insurance is raised in paragraph 4 for losses "outside this warranty," and "described" is the different sense of "covers" in paragraph 1.
Read the passage, then answer the question. Jonah Pratt's landscaping company had its best year ever, at least according to its books. Customers had signed contracts worth far more than the year before, and every finished job showed a healthy margin. Yet in August, Jonah could barely meet payroll. His accountant summed up the situation: the company was profitable on paper and nearly out of cash. The trouble was timing. Jonah paid his crew every Friday and paid for plants, stone, and mulch when he picked them up. His largest customers were property management firms that paid sixty days after receiving an invoice, and Jonah often sent invoices weeks after a job ended. His books, however, recorded each job as earned on the day the crew finished it, whether or not an invoice had gone out. Signed contracts for work not yet started did not count at all. The accountant stressed that this was not the same as a business that collects its money promptly and then spends it as fast as it comes in, or one whose books contain mistakes. Jonah's figures were accurate, and his customers were reliable. The money was real; it simply had not arrived. Jonah fixed the problem in three ways. He began asking new customers for a deposit before work started, he offered a small discount to those who paid within ten days, and he arranged a line of credit with his bank to cover gaps. In the accountant's sense, which business would also be "profitable on paper"?
- A.A firm holding deposits for jobs its crews have not yet started
- B.A firm whose crews have finished jobs it has not yet invoiced
- C.A firm holding signed contracts for new jobs it has not yet started
- D.A firm that is paid promptly and spends the money just as fast
Show answerHide answer
Correct answer: A firm whose crews have finished jobs it has not yet invoiced
Paragraph 2 says the books "recorded each job as earned on the day the crew finished it, whether or not an invoice had gone out," so a firm with finished but uninvoiced jobs shows earnings it has not collected, which is the accountant's meaning. The deposit firm is tempting because deposits are Jonah's fix, but it has cash for work that is not yet earned, the reverse of his problem. Signed contracts "did not count at all," and paragraph 3 rules out the firm that collects promptly and spends fast.
Read the passage, then answer the question. The first transcontinental railroad in the United States was built by two companies working toward each other. The Central Pacific started in Sacramento, California, and built east across the Sierra Nevada. The Union Pacific started near Omaha, Nebraska, and built west across the plains. The Central Pacific's crews spent years blasting tunnels through the granite of the Sierra Nevada, while the Union Pacific moved faster over open ground but depended on long supply lines for rails, ties, and fuel. Both companies relied on thousands of laborers, many of them immigrants from China and Ireland. Congress did not fix a meeting point in advance. Instead, the government gave each company loans in the form of bonds, plus grants of land, for every mile of track it completed, with larger loans for miles built through mountains than for miles across flat country. Before any bonds were issued, government inspectors graded each finished section of track, judging whether it met the required standard. Because every mile one company laid was a mile the other could not claim, the arrangement turned the project into a race. By early 1869, the race had grown wasteful. Grading crews from the two lines had passed each other in Utah and were cutting and filling the ground for side-by-side roadbeds, some of which would never carry a train. Congress finally settled the matter that spring by naming Promontory Summit, Utah, as the meeting place. On May 10, 1869, the rails were joined there, and a ceremonial golden spike marked the finish. Travel from coast to coast, which had taken months, could now be done in about a week. As it is used in the third paragraph, the word "grading" most nearly means
- A.judging finished work against a standard
- B.measuring how steeply the land rises
- C.leveling and shaping ground for a track
- D.sorting rock and soil by their size
Show answerHide answer
Correct answer: leveling and shaping ground for a track
In the third paragraph, the grading crews were "cutting and filling the ground for side-by-side roadbeds," so grading means leveling and shaping ground to carry a track. Judging work against a standard is how "graded" is used for the inspectors in the second paragraph, not the third, and measuring steepness fits the word's sense of slope but not crews who were preparing roadbeds.
Read the passage, then answer the question. The Brooklyn Bridge, which opened in 1883, was designed by John A. Roebling, an engineer known for his wire-cable suspension bridges. Before construction began, Roebling's foot was crushed in an accident while he was surveying the site, and he died of tetanus in 1869. His son Washington, also an engineer, took charge of the project. The bridge's towers rest on caissons, huge wooden chambers open at the bottom that were sunk into the riverbed. Workers dug inside them in compressed air, and many developed a painful illness after coming back to the surface too quickly. Washington Roebling was struck by it as well, and by 1872 he was too ill to visit the site. His chief assistant, C. C. Martin, directed the daily work there. For most of the next decade he followed the work through a telescope from his room in Brooklyn Heights. His wife, Emily Warren Roebling, carried his instructions to the engineers, and she studied the subject so closely that many came to treat her as an expert in her own right. In paragraph 3, who does the word "he" in the first sentence refer to?
- A.The engineer who first designed the bridge
- B.The assistant who directed the daily site work
- C.A caisson worker who fell ill from the work
- D.The son who had taken charge of the project
Show answerHide answer
Correct answer: The son who had taken charge of the project
Paragraph 2 says Washington Roebling was "too ill to visit the site," which is why "he followed the work through a telescope from his room," and paragraph 3 names his wife Emily as the one who carried his instructions. C. C. Martin is the nearest man named, but he "directed the daily work there," so he had no need to watch from a distance. The designer, John A. Roebling, had died in 1869.
Read the passage, then answer the question. Lithium-ion batteries power phones, laptops, power tools, and e-bikes, and they pack a great deal of energy into a small space. Most never cause trouble, but when one fails, the result can be dramatic. They are found in everything from toothbrushes to electric cars, so the risk is spread through ordinary homes. Trouble usually begins with damage inside a single cell. A dent from a fall, a manufacturing flaw, or charging with an unsuitable charger can let the two sides of the cell touch, creating an internal short circuit that heats the cell. Heat speeds up the chemical reactions inside, and those reactions themselves give off heat. If the cell cannot shed that heat fast enough, its temperature keeps climbing, which speeds the reactions further. This is thermal runaway, and once it has started it can be very hard to stop. In a pack that holds many cells, as e-bike and laptop batteries do, the heat from one failing cell can then trigger the same process in the cells beside it, so that a small failure spreads through the whole pack. Gas produced inside a failing cell can also make its case swell or burst. This is one reason fires in large packs can burn for a long time and may flare up again after they seem to be out. A battery that swells, becomes unusually hot, hisses, or gives off a sweet or chemical smell should be taken out of use. Fire services advise charging devices on hard surfaces away from anything that can burn, using the charger supplied by the maker, and never leaving e-bike batteries charging overnight in an escape route such as a hallway. Based on the passage, "thermal runaway" is best described as
- A.a rise in heat that feeds itself by speeding the reactions
- B.a rise in heat that begins when a dented cell shorts inside
- C.a rise in heat that spreads from one cell to the cells nearby
- D.a rise in heat that builds gas until the cell case swells
Show answerHide answer
Correct answer: a rise in heat that feeds itself by speeding the reactions
Paragraph 2 defines thermal runaway as the cycle in which heat "speeds up the chemical reactions" that "themselves give off heat," so the temperature "keeps climbing" because the heat feeds itself. An internal short from a dent is one way the trouble "begins," not the runaway itself. Spreading to nearby cells and gas swelling the case are consequences described separately in paragraph 3.
Read the passage, then answer the question. Apprentices in the Riverside Joint Training Program must remain in good standing to keep advancing. The handbook explains the term through three conditions rather than a single definition. An apprentice in good standing has paid all program fees on time, has attended at least 90 percent of scheduled classroom hours in the current term, and has no disciplinary matter pending before the committee. Each condition has a stated exception. A fee paid within ten days after its due date counts as on time, but only for the first late payment in a program year; a second late payment in the same year counts as late however quickly it is made. Classroom hours missed because of a documented job-site injury are counted as attended. The handbook is just as specific about discipline. A matter that has been heard and closed does not count against an apprentice, even if a written warning was issued. However, if an apprentice files an appeal of a closed matter, the matter is treated as pending again until the committee rules on the appeal. Grades are not part of good standing at all: an apprentice who fails a course must repeat it but keeps good standing if the three conditions are met. Losing good standing does not mean being removed from the program. It means the apprentice cannot advance to the next pay step, transfer to another training center, or enroll in elective courses until the problem is corrected. Apprentices who think their status has been recorded wrongly may ask the training coordinator to review it within thirty days. Assume each apprentice below meets every condition not mentioned. Based on how the handbook uses the term, which apprentice is NOT in good standing?
- A.Dana, who attended 86 percent and missed the rest with a documented injury
- B.Priya, who has appealed a written warning in a matter the committee closed
- C.Luis, who paid a fee six days late, his first late payment this program year
- D.Marcus, who failed a course this term and is repeating it in the next term
Show answerHide answer
Correct answer: Priya, who has appealed a written warning in a matter the committee closed
The third paragraph says a closed matter does not count, "however, if an apprentice files an appeal of a closed matter, the matter is treated as pending again," and a pending matter breaks the third condition. Dana's injury hours are "counted as attended," Luis's first late payment within ten days "counts as on time," and grades "are not part of good standing at all," so each of the other three looks like a violation but is not one.
Read the passage, then answer the question. Car batteries fail more often in winter than in any other season, and the reasons work together. A cold engine is harder to turn over, because the oil thickens in low temperatures and the moving parts resist the starter. Many drivers notice the difference as a slow, labored sound in the first seconds after they turn the key. It helps to know what happens when the key is turned. The starter, a small electric motor powered by the battery, spins the engine so that its pistons begin moving. Only when fuel begins burning in the cylinders does the engine catch and run on its own, and at that point the starter disengages. In deep cold the starter may have to spin the engine for several seconds, or through several tries, before that happens, and every second of spinning draws heavily on the battery. At the same time, cold slows the chemical reactions that let the battery produce current, so a fully charged battery delivers noticeably less on a cold morning than it can at mild temperatures. On a cold morning, then, the battery is asked to do more with less. Winter driving habits can add to the strain. Once the engine is running, the alternator carries most of the load from heaters and headlights and also recharges the battery, but short trips may not run it long enough to replace what starting used up. An older battery also begins each winter with less in reserve, so mechanics often suggest having one tested before the cold arrives. The test takes only a few minutes at most garages and auto parts stores. As it is used in paragraph 1, "turn over" most nearly means
- A.start and keep running on its own fuel
- B.warm up enough to be driven away safely
- C.spin with the starter so the pistons move
- D.hand its load over to the alternator
Show answerHide answer
Correct answer: spin with the starter so the pistons move
Paragraph 1 says the cold engine is harder to turn over because its parts "resist the starter," and paragraph 2 explains that the starter "spins the engine so that its pistons begin moving" before the engine will "catch and run on its own." So turning over is the spinning, not the running. Starting and running on its own fuel is the everyday sense many drivers use, but the passage treats that as the later step that may take "several tries."
Read the passage, then answer the question. A blower door test measures how leaky a house is. A technician mounts a large fan in an exterior doorway, runs it until the house is held at a fixed, strong pressure difference, and measures how much outside air pours in through cracks and gaps. The result is reported in air changes per hour: a reading of 9 means that, with the fan running, the whole volume of indoor air would be replaced nine times an hour. That figure is not the house's everyday leakage. On an ordinary day, with no fan pulling on it, the same house lets in only a small fraction of that amount; the strong test pressure is used so that different houses can be compared fairly. For the comparison to be fair, the program requires every test to be run with windows latched and the fireplace damper closed. An open damper adds a large hole the house does not normally have, so it makes the reading higher than it should be. Our first test at the Pruitt house, built in 1931, read 9, which put it below the program's high-priority line of anything above 10. Only afterward did the crew notice that the fireplace damper had been left open. The crew did not retest; it went ahead and sealed the attic hatch and the rim joists. The follow-up test, run with the damper closed, read 6. The program's goal for homes built before 1940 is 5, which older houses usually reach only when the basement walls are sealed as well. From now on, check the damper and every window before the first test, not after. A first reading taken the wrong way cannot be fixed later, and without a trustworthy starting number we cannot show the program how much a job accomplished. Based on how the passage explains the test reading, which statement about the Pruitt house must be true?
- A.The sealing work cut its leakage under test pressure by one third
- B.A proper first test would have placed it on the high-priority list
- C.Its indoor air is now replaced about six times an hour on most days
- D.Its first reading overstated the leakage a proper test would show
Show answerHide answer
Correct answer: Its first reading overstated the leakage a proper test would show
Paragraph 2 says an open damper "makes the reading higher than it should be," and paragraph 3 says the first test was run with the damper open, so the first reading of 9 overstated the house's true test leakage. The one-third cut (9 to 6) is the tempting arithmetic, but because the true starting figure was below 9, the real cut was smaller and cannot be confirmed. The everyday option ignores the warning that the figure "is not the house's everyday leakage," and a proper first test would have read even lower than 9, further from the line of 10.
Read the passage, then answer the question. In 1998 the city of Millbrook signed a concession agreement with Harbor Light Rentals for the old boathouse in Riverside Park. The company would repair the building and run boat rentals on the lake, keeping the income; in return it would pay the city a yearly fee and hand the building back in good condition when the term ended. The city kept ownership of the boathouse and the land under it throughout. The arrangement worked well for twenty years, but the renewal talks in 2018 were difficult. The company wanted a fifteen-year term so that it could afford to build a new dock. Council members, hearing complaints that a family boat ride had become too expensive, wanted prices held down. A deal came only after a concession on the company's part: it agreed to freeze the price of an hour's rental for the first five years of the new term, in exchange for the longer term it had asked for. The new agreement also let the company open a concession at the foot of the dock, selling cold drinks, snacks, and bait. Income from the stand now covers most of the dock's upkeep. Seniors and children under twelve, as before, rent boats at a reduced rate set by the city. Not everyone is pleased. Some residents argue that a public lake should not be run for profit at all, and the council has promised to review the arrangement again before the term ends. Others point out that the city could not have afforded the new dock on its own, and that the rental fee it collects each year now pays for a summer lifeguard at the swimming beach. As it is used in paragraph 2, the word "concession" most nearly means
- A.something one side gives up to the other to reach agreement
- B.a right to run a business on public land and keep its income
- C.a lower price that is set for one particular group of renters
- D.a stand that sells food and drinks to visitors at a public site
Show answerHide answer
Correct answer: something one side gives up to the other to reach agreement
In paragraph 2 the company agreed to freeze its prices "in exchange for the longer term it had asked for," so the concession is something one side gives up to reach agreement. The price-related option is tempting because the concession involved prices, but the freeze applies to every renter, and the reduced rate for seniors and children is set by the city in paragraph 3. The right to run a business is the sense in paragraph 1, and the food stand is the sense in paragraph 3.
Read the passage, then answer the question. Before leaving the yard, the Renter and a Westfield Rentals employee must walk around the equipment and inspect it together. Any scratches, dents, missing parts, or leaks are written on the checkout form, and both people initial each entry. An entry missing either set of initials does not count as recorded. Renters may also photograph the equipment, and the branch will add the photos to the rental file, but only the initialed form is used when the equipment comes back. Damage not recorded on the form will be treated as having happened during the rental, and the Renter will be billed for the repair. There is one exception. If the Renter finds a problem after reaching the job site, the Renter must stop using the equipment and call the branch the same day. A problem reported that way is noted in the rental file and is not billed to the Renter unless it was caused by misuse. A Renter who keeps running a machine after finding a problem, even one reported the same day, will be billed for any damage beyond what was there when the problem was found, since continued use can turn a small repair into a large one. When the equipment comes back, it is inspected again and the findings are written on a return report, which is compared with the checkout form before the deposit is released. Equipment returned with less fuel than it had at pickup is refueled at the posted rate. The branch can usually send a replacement unit within one business day. Any charge for damage is taken first from the deposit, and the Renter is billed separately for any amount the deposit does not cover. Renters who disagree with a charge may ask the branch manager to review the checkout form, the return report, and the rental file together within ten days. Under these rules, which renter would owe nothing for the damage described?
- A.One whose dent was written on the form and initialed by the employee only
- B.One who found a leaking hose on site, shut it off, and called that night
- C.One who reported a leak at once but kept digging as the leak grew worse
- D.One who found a cracked guard at the site, stopped, and called next day
Show answerHide answer
Correct answer: One who found a leaking hose on site, shut it off, and called that night
Paragraph 3 says a renter who stops using the equipment and calls "the same day" is "not billed" unless there was misuse, so the renter who shut off the machine and called that night owes nothing. The renter who reported at once is tempting, but because the digging went on, that renter is billed for damage "beyond what was there when the problem was found." A dent initialed by the employee only "does not count as recorded," and a call the next day misses the same-day condition.
Read the passage, then answer the question. When Rosa Delgado started her house-painting business, she priced each job by adding up paint and labor and charging a little more. Two years later she was busy every week and still barely breaking even. A small-business adviser told her that every price has to cover three things. Direct costs are tied to one particular job: the paint used on that house, the wages for the hours painters spend there, and anything bought or rented only because that job exists. Overhead is what the business would still pay in a month with no jobs at all, such as insurance on the van, the phone bill, and the rent on the unit where her ladders are stored. Profit, added last, is what the business is meant to earn for its owner. Several costs did not sort themselves neatly. Rosa's two painters are on salary and are paid every week whether or not there is work. The adviser charged each job only for the hours the painters actually spent on it; the paid hours left over, such as rain days and afternoons spent cleaning gear at the shop, went into overhead. A paint sprayer she had bought for one large job, and has used on nearly every job since, was moved into overhead as well, because it no longer exists for any single job. The fuel her van burns, on the other hand, stayed direct, since she buys it only when the crew drives out to a site. Rosa's prices rose by about fifteen percent. She lost a few bargain hunters, but by the end of the next year the business was making money. Based on the passage, which of these costs would the adviser count as "overhead" for Rosa's company?
- A.the extra insurance one commercial client required for its building
- B.the rent on a sprayer brought in for a week to coat one warehouse
- C.the painters' pay for a rainy week when no house could be painted
- D.the fuel the van burns carrying the crew out to a distant job site
Show answerHide answer
Correct answer: the painters' pay for a rainy week when no house could be painted
Paragraph 3 says the painters' paid hours not spent on any job, "such as rain days," went into overhead, so their pay for a rained-out week is overhead. The rented sprayer is the tempting choice because Rosa's own sprayer was moved to overhead, but hers was used on nearly every job, while a sprayer rented for one warehouse is "rented only because that job exists" and stays direct. The client-required insurance exists only because of that one job, and fuel "stayed direct."
Read the passage, then answer the question. Anyone who has pulled an old battery from a drawer has met the problem: a battery can lose charge even when it is doing nothing. Engineers separate several causes, because each calls for a different fix. The first is self-discharge. Slow chemical reactions inside every battery use up part of its stored charge even when nothing at all is connected to it. The rate depends on the battery's chemistry and especially on temperature; a battery kept somewhere hot loses charge noticeably faster than one kept somewhere cool. Chemistries also differ widely: some rechargeable types lose a noticeable share of their charge within a month on a shelf, while many single-use batteries keep most of theirs for years. Charge lost this way comes back in full when a rechargeable battery is charged again. The second is standby drain. Many devices that look switched off still draw a small current to keep a clock, a memory, or a remote-control sensor running, so a battery left inside them empties sooner than one on a shelf. Removing the battery stops this loss, which is why manuals for seldom-used devices often suggest it. Two other effects are often confused with these. Cold makes a battery deliver less power while it stays cold, but the stored charge has not gone anywhere, and full power returns once the battery warms. Aging is different again. Over hundreds of charge cycles, a rechargeable battery gradually loses capacity: even when fully charged, it holds less than it did when new, and recharging cannot restore what was lost. For long storage, makers generally advise a cool, dry place. Which situation would the passage describe as self-discharge?
- A.A drill battery stored after use holds less when fully charged than it did new
- B.A charged battery left in an unheated garage runs a drill weakly in January
- C.A battery left inside a drill with a lit charge gauge is weaker by the fall
- D.A battery taken out of a drill and left in a hot shed is weaker by the fall
Show answerHide answer
Correct answer: A battery taken out of a drill and left in a hot shed is weaker by the fall
Self-discharge is charge lost "even when nothing at all is connected," and it runs faster "somewhere hot," so a battery taken out of the drill and left in a hot shed fits exactly. The battery that holds less even when fully charged is aging, since recharging "cannot restore" that loss. The cold-garage battery has only the temporary cold effect, and the battery left in a drill with a lit gauge is standby drain from a device that is still drawing current.
Read the passage, then answer the question. For much of the twentieth century, wetlands were treated as wasted land, and many were drained for crops, roads, and houses. Scientists now see them differently, partly because of what happens to the materials that wash into them. Ecologists sort places by what happens to a material over time. A place that releases more of a material than it takes in is a source. A place that takes in a material but holds it only until conditions change, then lets it go again, is a store. Scientists reserve the word sink for a place that takes in more of a material than it releases and keeps what it takes in out of circulation, either by burying it for good or by changing it into something else. A marsh plays different roles for different materials. Soil washing off fields settles among the reeds, but a large flood can stir up that mud and carry it downstream after all, so for soil a marsh is only a store. Phosphorus from fertilizer behaves much the same way: it clings to settled mud and can be released when the marsh dries out. Much of the nitrogen in fertilizer, however, never leaves. Plants take up some of it, and bacteria in the waterlogged soil turn much of the rest into a harmless gas that escapes into the air. For nitrogen, a healthy marsh is a sink. Towns downstream feel the difference when marshes are drained, because their water treatment plants must remove more nitrogen. Several now pay farmers upstream to restore marshes, having found that this costs less than expanding a plant. As scientists use the word "sink" in the passage, which of the following would be a sink for the material it takes in?
- A.A seafloor where settling shells are buried under new mud for ages
- B.A reservoir that holds spring runoff and lets it all out by late summer
- C.A pond whose mud holds metals until a strong flood stirs them loose
- D.A field that sends more nitrogen into streams than its fertilizer adds
Show answerHide answer
Correct answer: A seafloor where settling shells are buried under new mud for ages
Paragraph 2 reserves "sink" for a place that takes in more than it releases and keeps the material out of circulation, "either by burying it for good or by changing it into something else," which fits a seafloor that buries shells under new mud. The pond is the tempting choice because it holds the metals, but holding a material "only until conditions change, then lets it go again" is what the passage calls a store. The reservoir is also a store (and the everyday basin sense of sink), and the field releases more than it takes in, which makes it a source.
Read the passage, then answer the question. Many wild bees time their lives to the flowers they feed on. A mining bee may spend most of the year underground and come out in spring for only a few weeks, during which it gathers the pollen and nectar it needs to stock its nest. If the flowers it relies on are not open during those weeks, the bee has little else to eat. Bees and flowers take their cues from the world around them, but not always the same cues. Many plants respond mainly to air temperature, while some bees respond more to soil temperature or day length. As springs have grown warmer, some flowers now open earlier than they did a few decades ago, before the bees that visit them have come out. Researchers worry that this mismatch, now several days in some regions, could reduce both bee numbers and seed production. Gardeners often ask what they can do. Nothing in a garden changes when a given plant opens or when a given bee comes out, so planting cannot stop a mismatch from happening. A garden of native species that bloom early, in midseason, and late is instead a hedge against it: whenever the bees are out, something is likely to be in flower, so a bee whose usual plant has finished still has food nearby. Advisers suggest grouping plants of each kind so that bees can find them easily. Scientists stress that the long-term picture is still unclear. Counts of bees and flowers kept in the same places over many years will be needed to learn how serious the problem is and which species are most at risk. As it is used in paragraph 3, the word "hedge" most nearly means
- A.a barrier that keeps a problem from starting at all
- B.a way to limit the harm that a risk can do
- C.a way to avoid giving a plain, direct answer
- D.a row of shrubs planted along a garden edge
Show answerHide answer
Correct answer: a way to limit the harm that a risk can do
Paragraph 3 says planting "cannot stop a mismatch from happening" but makes sure a bee whose usual plant has finished "still has food nearby," so a hedge here is a way to limit the harm a risk can do. A barrier that keeps the problem from starting is tempting, but that is exactly what the paragraph says planting cannot do. The row of shrubs is the everyday garden sense, and avoiding a direct answer is the sense of hedging in speech.
Read the passage, then answer the question. Electricity has an awkward feature: most of it must be used the instant it is produced. Power plants therefore raise and lower their output minute by minute to match demand, which climbs when people wake up, peaks on hot afternoons, and falls overnight. A gas-fired or hydroelectric plant can be told the day before to deliver a set amount at six in the evening, and, barring a breakdown, it will. Grid planners call that kind of supply firm. A firm plant's output still rises and falls through the day; it may run at half speed in the morning and at full speed at dinnertime. Wind and solar farms, which burn no fuel at all, are not firm in this sense. A passing bank of clouds can cut a solar farm's output sharply within minutes, and the wind can drop just as people get home and switch on ovens and air conditioners. Large battery installations, some the size of a warehouse, are increasingly built to help. When production runs ahead of demand, they charge; when demand jumps or production dips, they discharge, and they can switch between the two in a fraction of a second. Pairing a solar farm with batteries lets its owner commit to a set amount of power for an evening hour, which the farm alone could not do. Most such batteries can supply power for only a few hours, so they cannot carry a region through a long calm, cloudy spell. Their value lies in covering the short, sharp gaps that would otherwise force a plant to ramp up in a hurry. As used in paragraph 2, the word "firm" most nearly means
- A.steady, holding a single level of output all through the day
- B.clean, produced without burning coal, gas, or any other fuel
- C.reliable, able to deliver a set amount of power when scheduled
- D.stored, kept in reserve until demand rises and calls for it
Show answerHide answer
Correct answer: reliable, able to deliver a set amount of power when scheduled
Paragraph 1 describes the plant that can be told the day before to deliver a set amount at six and will, and paragraph 3 says batteries let a solar farm commit to a set amount for an evening hour, so firm means reliable, able to deliver a set amount of power when scheduled. Steady fails because paragraph 2 says a firm plant's output still rises and falls through the day. Clean fails because wind and solar burn no fuel yet are not firm, and stored describes what the batteries do, not the quality the word names.
Read the passage, then answer the question. Over the last decade, a growing number of school districts have put solar panels on their roofs. School buildings are good candidates. Their roofs are large and flat, they use most of their power during daylight hours, when panels produce it, and districts tend to own them for decades, long enough for the panels to repay their cost. A state energy office survey found that the typical school uses about 70 percent of its electricity between 7 a.m. and 4 p.m. The Fairview district installed panels on four of its nine schools six years ago; the other five had roofs that were too old or too shaded. According to the district's annual reports, the panels now supply about a third of the electricity those four buildings use, and the savings have helped pay for two reading teachers. On cloudy winter weeks, the reports note, output drops to a small fraction of the summer level, and the district buys more power from the utility to make up the difference. Not every board member was convinced at first. Two argued that the money would do more good spent on aging buses, and one of them still says so. The district's reply has been that the panels pay for themselves over time, while buses do not. The board has since set up a separate fund for buses. Not every district will see Fairview's results. Older roofs may need repairs before panels can go up, which adds to the cost, and schools in cloudy regions will produce less power. Still, given how well school buildings match the way solar power works, districts that have not studied the idea are leaving money on the table. Which statement about the Fairview district is best supported by the passage?
- A.Fairview's panels supply about a third of all the power the district's schools use
- B.Fairview's panels have already paid back the district's full cost of installing them
- C.Fairview's panel savings now pay for the district's separate fund for school buses
- D.Fairview's panels supply less than a third of all the power its schools use
Show answerHide answer
Correct answer: Fairview's panels supply less than a third of all the power its schools use
The second paragraph says the panels sit on only "four of its nine schools" and supply "about a third of the electricity those four buildings use," so across all nine schools they must supply less than a third. The "about a third of all the power" option drops the words "those four buildings" and applies the figure to the whole district. The district only claims the panels "pay for themselves over time," which does not say the full cost has been repaid, and the passage never says where the bus fund's money comes from.
Read the passage, then answer the question. Each apprentice in the Tri-County program must complete 8,000 hours of on-the-job training before reaching journey-level status. Those hours are not all alike. The program divides the trade's work into six categories, from site layout and material handling to installation, repair, and inspection, and it sets a minimum number of hours for each one. Apprentices record their hours on a weekly log, listing the category of each day's work. The contractor's foreman signs each log, and the apprentice turns it in to the training office every month. The training committee also moves each apprentice among several contractors over the course of the program, so that no one spends all four years with a single company that does only one kind of job. The committee explains the purpose of the system in its handbook: "Because no one may graduate without meeting the minimum in every category, every graduate of this program will have practiced the full range of the trade." The committee's conclusion about what every graduate will have practiced depends on which assumption?
- A.The category written on each log matches the work actually done that day.
- B.Every contractor in the program does work in all six of the trade's categories.
- C.Classroom study covers the same skills as the hours spent on the job.
- D.Apprentices learn the most from the categories of work they like best.
Show answerHide answer
Correct answer: The category written on each log matches the work actually done that day.
The conclusion rests on the logs: a graduate has "practiced the full range" only if hours recorded under a category were really spent on that kind of work. Contractors do not each need to cover all six categories, because the committee "moves each apprentice among several contractors" for exactly that reason.
Read the passage, then answer the question. To: All employees From: Lena Brooks, Safety Director Re: Reporting near misses A near miss is an event that could have hurt someone but did not: a dropped tool that lands a foot from a coworker, a ladder that slips but is caught. Safety researchers have long found that serious injuries tend to follow many earlier near misses with the same cause. Each one is a free warning, and we are wasting most of them. Last year our crews filed only six near-miss reports, though our crews work more than three hundred thousand hours a year. I am convinced the reason is simple. People worry that reporting a near miss will get them or a coworker in trouble, and two years ago two workers were in fact written up after reporting near misses they had caused. So, effective today, no employee will be disciplined for reporting a near miss, including one they caused, unless it involved deliberate rule-breaking. Reports can be made on the paper form in each trailer or by calling the safety line. Some supervisors have told me they doubt the change will matter, since most of our crews are experienced and near misses are rare among them. I disagree. Experienced workers have near misses too; they are simply better at shrugging them off. This policy does not change the safety rules themselves; deliberate rule-breaking will still be handled as it always has been. Once people trust that reporting is safe, I expect reports to rise sharply, and I expect our injury numbers to fall as we fix the causes we learn about. Which finding, if true, would most seriously weaken the safety director's reasoning?
- A.Firms that adopted similar policies saw reports rise only after about a full year.
- B.Crews that never saw anyone written up filed reports as rarely as the others.
- C.Our injury numbers fell last year even though so few reports were filed then.
- D.Experienced workers here have near misses about as often as newer ones do.
Show answerHide answer
Correct answer: Crews that never saw anyone written up filed reports as rarely as the others.
The director's plan rests on one cause: workers skip reports because they fear discipline. If crews that never saw anyone disciplined reported just as rarely, fear is not what keeps reports low, and removing discipline should not change much. A slow rise at other firms still supports her prediction, last year's falling injuries say nothing about why reports are rare, and experienced workers having as many near misses as new ones actually backs her reply to the doubting supervisors.
Read the passage, then answer the question. Every water system loses some treated water before it reaches a customer's meter. In Carver City, last year's audit put the loss at about one gallon in six, and most of it is believed to leak from the 180 miles of iron mains laid before 1960. The utility board is weighing a leak-detection program. Crews would walk the iron mains with listening devices that pick up the faint hiss of escaping water, find leaks before they surface, and repair them on a planned schedule. The devices work poorly on the plastic mains laid since 1990, so the program's first five years would cover only the iron mains. Last spring the board ran a pilot on twelve miles of iron main in the Eastgate district, chosen because the crews' yard is nearby. Crews found an average of four hidden leaks per mile, fewer than the six per mile the program's backers had first predicted. Supporters then rebuilt their estimate on the pilot's actual result, assuming four leaks per mile across all 180 miles, each repaired before it could grow into a break. On that basis, supporters say the program would pay for itself within five years. A single break can flood a street, close it for days, and cost far more to fix than a planned repair. Critics reply that the savings depend on how many leaks the crews actually find, and they would rather spend the first year's money replacing the worst stretches of main outright. The board expects to vote on the program in the fall, after a public hearing. Which finding, if true, would most weaken the supporters' estimate?
- A.Listening devices find few leaks on the city's newer plastic mains
- B.The pilot turned up fewer leaks per mile than backers first expected
- C.Eastgate's iron mains break more often than any others in the city
- D.A break costs the city several times as much as a planned repair
Show answerHide answer
Correct answer: Eastgate's iron mains break more often than any others in the city
Supporters apply the pilot's four leaks per mile to "all 180 miles," so if Eastgate's mains break more often than any others, the pilot probably overstates the leaks waiting on the rest of the system and the estimate is too high. The low pilot count is the tempting choice, but paragraph 3 says the estimate was already "rebuilt" on that actual result. Plastic mains fall outside the first five years, and costlier breaks make planned repairs worth more, which supports the estimate.
Read the passage, then answer the question. Trenches are among the most dangerous places on a construction site. Walls that look firm can give way without warning, especially after rain or when heavy equipment works nearby. A single cubic yard of soil can weigh well over a ton, and a worker caught in even a partial collapse may be pinned too tightly to breathe long before rescuers can dig him out. For this reason, the company requires a protective system in any trench five feet deep or more, unless the trench is cut entirely in stable rock. Trenches shallower than five feet are not exempt by default. In them, the competent person on site looks at the soil and the walls and decides whether protection is needed. That person must require it whenever there are signs that a wall could fail, such as cracks along the edge or water seeping from the face. Where no such signs appear and the competent person judges the walls sound, a shallow trench may be worked without a protective system. Crews may protect a trench in one of three ways: by sloping the walls back at a safe angle, by cutting them into a series of steps, called benching, or by setting a trench box, a steel frame that holds the walls in place while people work inside it. The right choice depends on the soil, which the competent person classifies before work begins. Benching is not allowed in loose, sandy soil, because the edges of the steps crumble. Ladders must be placed within 25 feet of every worker in a trench four feet deep or more. Spoil piles, the soil dug out of the trench, must sit at least two feet back from the edge, and the competent person must inspect each trench at the start of every shift and again after any rainstorm. Which trench, as described, meets every company rule on protective systems and ladders?
- A.A five-foot clay trench the competent person judged sound, left unshored, ladder 20 feet away
- B.A six-foot sandy trench the competent person had cut into benches, ladder 20 feet away
- C.A six-foot sandy trench the competent person had sloped back safely, ladder 30 feet away
- D.A four-foot clay trench the competent person judged sound, left unshored, ladder 20 feet off
Show answerHide answer
Correct answer: A four-foot clay trench the competent person judged sound, left unshored, ladder 20 feet off
The second paragraph lets a trench under five feet go without protection when the competent person finds no warning signs and "judges the walls sound," and a 20-foot ladder is within the 25-foot limit, so the four-foot clay trench meets every rule. The five-foot clay trench fails even though it was judged sound, because protection is required at "five feet deep or more" unless the trench is "cut entirely in stable rock." The benched sandy trench breaks the rule that benching "is not allowed in loose, sandy soil," and the sloped sandy trench is protected properly but its ladder is more than 25 feet away.
Read the passage, then answer the question. Ask people what a water tower is for, and many will say it is a backup supply: a tank of water that sits waiting in case something goes wrong at the treatment plant. The belief is common enough that some towns describe their towers that way on their own websites. The tower's main daily job is something else. It keeps water pressure steady. Because the tank sits high above the homes it serves, the weight of the water pushes down through the pipes and out of every faucet below. Each foot of height adds a little less than half a pound per square inch of pressure, so a tank that sits 100 feet above a neighborhood supplies roughly 43 pounds. The tower also lets a city get by with smaller pumps. Demand for water peaks in the morning, when many people shower at once, and again in the evening. Instead of buying pumps big enough to meet those peaks directly, a utility pumps at a steady rate, often overnight when power is cheaper, to fill the tank. During the peaks, the tower drains down to make up the difference, and the pumps refill it once demand falls again. Utilities do count on the stored water when a main breaks or a pump fails, and fire departments may draw a great deal of it at once. Engineers who design a new tower set aside part of its volume for such events. Still, a tower that served only as a reserve could be built at ground level. The reason it is lifted into the air, at considerable cost, is pressure. The first paragraph mainly serves to
- A.present a popular view that the passage later ranks below the tower's main daily job
- B.present a popular view that the passage later shows to be entirely mistaken
- C.present a popular view that the passage later confirms as the tower's main job
- D.present an expert view that the passage later develops into its central claim
Show answerHide answer
Correct answer: present a popular view that the passage later ranks below the tower's main daily job
The last paragraph grants that utilities "do count on the stored water" and that engineers reserve volume for emergencies, but says the tower is raised because of "pressure," the "main daily job" named in the second paragraph. So the backup view is kept as a lesser role, not shown to be "entirely mistaken," which is the tempting overstatement; and the view is attributed to what "many will say," not to experts.
Read the passage, then answer the question. At last month's shop meeting, our foreman, Dale Ortiz, proposed changing how we handle the yearly tool order. Each January we spend about 9,000 dollars replacing hand tools, and Dale believes most of that money goes to tools we ruin ourselves. His evidence comes from the retirement log, where every tool pulled from service is listed with a reason. Of the 140 tools retired last year, about seven in ten were marked "rust" or "seized joint." Rust needs bare metal, air, and moisture, Dale points out, and a tool wiped dry, given a few drops of light oil, and stored off the floor rusts very slowly. The other retirements were for breaks, normal wear, and tools that simply went missing. Dale's plan is simple: two minutes of cleaning at the end of every shift, a dry cabinet for each crew, and a quick check by the crew lead on Fridays. Each crew's cabinet would be bolted inside its gang box, away from the open truck beds where many of our tools now ride from job to job. Supplies would cost less than 200 dollars a year. He predicts that within a year the plan will cut our tool spending by more than half. Several people raised fair concerns. Two minutes per person adds up across a crew, and a few workers said they already wipe their tools most nights. But nobody argued with the main point: we are throwing away tools that could have lasted for years. Dale has asked to try the plan with two crews this spring before the shop decides whether to adopt it for everyone, and he will report the results at the June meeting. Which finding, if true, would most seriously weaken Dale's prediction?
- A.Cleaning supplies for the plan would cost about 400 dollars a year
- B.The rusted tools were mostly cheap ones worth little of the 9,000
- C.Cleaning would take most workers nearer five minutes than two
- D.A few workers who wipe their tools nightly still had one rust
Show answerHide answer
Correct answer: The rusted tools were mostly cheap ones worth little of the 9,000
Dale counts retirements by number (seven in ten of 140 tools) but predicts a cut in spending of more than half; if the rusted tools were mostly cheap ones worth little of the 9,000 dollars, preventing their rust could not halve spending. Longer cleaning time is the tempting choice, but it is a labor cost, and the prediction is about tool spending. A 400-dollar supply bill is still tiny against 9,000 dollars, and one rusted tool among a few careful workers barely touches the prediction.
Read the passage, then answer the question. To: Installation crews From: Priya Shah, Operations Manager Re: Start times Our crews are scheduled to be on site and working at 7:00 a.m. Over the last quarter, time sheets show that the first crew member usually arrived on time, but the full crew was not ready to work until 7:25 on average. Until the last person arrives, the others mostly wait, because the lift cannot be set up safely short-handed. With five-person crews, those twenty-five minutes add up to about two hours of paid labor per crew each day, or roughly ten hours a week. That figure does not include the fifteen minutes it then takes to set up the lift, which we would spend in any case. Several crew leads have pointed out that the early arrivals are not always idle; some use the time to unload materials. That is fair, and it means the true loss may be somewhat smaller than my estimate. But unloading usually takes a few minutes, not twenty-five. I also believe late starts hurt morale. Nobody likes standing around waiting for the last person. One of our longtime customers mentioned last month that our trucks seemed to arrive "in pieces," and I would rather we were known for arriving together. Arriving in pieces also makes us look less organized to the general contractors who hire us. Starting next week, the crew lead will record each person's arrival time. Anyone running late should call or text the crew lead before 7:00. I will review the numbers with each crew lead at the end of the month. The memo's estimate that late starts cost about ten hours of paid labor a week rests mainly on
- A.the minutes each person arrived late on average, added up across the whole crew
- B.the minutes lost each morning while crews set up the lift before starting
- C.the minutes a crew waited for its last member, charged to all five people
- D.the arrival times each crew lead will begin to record for every person
Show answerHide answer
Correct answer: the minutes a crew waited for its last member, charged to all five people
The memo takes the 25 minutes until the "full crew" was ready and charges them to all five people (about 125 minutes, or two hours a day, times five days). It does not use each person's average lateness; the first member "usually arrived on time," so the people waiting were not late. The lift setup time is expressly left out ("does not include the fifteen minutes"), and the crew leads' records start only next week.
Read the passage, then answer the question. A thunderstorm cloud is a tall, churning column of air. Inside it, rising currents carry water droplets upward, where they freeze. Small ice crystals moving up collide with heavier pellets of soft hail falling down, and each collision moves a little electric charge from one particle to the other. Over time the top of the cloud tends to become positively charged and the lower part negatively charged. The simplest way to picture the result is as a giant battery with its two ends stacked one above the other. When the difference in charge grows large enough, the air can no longer keep the two apart, and a spark jumps across. Most lightning never reaches the ground at all; it flashes within the cloud or between clouds. When a bolt does strike, its channel can briefly become hotter than the surface of the sun. The heated air expands so quickly that it produces a shock wave, which we hear as thunder. Because light travels far faster than sound, we see the flash before we hear the rumble, and counting the seconds between them gives a rough idea of how far away the strike was. Which statement from the passage expresses an opinion rather than a fact?
- A.A lightning channel can briefly become hotter than the surface of the sun.
- B.Most lightning never reaches the ground and flashes within or between clouds.
- C.Counting seconds between flash and thunder gives a rough idea of distance.
- D.The simplest way to picture the charged cloud is as a giant battery.
Show answerHide answer
Correct answer: The simplest way to picture the charged cloud is as a giant battery.
Calling the battery picture "the simplest way" is the author's judgment about how to explain the charged cloud; another writer could prefer a different picture. The claim that a lightning channel can briefly become hotter than the surface of the sun sounds like exaggeration, but it is a measurable physical fact, as are the statements about where most lightning flashes and about counting seconds to judge distance.
Read the passage, then answer the question. On warm summer nights, people sometimes see silent flashes on the horizon and call them "heat lightning." The name suggests that hot air alone can make the sky flicker, with no storm involved. Meteorologists explain the flashes differently. In their view, heat lightning is ordinary lightning from a thunderstorm too far away for its thunder to be heard. The explanation fits what we know about sound. Thunder usually fades out within about ten miles, while the light from a flash can be seen much farther away, especially at night when the sky is dark and a storm's tall cloud tops catch the light. A person standing under a clear sky could therefore see a storm's flashes while hearing nothing at all. The name has lasted because it matches people's experience. The flashes do tend to come on hot evenings, which are exactly the conditions in which thunderstorms form. The heat is a clue to the storm, not a separate cause of the light. Which observation, if true, would most weaken the explanation that meteorologists give for heat lightning?
- A.Radar shows no storm close enough for its flashes to reach the viewer.
- B.Silent flashes are seen most often on hot and humid summer evenings.
- C.Viewers who drive toward the silent flashes soon begin to hear thunder.
- D.Thunder from a nearby strike is rarely heard beyond about ten miles.
Show answerHide answer
Correct answer: Radar shows no storm close enough for its flashes to reach the viewer.
The meteorologists say the flashes come from "a thunderstorm too far away for its thunder to be heard." If radar showed no storm near enough for its light to be seen, the flashes would need some other cause. Flashes on hot evenings fit the explanation, because the passage says those are "exactly the conditions in which thunderstorms form."
Read the passage, then answer the question. A solar panel turns sunlight directly into electricity. Most panels are built from many small cells, usually made of silicon, wired together under a sheet of glass. When light strikes a cell, it knocks loose tiny charged particles, and the panel's wiring collects them as an electric current. Because a panel has no moving parts, it can last for decades with little upkeep. On a house, several panels are usually wired together, and a box called an inverter changes their output into the kind of current household outlets supply. How much power a panel makes depends on how much light reaches its cells. Output is highest under a clear sky, where it climbs through the morning, peaks around midday, and falls off in the afternoon. It drops under heavy clouds and stops at night. Panels also work somewhat less efficiently when they get very hot, which surprises people who assume that hotter means better. Shade is a special problem. In many panels the cells are wired in a chain, so a shadow from a chimney, a tree limb, or a neighbor's roof that falls across only a few cells can pull down the output of a much larger part of the panel. Newer designs reduce this loss, but they do not remove it. For a homeowner deciding whether to install panels, I would argue that the roof usually matters more than the climate. A roof that faces the sun all day without shade, even in a fairly cloudy region, may do better than a shaded roof in a sunny one. Before asking how much sun your town gets, ask how much of it actually reaches your shingles. The author's advice in the final paragraph depends on which assumption?
- A.The loss from heat in a sunny town can be larger than the gain from extra sunlight
- B.The loss from shade can be larger than the loss from being in a cloudier climate
- C.Panels in a cloudy town can make about as much power as panels in a sunny town
- D.Newer panel designs can remove nearly all of the loss that shade on a roof causes
Show answerHide answer
Correct answer: The loss from shade can be larger than the loss from being in a cloudier climate
The author claims an open roof in a cloudy region "may do better than a shaded roof in a sunny one," which can only be true if what shade takes away can exceed what a cloudier sky takes away. The heat option would help the author's case but is not needed, since the passage says heat makes panels only "somewhat less" efficient and never weighs it against sunshine. The cloudy-town option claims far more than the argument requires, and the newer-designs option contradicts the passage, which says they reduce the loss "but they do not remove it."
Read the passage, then answer the question. Every summer, workers on job sites collapse from heat illness, and many of those cases could have been prevented by a simple routine of water, rest, and shade. Most crews already know the advice. The trouble lies in how it is put into practice, and in who is expected to act on it when the temperature climbs. On many sites, breaks in the heat are left up to each worker. Anyone who feels unwell is told to speak up and take a rest. This sounds reasonable, but it tends to fail for two reasons. First, heat illness affects thinking: a worker who is overheating may become confused and not notice that anything is wrong. Second, few people want to be the first on a crew to stop, especially if they are new and eager to prove themselves. New workers are also the ones most at risk, because their bodies have not yet adjusted to working in the heat. Some firms respond by easing new hires into hot work, giving them shorter shifts in the sun during their first week or two. That is a sensible step, and it helps, but it protects only one group and still leaves everyone else to decide alone when to stop. For these reasons, supervisors should not wait to be asked. When temperatures climb, they should call water and shade breaks for the whole crew on a fixed schedule, so that no one has to be the first to stop. They should also watch for warning signs such as heavy sweating, dizziness, and slurred speech, rather than relying on workers to notice those signs in themselves. The author's main purpose in the passage is to
- A.show why leaving heat breaks up to each worker fails on most job sites
- B.argue that new hires should be eased into hot work over their first weeks
- C.urge supervisors to set crew-wide breaks rather than wait for requests
- D.explain why overheated workers often fail to notice their own symptoms
Show answerHide answer
Correct answer: urge supervisors to set crew-wide breaks rather than wait for requests
The passage builds to its recommendation in the last paragraph: supervisors "should not wait to be asked" and "should call water and shade breaks for the whole crew on a fixed schedule." The explanation of why self-paced breaks fail is the support for that point, not the purpose, and easing in new hires is a step the author calls helpful but insufficient because "it protects only one group."
Read the passage, then answer the question. To: Shop crew From: Dana Ruiz, Tool Room Supervisor Over the past six months we have replaced eleven drills, four levels, and more saw blades than I want to count. Some of that is honest wear. Most of it, I believe, is not. When a tool comes back damaged, nobody knows who used it last, so nobody reports the damage. The next person picks up a bent level or a chipped blade without knowing it, keeps using it, and a small problem that could have been fixed becomes a ruined tool. Starting the first of next month, every shared tool will be signed out on the sheet by the tool room door, with your name, the date, and the job. When you return it, note anything wrong, even something minor. I know some of you worked in shops where reporting damage got you written up, and people there learned to hide it. That will not happen here: no one will be written up for honest wear or for an accident reported the same day. A few of you have told me the sheet will not help because tools mostly go missing rather than break. Tools left on job sites usually turn up within a week or two. Missing tools are a separate problem, and the sheet may help with it too, but that is not why I am starting it. I expect this to cut our replacement costs by catching damage early, while it can still be fixed. It will take each of you about thirty seconds per tool. Which finding, if true, would most seriously weaken the supervisor's reason for expecting the sheet to cut replacement costs?
- A.Shops that adopted sign-out sheets went on to lose fewer tools to theft
- B.Workers in other shops hid damage when they were written up for reporting it
- C.Most tools left on job sites came back to the tool room within a few days
- D.Most ruined tools in the shop were damaged past repair in one single mishap
Show answerHide answer
Correct answer: Most ruined tools in the shop were damaged past repair in one single mishap
The supervisor expects savings from "catching damage early, while it can still be fixed"; if most ruined tools were damaged past repair in one single mishap, there is no early, fixable stage for the sheet to catch. Workers hiding damage where they were written up is already answered by the memo's promise that no one will be written up for honest wear or an accident reported the same day, so it does not threaten this plan. Tools returning from job sites and fewer tools lost to theft both concern missing tools, which the memo calls a separate problem.
Read the passage, then answer the question. Cordless tools have changed the way many crews work, and the battery packs that power them are often the most expensive part of a kit to replace. Most packs today use lithium-ion cells, which hold a charge well but wear out faster under some conditions than others. A dead pack does not just stop one tool; on a busy job it can leave a worker standing idle until another pack is charged, and a replacement pack for a large drill or saw can cost more than the tool itself did. Heat is the main enemy. Battery makers note that a pack stored fully charged in a hot place loses capacity faster than one kept cool and partly charged, and most manufacturers say a pack that is hot from heavy use should cool before it goes on the charger. One habit helps a great deal: rotating the packs so that each gets similar use, instead of draining the same two packs and putting them back on the charger hot all day while the rest sit in the case. Our company's equipment records from last year show that crews who rotated their packs replaced fewer of them than crews who did not. I take that as proof that rotation is worth the trouble. Storage matters as well. For packs that will sit unused for weeks, many makers suggest keeping them partly charged in a shaded, dry place rather than completely full or completely empty. Many chargers will also refuse to charge a pack that is very cold until it warms up. A labeled charging station, with packs rotated so each gets similar use, takes about ten minutes to set up on a Monday morning. Which finding, if true, would most weaken the conclusion the author draws from the company's records?
- A.The crews that rotated their packs had been issued all-new packs early last year
- B.The crews that rotated their packs had run their tools more hours than the others
- C.The crews that rotated their packs had worked the same kinds of jobs as the other crews
- D.The crews that did not rotate their packs had charged most of them while still hot
Show answerHide answer
Correct answer: The crews that rotated their packs had been issued all-new packs early last year
The author treats the records as "proof that rotation is worth the trouble," but if the rotating crews had been issued all-new packs, the newer packs alone could explain why those crews replaced fewer of them. Heavier tool use by the rotating crews would make their lower replacement count more impressive, so it strengthens the conclusion. Similar jobs rule out one other explanation, and the other crews charging their packs hot fits the author's point that rotation keeps packs from going on the charger hot.
Read the passage, then answer the question. Ask a new carpenter which is more dangerous, a sharp chisel or a dull one, and most will pick the sharp one. It seems obvious: the sharper the edge, the worse the cut. The fear is understandable, since a fresh edge can open skin with almost no effort. Experienced woodworkers tend to answer the other way, and I agree with them. A sharp edge slices into wood with light, steady pressure, so the hand guiding it stays in control. A dull edge resists. The worker leans harder, the tool skids or suddenly breaks through, and the hand or body follows it before the worker can stop. Most of the chisel and knife injuries I have seen in shops happened at that moment of sudden release, not during a controlled cut. None of this makes a sharp edge harmless. When a keen chisel does reach skin, it cuts deeper and cleaner than a dull one, which is why I still teach students to keep both hands behind the edge at all times. My claim is about how often accidents happen, not about how bad any single one can be, and the two questions should not be confused. Keeping edges sharp takes some time. A few strokes on a sharpening stone before each job and a full sharpening every few weeks is enough for most hand tools. That time is cheap compared with a trip to the emergency room, and the work comes out cleaner as well. A worker who feels a tool begin to drag or tear the wood should stop and sharpen it rather than push on. Which finding from a survey of woodworking shops, if true, would most weaken the author's argument that dull edges are the greater danger?
- A.Most cuts in the shops surveyed with sharp tools were the deeper, cleaner ones
- B.Most cuts in the shops surveyed came during light, controlled strokes
- C.Most workers in the shops surveyed pushed harder on the duller tools
- D.Most beginners in the shops surveyed thought sharp tools were riskier
Show answerHide answer
Correct answer: Most cuts in the shops surveyed came during light, controlled strokes
The author's case rests on the claim that injuries happen at the "moment of sudden release" when a worker leans on a dull tool, "not during a controlled cut," so a finding that most cuts in the shops surveyed came during light, controlled strokes undercuts the main evidence. Deeper cuts from sharp tools do not weaken the argument, because the author already grants that a keen edge "cuts deeper" and says the claim is about how often accidents happen. Harder pushing on duller tools supports the author, and the beginners' belief is the very view the author reports and rejects.
Read the passage, then answer the question. Employees who cannot work a scheduled shift must call the attendance line at least one hour before the shift begins. Text messages and emails to coworkers do not count as notice. The attendance line records the time of every call, and those records are used if a question comes up later. An absence of three or more days in a row requires a note from a health care provider when the employee returns. This rule does not apply to approved vacation or to leave arranged in advance with a supervisor. We know that emergencies happen. A sick child, a car that will not start, or a family crisis can upset the best plans, and a single missed shift is rarely a problem by itself. What causes trouble for a crew is uncertainty. A supervisor who knows at 5:30 that someone is out can move people around to cover the gap; a supervisor who finds out at 7:15 cannot. Calling early is the most considerate thing an employee can do for the people they work beside. The handbook argues that calling in early lets a supervisor cover an absence. Which finding, if true, would most weaken that argument?
- A.A single missed shift rarely causes a serious problem for the crew by itself.
- B.Supervisors who hear early about an absence usually fill the spot before the shift.
- C.Replacement workers usually cannot be reached until after the shift has begun.
- D.Most absences at the company are called in between five and six in the morning.
Show answerHide answer
Correct answer: Replacement workers usually cannot be reached until after the shift has begun.
The handbook's argument assumes that an early warning gives the supervisor time to "move people around to cover the gap." If no replacement can be reached until the shift has started, the early call does not help cover the absence. The point that one missed shift is rarely a problem is already in the passage and concerns the absence itself, not whether early notice helps.
Read the passage, then answer the question. In the towns of medieval Europe, most skilled trades were controlled by guilds, associations of masters who set prices, standards of work, and rules for training. A boy who wished to learn a trade, often at twelve or fourteen, was bound to a master by a written agreement called an indenture. In England, terms of seven years were common. During those years the apprentice lived in the master's household. The master supplied food, lodging, clothing, and instruction, and in return the apprentice worked for little or no pay and promised to obey. He could not marry or leave his master's service without permission. When the term ended, the young worker became a journeyman. The word comes from the French journee, meaning a day's work or a day's pay, because a journeyman was hired and paid by the day. He was free to work for any master who would employ him. To become a master himself and open his own shop, he usually had to save money and, in many guilds, submit a piece of his best work, his masterpiece, for the guild's approval. The author explains where the word journeyman comes from mainly to
- A.explain why journeymen traveled from town to town seeking work
- B.suggest that the guild system first began in the towns of France
- C.show that a journeyman's workday was shorter than an apprentice's
- D.point out how the way a journeyman was paid set him apart from an apprentice
Show answerHide answer
Correct answer: point out how the way a journeyman was paid set him apart from an apprentice
The word origin says a journeyman "was hired and paid by the day," which stands against the apprentice who "worked for little or no pay" in the master's household. The passage never mentions travel; that choice comes from the English word "journey," not from the French word the author actually explains.
Read the passage, then answer the question. Long before satellites, people predicted the weather with sayings, and a few of them hold up better than you might expect. "Red sky at night, sailor's delight" is the best known. In the middle latitudes, where most of the United States and Europe lie, weather systems usually travel from west to east. The western sky therefore shows what is coming, while the eastern sky mostly shows weather that has already passed. A red sunset means the setting sun is shining through dry, dusty air to the west, and that dry air is on its way. The saying works only because of that direction of travel. In the trade-wind belt near the equator, the winds that carry weather usually blow from the east instead. A sailor there who trusted the western sky would be studying weather that had already gone by. The useful sky in that belt is the eastern one, and the clearest view of it comes at dawn, when the low sun lights the clouds that are headed toward the observer. Even the good sky signs have a short reach. High clouds that thicken and lower on the side the weather comes from often mean rain within a day, because the air that will arrive by then is already in view. The sky says almost nothing about next week, let alone next season; weather that far off has not formed yet. Other sayings have not aged as well. The claim that cows lie down before rain has never been borne out by careful study, and the stripes on a woolly caterpillar foretell nothing about the coming winter. The sayings that work share something: they read the sky on the side the weather comes from, and they look no more than a day or so ahead. Based on the passage, which weather sign would the author most likely accept as a useful hint?
- A.In the trade-wind belt, clouds thickening in the east at dawn mean rain by tomorrow
- B.In the middle latitudes, clouds thickening in the east at dusk mean rain by tomorrow
- C.In the trade-wind belt, clouds thickening in the west at dusk mean rain by tomorrow
- D.In the middle latitudes, clouds thickening in the west at dawn mean rain next week
Show answerHide answer
Correct answer: In the trade-wind belt, clouds thickening in the east at dawn mean rain by tomorrow
The second paragraph says that in the trade-wind belt weather "usually blow[s] from the east," so "the useful sky in that belt is the eastern one," and the third paragraph says thickening clouds on that side "often mean rain within a day," so eastern clouds at dawn there meet every condition. The trade-wind sign that watches the west fails because a sailor there "would be studying weather that had already gone by," and the middle-latitude sign that watches the east fails for the same reason in reverse. The western middle-latitude sign looks the right way but reaches a week ahead, which the passage says the sky cannot do.
Read the passage, then answer the question. For most of human history, the night was lit by flame. Candles and oil lamps gave weak, smoky light, and in the early 1800s many large cities began piping coal gas to street lamps and homes. Gas light was brighter and steadier, but it left soot on walls, fouled the air in closed rooms, and caused fires and explosions when pipes leaked. Electric arc lamps, which made light from a spark leaping between two carbon rods, began to appear in the 1870s. Cities used them for streets and squares and for large halls such as railway stations and exhibition buildings, where a single lamp could light a wide area. They were far brighter than gas, but that was part of the problem: their glare was too harsh for a parlor or kitchen, and their rods burned away and had to be replaced often. The answer for homes was the incandescent bulb, in which a thin filament glows when current passes through it. Several inventors worked on the idea, and Joseph Swan in England and Thomas Edison in the United States each produced practical versions around 1879 and 1880. Edison also understood that a bulb was useless without a supply of power, and in 1882 his company opened one of the first central power stations, on Pearl Street in New York. Electric light spread slowly at first. Wiring a building was costly, and power lines reached cities long before they reached the countryside, so many rural homes in the United States still burned oil lamps well into the 1930s. For those families, the night was still lit by flame. The passage supports each of the following statements EXCEPT:
- A.Some arc lamps were used indoors as well as on city streets and squares
- B.Edison produced the first practical bulb, and Swan's version came after his
- C.Gas light was an improvement over flame lamps but brought hazards of its own
- D.Edison saw that a working bulb alone would not bring light into homes
Show answerHide answer
Correct answer: Edison produced the first practical bulb, and Swan's version came after his
The third paragraph says only that Swan and Edison "each produced practical versions around 1879 and 1880" and that "several inventors worked on the idea," so nothing in the passage says Edison came first. The indoor arc-lamp statement looks false but is supported, because cities used arc lamps in "large halls such as railway stations and exhibition buildings." Gas was "brighter and steadier" yet caused "fires and explosions," and Edison "understood that a bulb was useless without a supply of power."
Read the passage, then answer the question. At last month's meeting, council member Ray Okafor proposed covering the closed Millbrook landfill with solar panels. His case rests on three points. First, the land cannot be used for houses, parks, or farming, because the ground is still settling and the soil cap that seals in the old waste must not be broken. Second, the site is open and flat, with no trees or buildings to cast shade, and it lies next to a power line that could carry the output into town. Third, the town already pays a private company to mow and inspect the site, and a solar operator that took over that work would save the town money. Okafor estimates that the project would supply about a fifth of the electricity used by town buildings. Panels on a landfill, he explains, are mounted on heavy concrete blocks that rest on top of the ground instead of on posts driven into it, so they would leave the cap untouched. He granted that the blocks cost more than posts but called the extra expense small next to the savings the town would see over the life of the panels. Critics have asked whether the town should simply sell the land instead. Okafor's answer is that nobody would buy it for any other use, and that the panels would turn a yearly cost into a source of income. One critic also questioned the one-fifth estimate, but Okafor says it comes from the output of similar sites in the region. A vote is expected next spring, after an engineering review of the site is complete. Which finding from the engineering review, if true, would most seriously weaken Okafor's case?
- A.The blocks needed to hold the panels would cost about twice as much as posts would
- B.A solar operator would want the town to keep paying for mowing and inspecting the site
- C.The weight of the concrete blocks alone would be enough to crack the soil cap
- D.The panels at the site would produce slightly less than the panels at similar sites
Show answerHide answer
Correct answer: The weight of the concrete blocks alone would be enough to crack the soil cap
Okafor's plan depends on blocks that "leave the cap untouched," and the first paragraph says the cap "must not be broken," so blocks heavy enough to crack it would undo the mounting method the whole project rests on. Higher block costs hurt less, because Okafor already granted the blocks "cost more than posts" and argued the savings outweigh them. The mowing finding and the slightly lower output each trim one supporting point, but neither makes the project unworkable.
Read the passage, then answer the question. Walk into any hardware store and you can buy a screwdriver for a dollar or for twenty. It is tempting to say the expensive one is always the better buy, but that is not quite true. For a tool you will use twice a year to tighten a cabinet hinge, the bargain version will usually serve you fine. The picture changes for tools used every day. A cheap screwdriver tip can round over and start to strip the screws it was meant to drive. For a homeowner, that is an annoyance; for someone paid to build things, it is wasted material and wasted time. There is also one kind of tool for which a bargain costs too much however rarely it is used: anything that measures. A level that reads slightly off or a square that is not quite square ruins every cut it guides, and you may not find the error until the job is done. Protective gear follows its own rule. Glasses, earplugs, and gloves should be chosen by their safety rating, never by price or by how often the job comes up. A one-dollar pair of foam earplugs with the same noise rating as a forty-dollar pair of earmuffs protects your hearing just as well, while stylish sunglasses with no impact rating do not protect your eyes at all. For everything else, buy cheap first when you are unsure you will need a tool, and replace it with a better one once you find yourself reaching for it often. Plenty of professionals keep a bargain version of a tool they use once a season. Which purchase is consistent with all of the author's advice?
- A.A carpenter keeps a bargain level that she uses only once each season
- B.A homeowner buys a costly sander for a job he may never need to redo
- C.A tile setter keeps a bargain trowel that she now reaches for each day
- D.A painter buys one-dollar foam earplugs rated as high as costly muffs
Show answerHide answer
Correct answer: A painter buys one-dollar foam earplugs rated as high as costly muffs
Paragraph 3 says protective gear is chosen "by their safety rating, never by price," and that cheap earplugs with the same rating protect "just as well," so the painter's purchase fits. The once-a-season level is tempting because paragraph 4 says professionals keep bargain once-a-season tools, but paragraph 2 says a bargain costs too much for "anything that measures," however rarely it is used. The costly sander ignores the advice to buy cheap first when unsure, and a trowel used every day should be upgraded.
Read the passage, then answer the question. In the early 1900s, most American tradespeople learned their work informally. A young worker took a job as a helper and picked up whatever skills the jobs in front of him happened to require. Some helpers were taught carefully by experienced mechanics. Others spent years carrying materials and digging while the employer called them apprentices, paid them less, and taught them little that would let them earn more. The result was uneven skill. Two workers with the same job title and the same years in the trade might know very different things, and an employer hiring a stranger had no reliable way to tell them apart. Contractors who did train their helpers well also found that rivals could hire those workers away once the training was done, so careful training often went unrewarded. Starting in the 1910s and 1920s, unions and contractors in some trades and cities began setting up joint committees to run apprenticeship together, though the idea spread slowly and unevenly. The committees wrote down which skills an apprentice had to learn, required classroom instruction alongside paid work, and set pay that rose as the apprentice advanced. In 1937, Congress passed the National Apprenticeship Act, which drew on the committees' example and led to national standards for apprenticeship. The law did not order anyone to adopt those standards; a program that met them could choose to register, and many never did. Today, a registered apprenticeship still combines paid work hours with related classroom study, and in many trades the joint committees still decide which skills an apprentice must show. The passage supports each of the following statements EXCEPT:
- A.The joint committees were first set up in order to carry out the 1937 law
- B.Many apprenticeship programs ran after 1937 without ever being registered
- C.Contractors who trained their helpers well were not always rewarded for it
- D.Some employers used the title of apprentice to pay their helpers less money
Show answerHide answer
Correct answer: The joint committees were first set up in order to carry out the 1937 law
The third paragraph says the committees began "in the 1910s and 1920s," and the fourth says the 1937 law "drew on the committees' example," so the committees came first and were not created to carry out the law. The statement about unregistered programs looks doubtful but is supported, since a program "could choose to register, and many never did." The passage also says careful training "often went unrewarded" and that some employers "called them apprentices, paid them less."
Read the passage, then answer the question. On the evening of November 9, 1965, the lights went out across much of the northeastern United States and parts of Ontario, Canada. Some 30 million people lost power, some for as long as thirteen hours. Subway trains stopped between stations, elevators stalled between floors, and New York City went dark during the evening rush. The trouble began at a power station in Ontario with a protective relay, a device that switches off a transmission line when it senses an overload. The relay did exactly what it was built to do, but it had been set to trip at a level lower than the line was by then routinely carrying. When it switched off the line, the power that had been flowing along it shifted onto neighboring lines. Those lines overloaded and shut down in turn, and within minutes a chain of failures had spread across the connected systems of the region. The blackout showed that the same links that let neighboring systems help one another can also carry trouble from one system to the next. Engineers did not conclude that the links should be cut; the ability to borrow power from a neighbor in an emergency was too valuable to give up. Instead, utilities formed regional councils to coordinate planning and set shared reliability standards, and they added equipment designed to separate a failing area from the rest of the grid before its problems could spread. Large blackouts still happen, and a few have affected even more people than the one in 1965. But engineers now study each one closely for ways to stop the next. Which statement is best supported by the passage?
- A.The relay that began the failure broke down under a heavy overload
- B.The device that tripped first was working but had been set too low
- C.The utilities later cut many of the links that let the failure spread
- D.Most of the people who lost power went without it for thirteen hours
Show answerHide answer
Correct answer: The device that tripped first was working but had been set too low
The second paragraph says the relay "did exactly what it was built to do, but it had been set to trip at a level lower than the line was by then routinely carrying," so it was working but set too low. Nothing broke down; the relay switched the line off, and only then did other lines overload. The links were not cut, since engineers judged them "too valuable to give up" and added equipment to separate a failing area instead, and the passage says only "some" people were without power "for as long as thirteen hours."
Read the passage, then answer the question. Falls are the leading cause of death in construction, and roofs are where many of them happen. On this project, anyone working within six feet of an unprotected roof edge must wear a full-body harness tied to an approved anchor. Where a guardrail runs along the edge, a harness is not required, because the rail itself stops the fall. Some roofers say that tying off slows the work and that experienced hands can keep their footing without it. The first point is fair. Moving a lanyard from anchor to anchor along a long roof adds minutes to every hour, and on a tight schedule those minutes are felt. The second point does not hold up. A fall rarely follows a lapse in skill. A patch of wet felt, a gust that catches a sheet of plywood, or a step backward to look over the work can put anyone over the edge, no matter how many years that person has spent on roofs. A harness does not depend on the wearer doing everything right. Where the extra minutes are a real burden, the answer is not to skip the harness but to plan the anchors. Placing them before work starts, at spacing that matches the crew's route along the roof, cuts most of the delay and leaves the crew no reason to skip a tie-off. Before each shift, check the webbing for cuts or burns, the buckles for cracks, and the lanyard for wear. Remove any damaged harness from service and report it to your supervisor. Do not try to repair webbing or replace hardware on site. Which finding, if true, would most seriously weaken the author's claim that experience does not protect a roofer from falling?
- A.Most falls on similar jobs happened on wet felt or in a sudden gust
- B.Planning anchors ahead of time removed only a small part of the delay
- C.Nearly all falls on similar jobs involved roofers still in their first year
- D.Moving a lanyard between anchors took more time than roofers claimed
Show answerHide answer
Correct answer: Nearly all falls on similar jobs involved roofers still in their first year
The author argues that a fall "rarely follows a lapse in skill" and can happen to anyone "no matter how many years" on roofs; if nearly all falls on similar jobs involved roofers still in their first year, experience would clearly protect against falls. Falls on wet felt or in a sudden gust would support the author, since those are the chance events paragraph 2 lists. The findings about planning anchors and moving a lanyard bear on the separate time-cost argument in paragraphs 2 and 3, not on the experience claim.
Read the passage, then answer the question. To: All field staff From: Marcus Bell, Safety Coordinator Re: Stepladders Last Thursday, a helper on the Harlan Street job fell from a six-foot stepladder while hanging a sign bracket. He had been standing on the top cap, which our rule and the label on every stepladder forbid. He landed on a pile of packing foam and was back at work the next day. He was lucky, and luck is not a plan. Standing on the top cap was the wrong call, and he knows it; he told me so himself. But when I asked why he did it, his answer was simple. The eight-foot ladder the task called for was on the Pine Street job, the work would take two minutes, and the six-footer was right there. I checked the equipment list: we own four eight-foot ladders for seven crews. On any busy day someone is going to be short, and I understand how a two-minute job turns into a top-cap job when the right ladder is across town. So here is what changes. Three more eight-foot ladders arrive next week. Until they do, any crew without the right ladder must call the yard before starting work it cannot reach safely, and the yard will send one or reschedule the task. The rule itself does not change: no one stands on the top cap or the step below it. I am not writing anyone up for last Thursday. Once the new ladders arrive, standing on the top two steps will be handled like any other safety violation, with no exceptions for short tasks. Crew leads, please read this memo aloud at Monday's start-of-shift meeting. The writer of the memo would most likely agree with which statement about the helper's choice?
- A.It was reasonable, as the right ladder was out on another job site that day
- B.It should draw the same penalty as any other safety violation now
- C.It shows that the top-step rule is too strict for very short tasks
- D.It was a mistake, though one made easier by a shortage of ladders
Show answerHide answer
Correct answer: It was a mistake, though one made easier by a shortage of ladders
The writer calls standing on the top cap "the wrong call" yet says "I understand how" it happened when "we own four eight-foot ladders for seven crews," so the writer would agree it was a mistake made easier by a shortage of ladders. Calling the choice reasonable goes too far, because sympathy is not approval and the rule stays unchanged. No one is being written up for last Thursday; penalties apply only after the new ladders arrive, with "no exceptions for short tasks," and the memo never suggests the rule is too strict.
Read the passage, then answer the question. Many people treat a thunderstorm as something that arrives with the rain. They keep playing, fishing, or working until the first heavy drops fall, and only then head for shelter. The habit is understandable, because rain is the part of a storm we can feel. It is also backward. Lightning can strike several miles from the storm that produces it, sometimes from a sky that still looks partly clear overhead. Weather services give a simple rule: if you can hear thunder, you are close enough to be struck. Thunder rarely carries more than about ten miles, which is also roughly the distance lightning can reach ahead of a storm. Once thunder is heard, the usual advice is to stay sheltered until thirty minutes have passed since the last rumble. Lifeguards and coaches sometimes object that the rule empties pools and fields for storms that pass by without striking anything nearby. They are right that it often does. But a rule that is wrong in the safe direction a few times a summer is still a good rule, because no one can tell in advance which storm will be the one that strikes. Parents raise a different worry: that the rule will keep children indoors all summer. It need not. Most storms can be avoided by checking the forecast and planning outdoor play and work for earlier in the day. What the evidence does ask is that we stop waiting for the storm to prove itself. By the time the rain is heavy, people outside may already have spent several minutes within reach of lightning. How does the author respond to the objection from lifeguards and coaches?
- A.Accepts their claim but denies that it shows the rule is a bad one
- B.Accepts their claim and offers forecast planning as a way to meet it
- C.Rejects their claim, saying most storms heard under the rule do strike nearby
- D.Rejects their claim but grants that the rule could be eased for pools
Show answerHide answer
Correct answer: Accepts their claim but denies that it shows the rule is a bad one
The third paragraph says the coaches "are right that it often does" empty pools needlessly, then argues that a rule "wrong in the safe direction" is "still a good rule," so the author accepts their claim but denies it makes the rule bad. Forecast planning answers a different objection, the parents' worry about staying indoors, which the last paragraph calls "a different worry." The author never disputes the coaches' facts and never suggests easing the rule.
Read the passage, then answer the question. For many young people, the path into a skilled trade begins with an apprenticeship rather than a college degree. The two routes differ in many ways, but the most immediate difference is money. A registered apprentice is an employee from the first day. Apprentices are paid for their hours on the job, and their wages rise in steps as they complete each stage of training. In many programs, the cost of classroom instruction is covered largely or entirely by the program itself, which is funded by employers and, in union programs, by contributions negotiated in labor contracts. Many students at four-year colleges, by contrast, finish their degrees owing money that they must begin to repay soon after graduation. None of this means an apprenticeship is easy. Apprentices work full days and then attend classes in the evening, often for four or five years. The work can be physically hard, and an apprentice who does not keep up with classes may be dropped from the program. But an apprentice who finishes does so with a trade, a work history, and, in most cases, no school debt. The sentence about students at four-year colleges mainly serves to
- A.argue that a college degree is a poor choice for most young people
- B.sharpen the money advantage of the apprentice's route by contrast
- C.explain how union programs pay for the classes that they offer
- D.introduce the hardships of apprenticeship covered in the final paragraph
Show answerHide answer
Correct answer: sharpen the money advantage of the apprentice's route by contrast
The sentence is marked "by contrast" and follows the details of apprentices' pay and covered class costs, so it sets college debt against those to make the "most immediate difference," money, stand out. The author never calls college a poor choice and even adds that an apprenticeship is not easy, so the stronger claim goes beyond the passage.
References
- 1.Electrical Training Alliance. “Applying for Apprenticeship (aptitude test battery, retest rule, interview and eligibility list).” electricaltrainingalliance.org, accessed Nov 15, 2026. ↑
- 2.Electrical Training Alliance. “Preparing for the Test (sample algebra and reading items).” electricaltrainingalliance.org, accessed Nov 15, 2026. ↑
- 3.New York State Department of Labor. “Electricians JAC Binghamton, IBEW LU 325: apprentice recruitment notice.” dol.ny.gov, accessed Nov 15, 2026. ↑
- 4.Westchester-Fairfield Electrical JATC (IBEW Local 3). “Apprentice Training Program recruitment, 7/1/25 to 6/30/26.” jibei.org, accessed Nov 15, 2026. ↑
- 5.Puget Sound Electrical JATC (IBEW Local 46). “Inside Wireman registered apprenticeship standards.” careerbridge.wa.gov, accessed Nov 15, 2026. ↑
- 6.Portsmouth Electrical JATC (IBEW Local 575). “Inside Wireman apprenticeship: application, aptitude test and interview.” electricaltrainingacademy.org, accessed Nov 15, 2026. ↑
- 7.JATC Local 26. “GAN aptitude test and Personal Experience Form: bullet points (2026).” jatc26.org, accessed Nov 15, 2026. ↑
- 8.Boston JATC (IBEW Local 103). “Interested in Applying.” bostonjatc.com, accessed Nov 15, 2026. ↑
- 9.Phoenix Electrical JATC. “Frequently Asked Questions.” pejatc.org, accessed Nov 15, 2026. ↑
- 10.Electrical Trades Center (IBEW Local 683). “Application Process.” electricaltrades.org, accessed Nov 15, 2026. ↑

Career Employer
Career Employer is the ultimate resource to help you get started working the job of your dreams. We cover topics from general career information, career searching, exam preparation with free study materials, career interviewing, and becoming successful in your career of choice.
All PostsCareer Employer’s Editorial Process
Here at Career Employer, we focus a lot on providing factually accurate information that is always up to date. We strive to provide correct information using strict editorial processes, article editing, and fact-checking for all of the information found on our website. We only utilize trustworthy and relevant resources. To find out more, make sure to read our full editorial process page here.
