- On most New Jersey roadways where no speed limit is posted, what is the maximum legal speed?
Correct answer: 50 mph
In New Jersey, the statutory speed limit on all other roadways (where none is posted) is 50 mph. 55 mph applies on certain state highways and interstates as posted, and 65 mph only on certain state highways where specifically posted.
- What is the New Jersey speed limit, unless otherwise posted, in a school zone, business district, or residential district?
Correct answer: 25 mph
New Jersey law sets the speed limit at 25 mph in school zones and in business or residential districts unless otherwise posted. Certain lower-density business and residential districts are posted at 35 mph.
- On which New Jersey roadways may a posted speed limit of 65 mph be in effect?
- Certain state highways where 65 mph is specifically posted
- All interstate highways automatically
- Any divided highway
- All county roads
Correct answer: Certain state highways where 65 mph is specifically posted
In New Jersey, 65 mph applies only on certain state highways where it is specifically posted. Most interstates and other state highways are posted at 55 mph, and the limit is never assumed to be 65 mph without a sign.
- In New Jersey, an adult driver age 21 or older is considered legally intoxicated (DWI) at what blood alcohol concentration (BAC)?
- 0.08 percent or higher
- 0.10 percent or higher
- 0.05 percent or higher
- 0.04 percent or higher
Correct answer: 0.08 percent or higher
Under N.J.S.A. 39:4-50, a driver 21 or older is guilty of driving while intoxicated with a BAC of 0.08 percent or higher. The 0.04 standard applies to commercial drivers and 0.01 to drivers under 21.
- Under New Jersey's zero-tolerance law, a driver under age 21 can be penalized for operating a vehicle with a BAC of at least what level?
- 0.01 percent
- 0.08 percent
- 0.05 percent
- 0.02 percent
Correct answer: 0.01 percent
New Jersey's zero-tolerance law (N.J.S.A. 39:4-50.14) makes it illegal for anyone under 21 to drive with a BAC of 0.01 percent or more but less than 0.08 percent, with penalties including license loss and required alcohol education programs.
- In New Jersey, the lower BAC limit of 0.04 percent applies specifically to which drivers?
- Drivers operating a commercial motor vehicle (CDL)
- All drivers under age 30
- Drivers with a probationary license
- Motorcyclists only
Correct answer: Drivers operating a commercial motor vehicle (CDL)
New Jersey applies a 0.04 percent BAC limit to drivers operating a commercial motor vehicle. The adult car-driver limit is 0.08 percent, and under-21 drivers are held to a 0.01 percent zero-tolerance standard.
- After a New Jersey DWI conviction, a court may order what device installed to keep the vehicle from starting if alcohol is detected?
- An ignition interlock device
- A dashboard breath monitor that only records data
- A speed governor
- A GPS tracker
Correct answer: An ignition interlock device
New Jersey courts may require an ignition interlock device after a DWI; it prevents the engine from starting if the driver's breath registers alcohol. Installation is mandatory when the BAC was 0.15 percent or higher.
- Under New Jersey's Move Over Law, what must a driver do when approaching a stopped emergency, tow, or highway maintenance vehicle displaying flashing lights?
- Change into a lane not next to the vehicle if it is safe; if not, slow below the posted speed and be ready to stop
- Maintain the posted speed limit and stay in the current lane
- Stop completely in the travel lane until the vehicle leaves
- Sound the horn and continue at normal speed
Correct answer: Change into a lane not next to the vehicle if it is safe; if not, slow below the posted speed and be ready to stop
New Jersey's Move Over Law (N.J.S.A. 39:4-92.2) requires drivers to change into a non-adjacent lane when conditions permit; if a lane change is unsafe or impossible, the driver must slow to below the posted speed limit and be prepared to stop.
- What is the fine range for violating New Jersey's Move Over Law?
- Not less than $100 and not more than $500
- A flat $25 fine
- Not less than $1,000
- A warning only on the first offense
Correct answer: Not less than $100 and not more than $500
Under New Jersey's Move Over Law, motorists who fail to move over or slow down face a fine of not less than $100 and not more than $500.
- In New Jersey, using a handheld cell phone to talk or text while driving is what type of offense?
- A primary offense, meaning police can stop you for it alone
- A secondary offense, requiring another violation first
- Legal as long as you are stopped at a red light
- Allowed if the phone is on speaker
Correct answer: A primary offense, meaning police can stop you for it alone
New Jersey bans handheld phone use while driving as a primary offense, so an officer may stop and ticket a driver solely for that violation. Talking, texting, and using a handheld device are all prohibited.
- What is the minimum fine for a first offense of using a handheld wireless phone while driving in New Jersey?
Correct answer: $200
In New Jersey, a first handheld-phone offense carries a fine of $200 to $400. A second offense is $400 to $600, and a third or subsequent offense is $600 to $800 plus possible license suspension and motor vehicle points.
- Under New Jersey's child passenger restraint law, how must a child under age 2 and under 30 pounds be secured?
- In a rear-facing seat equipped with a 5-point harness, in the rear seat
- In a forward-facing car seat
- In a booster seat with the lap belt only
- With the vehicle's regular seat belt
Correct answer: In a rear-facing seat equipped with a 5-point harness, in the rear seat
New Jersey law (Title 39:3-76.2a) requires a child under both 2 years of age and 30 pounds to ride in a rear-facing seat with a 5-point harness, secured in the rear seat of the vehicle.
- Under New Jersey law, a child who is under age 4 and under 40 pounds (and has outgrown rear-facing) must be secured how?
- In a forward-facing child restraint equipped with a 5-point harness
- In a belt-positioning booster seat
- With only the lap and shoulder belt
- In the front seat with the airbag on
Correct answer: In a forward-facing child restraint equipped with a 5-point harness
Under Title 39:3-76.2a, once a child under 4 years and 40 pounds reaches the upper limits of the rear-facing seat, the child must ride in a forward-facing child restraint with a 5-point harness.
- Under New Jersey's child restraint law, when may a child be secured with only the vehicle's seat belt instead of a booster seat?
- When the child is over age 8 OR over 57 inches in height
- When the child is over age 5
- When the child weighs more than 40 pounds
- When the child can reach the floor
Correct answer: When the child is over age 8 OR over 57 inches in height
New Jersey law (Title 39:3-76.2a) requires a belt-positioning booster seat for a child under age 8 and under 57 inches tall. A child over 8 years of age or over 57 inches in height must be properly secured by a seat belt.
- Where does New Jersey's child restraint law require children covered by the law to ride?
- In the rear seat
- In the front passenger seat
- Anywhere as long as they are buckled
- Only in the center front seat
Correct answer: In the rear seat
Under Title 39:3-76.2a, a child under 8 years and 57 inches must be secured in the rear seat. A rear-facing seat may not be placed in front of an active passenger-side airbag.
- In New Jersey, the front-seat seat belt law is enforced as which type of offense?
- A primary offense for the driver and front-seat passengers
- A secondary offense only
- Not enforced for adults
- Only enforced at sobriety checkpoints
Correct answer: A primary offense for the driver and front-seat passengers
New Jersey enforces the seat belt requirement for the driver and front-seat occupants as a primary offense, meaning police may stop a vehicle solely for an unbelted front-seat occupant.
- For adult passengers in the REAR seat of a New Jersey vehicle, the seat belt requirement is enforced how?
- As a secondary offense, ticketed only if stopped for another violation
- As a primary offense, same as the front seat
- It does not apply to rear-seat adults at all
- Only for passengers over age 65
Correct answer: As a secondary offense, ticketed only if stopped for another violation
In New Jersey, the rear-seat belt requirement for adult passengers is a secondary offense; it can be enforced only when the driver has been stopped for another suspected violation. The fine is $25 with no points.
- Under New Jersey's Graduated Driver License (GDL) program, what is the minimum age to apply for a special learner's permit (with an approved driver education course)?
- 16 years old
- 15 years old
- 17 years old
- 18 years old
Correct answer: 16 years old
New Jersey's GDL allows a teen to obtain a special learner's permit at age 16 if enrolled in an approved behind-the-wheel driver education program. An examination permit is available at 17.
- In New Jersey, at what age may a teen who did not take a special learner's permit apply directly for an examination permit?
- 17 years old
- 16 years old
- 18 years old
- 15 and a half years old
Correct answer: 17 years old
New Jersey's GDL program allows a person to apply for an examination permit at age 17. A 16-year-old must instead get a special learner's permit through an approved driver education course.
- What red marker does New Jersey require GDL learner's permit, examination permit, and probationary license holders under 21 to display on their license plates (Kyleigh's Law)?
- A red reflectorized decal on the upper left of the front and rear plates
- A green sticker on the rear windshield
- A yellow magnet on the driver's door
- A blue tag hanging from the mirror
Correct answer: A red reflectorized decal on the upper left of the front and rear plates
Under New Jersey's Kyleigh's Law, GDL permit and probationary license holders under 21 must display a red reflectorized decal on the upper left corner of both the front and rear license plates while driving.
- What is the fine in New Jersey for a young GDL driver who fails to display the required red reflectorized decals?
Correct answer: $100
New Jersey imposes a $100 fine on a learner's permit, examination permit, or probationary license holder subject to the GDL who fails to display the red reflectorized decals. The decals cost $4 per pair at motor vehicle agencies.
- What is the nighttime driving curfew for New Jersey GDL permit and probationary license holders?
- They may not drive after 11:01 p.m. and before 5:00 a.m.
- They may not drive after 9:00 p.m. and before 6:00 a.m.
- They may not drive after midnight and before 6:00 a.m.
- There is no nighttime restriction in New Jersey
Correct answer: They may not drive after 11:01 p.m. and before 5:00 a.m.
Under New Jersey's GDL rules, permit and probationary license holders may not operate a motor vehicle after 11:01 p.m. and before 5:00 a.m. (limited exceptions apply for employment or religious reasons with documentation).
- Under New Jersey's GDL, how many passengers may a probationary license holder (under 21) carry, unless accompanied by a parent or guardian?
- Only one passenger, plus dependents, unless a parent or guardian is present
- Up to three friends
- As many as there are seat belts
- No passengers ever
Correct answer: Only one passenger, plus dependents, unless a parent or guardian is present
New Jersey's GDL limits a probationary (and permit) holder to one additional passenger besides the driver's parents, guardians, or dependents, unless a parent or guardian is in the vehicle.
- Under New Jersey's GDL, may a permit or probationary driver use a hands-free cell phone while driving?
- No, both handheld and hands-free devices are prohibited
- Yes, hands-free use is always allowed
- Yes, but only for calls, not texting
- Yes, if a passenger holds the phone
Correct answer: No, both handheld and hands-free devices are prohibited
New Jersey's GDL prohibits permit and probationary drivers from using any handheld OR hands-free interactive wireless communication device while driving, a stricter rule than for fully licensed adult drivers.
- At what age do New Jersey's GDL restrictions (decal, curfew, passenger limit) no longer apply?
- At age 21
- At age 18
- At age 19
- When the probationary period ends, regardless of age
Correct answer: At age 21
New Jersey's GDL decal, curfew, passenger, and device restrictions apply to permit and probationary drivers until they turn 21. A driver who completes the probationary period before 21 still follows the rules until age 21.
- How long must a New Jersey driver hold a probationary (provisional) license before getting a basic, unrestricted license?
- A minimum of 12 months
- A minimum of 3 months
- A minimum of 6 weeks
- There is no minimum period
Correct answer: A minimum of 12 months
In New Jersey, a probationary license must be held for a minimum of 12 months (with no major violations) before the driver may obtain a basic, unrestricted license at a motor vehicle agency.
- How long must a New Jersey driver under 21 hold a permit before applying for a probationary license?
- A minimum of 6 months
- A minimum of 1 month
- A minimum of 2 years
- No minimum holding period applies
Correct answer: A minimum of 6 months
New Jersey requires any permit holder under 21 to hold the permit for at least 6 months of supervised driving before taking the road test for a probationary license.
- When must a New Jersey driver turn on the vehicle's headlights?
- From a half hour after sunset to a half hour before sunrise, and whenever windshield wipers are in continuous use
- Only between midnight and 6:00 a.m.
- Only when it is completely dark outside
- Only on highways, never on local roads
Correct answer: From a half hour after sunset to a half hour before sunrise, and whenever windshield wipers are in continuous use
New Jersey law requires headlights from a half hour after sunset until a half hour before sunrise, and the wipers-on/headlights-on rule requires headlights whenever windshield wipers are operating continuously due to rain, snow, or fog. Daytime running lights alone do not satisfy this.
- On a New Jersey multi-lane highway, where should a driver generally stay except when passing?
- In the right-hand lane, using the left lane only to pass slower traffic
- In the left lane, since it is the fastest
- In the center lane at all times
- In whichever lane has the least traffic
Correct answer: In the right-hand lane, using the left lane only to pass slower traffic
New Jersey's keep-right law requires drivers to stay in the right-hand lane and use the left lane only for passing. Cruising in the left lane and blocking faster traffic is a violation.
- In New Jersey, what should a driver do when an emergency vehicle approaches with its siren and flashing lights on?
- Pull over to the right edge of the road and stop until it passes
- Speed up to get out of the way
- Stop immediately in the current lane
- Continue driving normally
Correct answer: Pull over to the right edge of the road and stop until it passes
New Jersey law requires drivers to yield to an approaching emergency vehicle by pulling over to the right edge of the roadway, stopping, and remaining stopped until the emergency vehicle has passed.
- At a four-way stop in New Jersey where two vehicles arrive at the same time, who has the right-of-way?
- The driver on the right
- The driver on the left
- The larger vehicle
- The faster vehicle
Correct answer: The driver on the right
Under New Jersey right-of-way rules, when two vehicles reach an intersection or four-way stop at the same time, the driver on the left must yield to the driver on the right.
- In New Jersey, who must yield when a driver is turning left at an intersection?
- The turning driver must yield to oncoming traffic and pedestrians
- Oncoming traffic must always stop for the turning driver
- Pedestrians must wait for all turning vehicles
- Neither driver has to yield
Correct answer: The turning driver must yield to oncoming traffic and pedestrians
New Jersey right-of-way law requires a driver turning left to yield to oncoming vehicles that are close enough to be a hazard and to any pedestrians crossing in the path of the turn.
- In New Jersey, what must a driver do for a pedestrian within a marked crosswalk?
- Stop and stay stopped for the pedestrian
- Slow down but continue through
- Honk and proceed
- Only yield if the pedestrian is in the same lane
Correct answer: Stop and stay stopped for the pedestrian
New Jersey law requires drivers to STOP and remain stopped for a pedestrian crossing within a marked crosswalk. Failure to stop carries a fine, points, and possible community service.
- What does a flashing red traffic signal mean for a New Jersey driver?
- Come to a full stop, then proceed when safe, as at a stop sign
- Slow down and proceed with caution without stopping
- The signal is broken; ignore it
- Stop and wait for a green light
Correct answer: Come to a full stop, then proceed when safe, as at a stop sign
In New Jersey, a flashing red signal is treated like a stop sign: the driver must come to a complete stop and may proceed only when it is safe to do so.
- What does a flashing yellow traffic signal mean in New Jersey?
- Slow down and proceed with caution
- Come to a complete stop
- The intersection is closed
- Speed up to clear the intersection
Correct answer: Slow down and proceed with caution
A flashing yellow signal in New Jersey warns drivers to slow down and proceed with caution through the intersection; it does not require a full stop.
- On a New Jersey roadway, what does a solid white line between lanes of traffic moving in the same direction indicate?
- Lane changing is discouraged; stay in your lane
- You may pass freely
- Traffic ahead is moving in the opposite direction
- The lane is for emergency vehicles only
Correct answer: Lane changing is discouraged; stay in your lane
In New Jersey, a solid white line separates lanes traveling in the same direction and discourages lane changes. A broken white line allows lane changes when safe.
- What does a double solid yellow line in the center of a New Jersey two-way road mean?
- Passing is prohibited in both directions
- Passing is allowed for both directions
- It marks the edge of the roadway
- It separates lanes going the same way
Correct answer: Passing is prohibited in both directions
In New Jersey, double solid yellow lines separate opposing traffic and prohibit passing for traffic in both directions. Yellow lines always divide traffic moving in opposite directions.
- In New Jersey, an eight-sided (octagonal) red sign always means what?
- Stop
- Yield
- Do not enter
- Railroad crossing
Correct answer: Stop
An octagonal red sign in New Jersey, as nationwide, always means STOP: the driver must come to a complete stop at the marked line, crosswalk, or intersection.
- What shape and color identifies a warning sign in New Jersey, such as one alerting drivers to a curve ahead?
- A yellow diamond shape
- A red triangle
- A green rectangle
- A white circle
Correct answer: A yellow diamond shape
In New Jersey, warning signs are yellow and diamond-shaped, alerting drivers to road conditions ahead such as curves, intersections, or merging traffic.
- What does a pennant-shaped (sideways triangle) yellow sign on the left side of a New Jersey road indicate?
- No passing zone
- Yield ahead
- School zone
- Dead end
Correct answer: No passing zone
In New Jersey, a yellow pennant-shaped sign placed on the left side of the road marks the beginning of a no-passing zone.
- In New Jersey, what is the recommended minimum following distance behind another vehicle under normal conditions?
- At least a two-second gap, increased in poor conditions
- One car length regardless of speed
- Exactly 10 feet
- Half a second
Correct answer: At least a two-second gap, increased in poor conditions
New Jersey teaches the two-second rule: pick a fixed point and ensure at least two seconds pass between the vehicle ahead reaching it and your vehicle reaching it. Increase the gap in rain, snow, fog, or at higher speeds.
- When approaching a New Jersey school bus stopped with its red lights flashing on an undivided road, what must a driver do?
- Stop at least 25 feet away in both directions and wait until the lights stop flashing
- Slow to 10 mph and pass carefully
- Pass only on the left side
- Continue if no children are visible
Correct answer: Stop at least 25 feet away in both directions and wait until the lights stop flashing
New Jersey law requires drivers on an undivided road, in both directions, to stop at least 25 feet from a school bus with flashing red lights and remain stopped until the lights are turned off and the bus moves again.
- If your vehicle begins to skid on a wet New Jersey roadway, what is the recommended action?
- Ease off the gas and steer in the direction you want the front of the car to go
- Brake hard immediately
- Steer sharply opposite the skid
- Accelerate to regain control
Correct answer: Ease off the gas and steer in the direction you want the front of the car to go
New Jersey defensive-driving guidance says to take your foot off the gas, avoid slamming the brakes, and steer in the direction you want the front of the vehicle to go until you regain traction.
- What should a New Jersey driver do when sharing the road with a bicyclist?
- Treat the cyclist as a vehicle with the same rights and allow safe passing distance
- Honk to make the cyclist move onto the sidewalk
- Pass closely and quickly
- Expect cyclists to ride against traffic
Correct answer: Treat the cyclist as a vehicle with the same rights and allow safe passing distance
In New Jersey, bicyclists have the same rights and responsibilities as drivers and ride with the flow of traffic. Drivers must share the road, pass at a safe distance, and check for cyclists before turning or opening a door.
- When driving in fog on a New Jersey road, what is the recommended use of headlights?
- Use low-beam headlights, because high beams reflect back and reduce visibility
- Use high-beam headlights for maximum light
- Drive with no lights to avoid glare
- Use only the parking lights
Correct answer: Use low-beam headlights, because high beams reflect back and reduce visibility
New Jersey advises using low-beam headlights in fog. High beams reflect off the fog and bounce light back at the driver, reducing visibility. Headlights are also required when wipers are in continuous use.
- You encounter a herd of livestock being driven across or along a rural road by a rancher. What is the correct way to handle this?
- Drive slowly through the herd, gently parting the animals
- Honk and rev your engine to scatter them
- Stop or slow to a crawl, wait for direction from the handler, and proceed only when the way is clear
- Pass quickly on the shoulder around the herd
Correct answer: Stop or slow to a crawl, wait for direction from the handler, and proceed only when the way is clear
Stopping or slowing to a crawl, waiting for direction from the handler, and proceeding only when the way is clear, is correct. Livestock on the road can scatter unpredictably, so you should let the handler manage them and move only when safe. Driving through the herd, honking to scatter them, or rushing past on the shoulder can injure animals, the handler, or your vehicle.
- You are sharing a multi-use path crossing where a marked trail used by pedestrians and bicyclists intersects the road, and several people are waiting to cross. What is the proper action?
- Slow or stop and yield to the trail users before proceeding across the path crossing
- Continue at speed because trail users must yield to cars
- Honk to warn them and keep driving
- Edge forward into the crossing to claim your turn
Correct answer: Slow or stop and yield to the trail users before proceeding across the path crossing
Slowing or stopping and yielding to the trail users before proceeding across the path crossing is correct. A marked multi-use path crossing functions like a crosswalk, so pedestrians and bicyclists waiting there have the right to cross safely. Continuing at speed, honking and driving on, or edging into the crossing fails your duty to yield to these vulnerable road users.
- A traffic signal is displaying a flashing red light at an intersection. What does this signal require a driver to do?
- Come to a complete stop, then proceed when it is safe
- Slow down and proceed with caution without stopping
- Stop only if other vehicles are present
- Continue at the posted speed limit without slowing
Correct answer: Come to a complete stop, then proceed when it is safe
Coming to a complete stop and then proceeding when safe is correct. A flashing red light has the same meaning as a stop sign: the driver must make a full stop, yield to any traffic or pedestrians, and continue only when the way is clear. It is not a yield-only or speed-maintaining signal.
- While driving at night you approach an intersection where the traffic signal is showing a flashing yellow light. What is the correct action?
- Stop completely and wait for the light to change
- Slow down and proceed with caution
- Treat it exactly like a stop sign and make a full stop
- Speed up to clear the intersection quickly
Correct answer: Slow down and proceed with caution
Slowing down and proceeding with caution is correct. A flashing yellow light warns drivers that the intersection requires extra care; they may continue through without stopping but must watch for cross traffic and pedestrians. A full stop is required only for a flashing red light, not a flashing yellow.
- A standard stop sign has a distinctive shape that helps drivers recognize it even when its lettering is obscured by snow or dirt. What shape is a stop sign?
- Triangle
- Diamond
- Octagon
- Pentagon
Correct answer: Octagon
An octagon (eight-sided shape) is correct. The stop sign's unique octagonal shape and red color are reserved for stopping, so drivers can identify it by outline alone. A triangle signals yield, a diamond warns of hazards, and a pentagon marks school zones.
- Highway warning signs share a common background color so drivers can quickly recognize them as cautionary. What color are most warning signs?
Correct answer: Yellow
Yellow is correct. The standard background color for warning signs is yellow, which signals caution and alerts drivers to potential hazards ahead. Red is used for prohibitions and stopping, green for guidance and directions, and blue for motorist services.
- You see a yellow diamond-shaped sign ahead on the roadway. What category of message does this sign convey?
- A warning about conditions or hazards ahead
- A regulatory law that must be obeyed
- Information about nearby services and exits
- A destination or distance to a city
Correct answer: A warning about conditions or hazards ahead
A warning about conditions or hazards ahead is correct. Yellow diamond-shaped signs alert drivers to upcoming road conditions such as curves, intersections, or changes in the roadway so they can prepare. Regulatory laws appear on white or red signs, and service and destination information uses blue or green signs.
- A two-lane road has a solid yellow line on your side of the center marking. What does this pavement marking tell you about passing?
- Passing is allowed when traffic is clear
- Passing is prohibited from your lane
- The road is one-way in your direction
- You must come to a stop before crossing
Correct answer: Passing is prohibited from your lane
Passing being prohibited from your lane is correct. A solid yellow line on your side of the centerline separates opposing traffic and means you may not cross it to pass. A broken yellow line would permit passing when it is safe; yellow lines always divide traffic moving in opposite directions.
- An approaching traffic signal changes from green to a steady yellow light as you near the intersection. What is the primary meaning of the steady yellow light?
- The light is broken and should be ignored
- Pedestrians have the exclusive walk phase
- The signal is about to turn red; prepare to stop
- It is safe to accelerate through the intersection
Correct answer: The signal is about to turn red; prepare to stop
The signal being about to turn red, meaning prepare to stop, is correct. A steady yellow light warns drivers that the green phase is ending and red is next, so they should stop safely if they can. It is not a signal to speed up or a pedestrian-only phase.
- Regulatory signs make up one of the main categories of traffic signs. What is the defining purpose of a regulatory sign?
- It points the way to cities and attractions
- It identifies rest areas and gas stations
- It informs drivers of upcoming hazards
- It tells drivers what they must or must not do
Correct answer: It tells drivers what they must or must not do
Telling drivers what they must or must not do is correct. Regulatory signs convey traffic laws and rules, such as speed limits, stopping, and turning restrictions, and disobeying them is a violation. Warning signs flag hazards, while guide and service signs provide directions or facility information.
- Approaching a railroad crossing, you see a flashing red light and lowered crossing gate. What must a driver do?
- Stop and wait until the gates rise and lights stop flashing
- Drive around the gate if no train is visible
- Slow down and cross while watching for the train
- Stop only if you hear the train's horn
Correct answer: Stop and wait until the gates rise and lights stop flashing
Stopping and waiting until the gates rise and the lights stop flashing is correct. Activated flashing red lights and a lowered gate mean a train is approaching, and a driver must stop and remain stopped until the warning ends. Going around a gate or crossing while signals are active is dangerous and illegal.
- On a rural highway you see a yellow sign shaped like a pennant (a horizontal triangle pointing right) on the left side of the road. What does this sign warn?
- A school zone is ahead
- The start of a no-passing zone
- A railroad crossing is ahead
- A divided highway begins
Correct answer: The start of a no-passing zone
The start of a no-passing zone is correct. The pennant-shaped warning sign is unique to marking where a no-passing zone begins and is posted on the left side of the road. Its shape distinguishes it from school, railroad, and other warning signs.
- A five-sided sign with a point at the top is used for a specific roadside situation. What does this pentagon-shaped sign indicate?
- A hospital is nearby
- A sharp curve is ahead
- A school zone or school crossing
- A dead-end street
Correct answer: A school zone or school crossing
A school zone or school crossing is correct. The pentagon shape with a point at the top is reserved for school advance-warning and school-crossing signs, alerting drivers to slow down and watch for children. Curves use diamond signs, and hospital and dead-end information appears on different sign types.
- You are driving on a multilane road and notice broken (dashed) white lines separating the lanes. What do these markings indicate?
- Traffic flows in opposite directions on each side
- You may never cross between these lanes
- The lane ends and merges immediately ahead
- Lane changes are permitted when it is safe
Correct answer: Lane changes are permitted when it is safe
Lane changes being permitted when safe is correct. Broken white lines separate lanes of traffic moving in the same direction and allow drivers to move between lanes when it is safe to do so. A solid white line discourages or prohibits lane changes, and white lines never divide opposing traffic.
- You are stopped at a red traffic light when the signal changes to a steady green arrow pointing in the direction you intend to travel. What does the green arrow permit?
- You may proceed in the arrow's direction with a protected path clear of conflicting traffic
- You must stop and wait for a round green light
- You may turn only after yielding to oncoming vehicles
- You must merge into the lane to your right
Correct answer: You may proceed in the arrow's direction with a protected path clear of conflicting traffic
Proceeding in the arrow's direction with a protected path clear of conflicting traffic is correct. A green arrow gives a protected movement in the direction it points, meaning conflicting traffic and pedestrians are held by their own red signals. Unlike a turn on a round green light, the green arrow does not require yielding to oncoming traffic.
- A traffic signal for your lane displays a steady red arrow pointing left. What does the red arrow mean for a driver wishing to turn left?
- Turn left only after yielding to oncoming traffic
- Stop and do not turn in the arrow's direction
- Proceed with the left turn immediately
- Merge right because the left lane is closed
Correct answer: Stop and do not turn in the arrow's direction
Stopping and not turning in the arrow's direction is correct. A steady red arrow means drivers must stop and may not make the movement shown by the arrow until it changes to green or another permitted signal. It does not authorize a yielded or immediate turn.
- While driving you encounter a faded sign whose lettering is unreadable, but it is yellow and diamond-shaped and placed before a sharp bend. Based on its color and shape alone, what should you conclude?
- It is a regulatory sign setting a legal requirement
- It is a guide sign giving distance to a town
- It is a warning sign cautioning about the road ahead
- It is a service sign marking a rest stop
Correct answer: It is a warning sign cautioning about the road ahead
It being a warning sign cautioning about the road ahead is correct. Color and shape are reliable identifiers: yellow plus a diamond outline always signals a warning, here about the curve, even if the words are unreadable. Regulatory, guide, and service messages use different colors and shapes.
- You see a black-and-white rectangular sign reading 'SPEED LIMIT 45' and, just past it, a yellow diamond sign showing a curving arrow with '35' beneath it. How do these two signs differ in legal force?
- Both signs set legally enforceable speed limits
- The yellow sign sets the legal limit and overrides the white sign
- Neither sign has any legal meaning
- The black-and-white sign sets the legal limit, while the yellow sign advises a safe speed for the curve
Correct answer: The black-and-white sign sets the legal limit, while the yellow sign advises a safe speed for the curve
The black-and-white sign setting the legal limit while the yellow sign advises a safe speed is correct. Rectangular black-and-white signs are regulatory and enforceable, whereas yellow diamond signs are warnings and the speed shown is a recommended safe speed for the condition. The yellow advisory does not override or replace the posted legal limit.
- You and another driver reach a four-way stop, but you clearly stop a full second before the other vehicle does. The other vehicle is to your right. Who has the right of way?
- You, because you came to a complete stop first
- The other driver, because the vehicle on the right always goes first
- Whichever driver is going straight rather than turning
- The other driver, because that vehicle stopped more recently
Correct answer: You, because you came to a complete stop first
You have the right of way because you came to a complete stop first. At a four-way stop, the first vehicle to stop proceeds first, and the yield-to-the-right rule only settles ties when vehicles stop at the same moment. Being on the right does not override clearly arriving and stopping earlier.
- At a four-way stop, why is it useful to make eye contact and watch what other drivers actually do rather than relying only on who technically has the right of way?
- Because the driver who waves is legally in charge of the intersection
- Because eye contact transfers the right of way to you
- Because other drivers may not follow the rules, and confirming their intentions prevents a collision
- Because the law requires drivers to signal each other before moving
Correct answer: Because other drivers may not follow the rules, and confirming their intentions prevents a collision
Watching other drivers matters because they may not follow the rules, and confirming their intentions helps prevent a collision. Right of way is something you give, not something you forcefully take, so a cautious driver verifies that others are actually yielding before proceeding. Hand signals and eye contact do not legally transfer the right of way.
- You are stopped at a four-way stop and a vehicle directly across from you arrived at the same time. Both of you intend to go straight ahead and your paths do not cross. What is the correct action?
- Wait until the opposing vehicle has completely cleared before moving
- Both of you may proceed straight ahead at the same time because your paths do not conflict
- The vehicle on the busier road must go first
- Honk to decide which driver moves first
Correct answer: Both of you may proceed straight ahead at the same time because your paths do not conflict
Both of you may proceed straight ahead at the same time because your paths do not conflict. When two opposing vehicles both go straight, their routes do not cross, so neither must yield to the other. Forcing one to wait is unnecessary, and road size or horns do not govern this situation.
- You approach an open intersection in a quiet neighborhood with no signs or signals, and a vehicle is approaching from your left at the same time. Who must yield?
- The vehicle on your left must yield to you
- You must yield to the vehicle on your left
- Neither driver, because there are no signs
- Whichever driver is moving slower must yield
Correct answer: The vehicle on your left must yield to you
The vehicle on your left must yield to you. At an uncontrolled intersection where two vehicles arrive together, the driver on the left gives the right of way to the driver on the right, and here you are the right-hand vehicle. The absence of signs does not eliminate right-of-way duties, and travel speed does not determine priority.
- What is the safest speed strategy when approaching an uncontrolled intersection with limited visibility caused by hedges and parked cars?
- Maintain your speed since you have no stop sign
- Slow down enough to stop if a vehicle or pedestrian suddenly appears
- Speed up to spend less time crossing the danger area
- Stop completely every time even when the way is fully clear
Correct answer: Slow down enough to stop if a vehicle or pedestrian suddenly appears
You should slow down enough to stop if a vehicle or pedestrian suddenly appears. At an uncontrolled intersection with blocked sightlines, a driver must reduce speed and be prepared to yield because hazards can emerge without warning. Keeping speed or accelerating reduces reaction time, and a full stop is required only when needed for safety.
- You arrive at an uncontrolled intersection and a pedestrian is already crossing the road you intend to enter, while another car waits on the cross street. In what order should you handle the right of way?
- Drive through first because vehicles outrank both the pedestrian and the waiting car
- Make the waiting car go before the pedestrian
- Let the pedestrian finish crossing first, then sort out vehicle right of way
- Proceed at the same time as the pedestrian to keep traffic moving
Correct answer: Let the pedestrian finish crossing first, then sort out vehicle right of way
You should let the pedestrian finish crossing first, then sort out vehicle right of way. Pedestrians already in the roadway receive the right of way over all vehicles, so they are protected before any car-to-car priority is resolved. Driving through or moving alongside a crossing pedestrian is unsafe and unlawful.
- You are turning left at a green light into a side street, and a pedestrian is crossing that side street within the crosswalk you must pass through. What must you do?
- Complete the turn quickly in front of the pedestrian
- Turn while sounding your horn to alert the pedestrian
- Proceed because a left-turning vehicle has priority over pedestrians
- Yield to the pedestrian and complete the turn only after they have safely crossed your path
Correct answer: Yield to the pedestrian and complete the turn only after they have safely crossed your path
You must yield to the pedestrian and complete the turn only after they have safely crossed your path. A driver turning left on a green light must yield to oncoming traffic and to pedestrians legally in the crosswalk being entered. A left turn does not grant priority over people on foot, and rushing or honking at them is improper.
- You intend to turn left at an intersection with a steady green arrow pointing left. How does this signal change your duty compared with a round green light?
- You still must yield to all oncoming traffic before turning
- The green arrow gives you a protected turn, meaning oncoming traffic is being held by a red signal
- You must come to a complete stop before turning on the arrow
- The arrow means left turns are prohibited at this time
Correct answer: The green arrow gives you a protected turn, meaning oncoming traffic is being held by a red signal
A steady green arrow gives you a protected turn, meaning oncoming traffic is being held by a red signal. Unlike a round green light, where a left-turning driver must yield to oncoming vehicles, the green arrow clears your path so you may turn without that conflicting traffic. You still watch for pedestrians, but you are not yielding to opposing cars.
- Two oncoming vehicles each want to turn left at the same intersection and arrive at the same time. What is the generally recommended way for them to complete their turns?
- Each turns to the left of the other, passing driver-side to driver-side
- The first to honk turns first while the other waits
- Both wait indefinitely until one gives up the turn
- Each turns in front of the other, crossing paths directly
Correct answer: Each turns to the left of the other, passing driver-side to driver-side
Each driver turns to the left of the other, passing driver-side to driver-side. When two opposing vehicles turn left at the same time, passing left side to left side keeps their paths from crossing and clears their view of the road they are entering. Turning directly in front of each other creates a blind, conflicting path, and horns do not establish order.
- You are approaching a yield sign where your road merges into another, and there is a large, easily clearable gap in the traffic ahead. What does the yield sign allow you to do?
- Stop completely first, as the sign always requires
- Merge smoothly without stopping, since a safe gap exists
- Speed up well above the limit to take the gap
- Wait for all traffic to clear entirely before merging
Correct answer: Merge smoothly without stopping, since a safe gap exists
The yield sign allows you to merge smoothly without stopping, since a safe gap exists. A yield sign requires stopping only when necessary to give the right of way, so when traffic is clear you may continue at a safe speed. A full stop is not always required, you should not exceed the limit, and you need not wait for every vehicle to pass.
- What is the basic meaning of a triangular yield sign for the driver who faces it?
- Stop and remain stopped until a signal changes
- Increase speed to merge ahead of cross traffic
- Give the right of way to traffic and pedestrians in or approaching the intersection or roadway you are entering
- You have the right of way over all other road users
Correct answer: Give the right of way to traffic and pedestrians in or approaching the intersection or roadway you are entering
A yield sign means give the right of way to traffic and pedestrians in or approaching the intersection or roadway you are entering. The driver must let conflicting traffic and pedestrians go first, slowing or stopping as needed. It does not grant you priority, and it is not an instruction to speed up to beat other traffic.
- You are circulating inside a multi-lane roundabout when an emergency vehicle with lights and siren approaches behind you. The correct action differs from an open road. What should you do?
- Stop immediately in the roundabout to let it pass
- Make a U-turn inside the circle to clear the way
- Speed around the circle to get away from the emergency vehicle
- Continue to your exit, then pull over and stop beyond the roundabout
Correct answer: Continue to your exit, then pull over and stop beyond the roundabout
You should continue to your exit, then pull over and stop beyond the roundabout. Stopping inside a roundabout blocks circulating traffic and the emergency vehicle, so the safe practice is to exit first and then yield at the curb. U-turns inside the circle and racing around it are dangerous and prohibited.
- As you enter a single-lane roundabout, you notice circulating traffic but also a pedestrian crossing at the marked crosswalk on the approach just before the yield line. Whom must you yield to first?
- Only the circulating traffic, since pedestrians wait outside roundabouts
- The pedestrian at the crosswalk, and then the circulating traffic
- Neither, because roundabouts have no pedestrian crossings
- The vehicle behind you before anyone else
Correct answer: The pedestrian at the crosswalk, and then the circulating traffic
You must yield to the pedestrian at the crosswalk, and then to the circulating traffic. Roundabout approaches commonly have crosswalks before the yield line, so drivers give way to crossing pedestrians and then to vehicles already in the circle. Pedestrians are not excluded from roundabouts, and the vehicle behind you does not have priority.
- Why are entering drivers required to yield to traffic already inside a roundabout rather than the other way around?
- Because vehicles in the circle are usually larger
- Because entering drivers can see better than circulating drivers
- Because keeping circulating traffic moving prevents the roundabout from backing up and reduces conflicts
- Because circulating vehicles are required to travel faster
Correct answer: Because keeping circulating traffic moving prevents the roundabout from backing up and reduces conflicts
Entering drivers yield because keeping circulating traffic moving prevents the roundabout from backing up and reduces conflicts. If vehicles already in the circle had to stop for every entering car, the roundabout would jam and lose its safety benefit. Vehicle size, sightlines, and speed are not the reasons for this rule.
- A pedestrian who has started to cross at a crosswalk is moving slowly because they use a walker. The signal in your direction turns green while they are still in your lane. What must you do?
- Edge forward to encourage them to hurry
- Drive around behind them while they cross
- Proceed because the green light cancels their right of way
- Wait and yield until the pedestrian has safely completed the crossing
Correct answer: Wait and yield until the pedestrian has safely completed the crossing
You must wait and yield until the pedestrian has safely completed the crossing. Drivers are required to give pedestrians enough time to cross, and a green light does not override the right of way of someone already lawfully in the crosswalk. Edging forward, driving around them, or proceeding into their path is unsafe and unlawful.
- On a multi-lane road, the vehicle in the lane next to you has stopped at a marked crosswalk where there is no signal. You cannot see why it stopped. What is the safest action?
- Pass the stopped vehicle since your lane is clear
- Slow down and be prepared to stop, because the vehicle may be yielding to a pedestrian you cannot see
- Speed up to clear the crosswalk before the other vehicle moves
- Sound your horn at the stopped vehicle to make it move
Correct answer: Slow down and be prepared to stop, because the vehicle may be yielding to a pedestrian you cannot see
You should slow down and be prepared to stop, because the vehicle may be yielding to a pedestrian you cannot see. A car stopped at a crosswalk is a strong clue that someone is crossing, and passing it could strike a hidden pedestrian. Speeding past or honking ignores the danger and the pedestrian's right of way.
- A carpool (HOV) lane on a freeway is posted as restricted only during morning and evening rush hours. What does this tell a solo driver?
- The lane is closed to all traffic at all times
- A single driver may use the lane outside the posted restricted hours but not during them
- A single driver may use the lane at any time of day
- Only motorcycles may ever use the lane
Correct answer: A single driver may use the lane outside the posted restricted hours but not during them
It tells a solo driver they may use the lane outside the posted restricted hours but not during them. Part-time HOV lanes enforce the occupancy requirement only during the posted periods, so the lane is open to all traffic at other times. It is not closed to everyone, not always open to single drivers, and not limited to motorcycles.
- You want to leave a carpool (HOV) lane that is separated from the regular lanes by a solid double white line. How are you permitted to exit?
- Cross the solid double white line wherever it is convenient
- Stop in the HOV lane and wait for a gap to back into another lane
- Cross the line only if you signal first
- Exit only where the lane line becomes broken or at a designated opening
Correct answer: Exit only where the lane line becomes broken or at a designated opening
You may exit only where the lane line becomes broken or at a designated opening. A solid double white line marks where crossing into or out of the HOV lane is prohibited, so you must wait for a broken-line section to change lanes. Crossing a solid line, stopping in the lane, or merely signaling does not make an illegal crossing permissible.
- A posted school-zone speed limit applies 'when children are present.' During a school holiday with no children anywhere near the school, how does this affect your obligation?
- The reduced limit still applies at all hours regardless of children
- The reduced limit may not apply when no children are present, but you should slow if there is any doubt
- You may always exceed the regular road limit in a school zone
- School-zone limits never depend on whether children are present
Correct answer: The reduced limit may not apply when no children are present, but you should slow if there is any doubt
The reduced limit may not apply when no children are present, but you should slow if there is any doubt. A 'when children are present' restriction ties the lower limit to the actual presence of children, yet a cautious driver slows whenever it is uncertain. You may never exceed the normal road limit, and many zones do depend on children being present.
- You are driving the posted 30 mph speed on a street that enters a school zone where flashing yellow beacons have just begun operating. What must you do?
- Continue at 30 mph because you were already at the road limit
- Stop completely at the first beacon
- Slow to the lower school-zone limit indicated by the flashing beacons
- Speed up to pass through the zone faster
Correct answer: Slow to the lower school-zone limit indicated by the flashing beacons
You must slow to the lower school-zone limit indicated by the flashing beacons. Flashing beacons activate the reduced school-zone speed, so the normal road limit no longer applies while they operate. You are not required to stop at the beacons, and speeding through the zone is both unsafe and unlawful.
- A driver under 21 is stopped and a breath test shows a blood alcohol concentration of 0.01 percent. Under zero-tolerance laws, how is this treated?
- It is legal because it is well under the 0.08 adult limit
- It is legal because only a 0.05 reading matters for young drivers
- It is a violation because zero-tolerance laws prohibit nearly any measurable alcohol for under-21 drivers
- It is treated the same as an adult driver at 0.08
Correct answer: It is a violation because zero-tolerance laws prohibit nearly any measurable alcohol for under-21 drivers
It is a violation because zero-tolerance laws prohibit nearly any measurable alcohol for under-21 drivers. These laws set the limit at essentially zero, so a reading such as 0.01 percent can result in penalties even though it is far below the 0.08 adult standard. The under-21 driver is not judged by the adult limit.
- Two seconds after the car ahead of you passes a roadside mailbox, you reach that same mailbox while driving in clear, dry weather. What does this tell you about your following distance?
- It is too short, because at least three seconds should pass before you reach the marker
- It is exactly right, because two seconds is the recommended cushion
- It is too long, and you should move closer
- It is acceptable as long as you are below the speed limit
Correct answer: It is too short, because at least three seconds should pass before you reach the marker
Your following distance is too short, because at least three seconds should pass before you reach the marker. Reaching the mailbox in only two seconds means you are inside the three-second minimum taught for good, dry conditions and would not have enough time to react if the car ahead stopped suddenly. Two seconds is below the standard, the gap is not too long, and staying under the speed limit does not make a short gap safe.
- Why does the three-second following rule use a count of seconds rather than a fixed number of feet or car lengths?
- Because seconds are easier to convert into miles per hour
- Because a time-based gap automatically adjusts the actual distance as your speed changes
- Because car lengths are illegal to use as a measurement
- Because feet cannot be estimated while the vehicle is moving
Correct answer: Because a time-based gap automatically adjusts the actual distance as your speed changes
The rule uses seconds because a time-based gap automatically adjusts the actual distance as your speed changes. A fixed footage that is safe at low speed becomes far too small at highway speed, but counting seconds keeps the cushion proportional to how fast you are traveling. Seconds are not chosen for unit conversion, car lengths are not illegal, and feet can be roughly estimated; the real advantage is automatic scaling with speed.
- Compared with driving on a clear, dry day, how should you adjust your following distance when the road is covered in snow or ice?
- Keep the same gap, because following distance does not depend on the road surface
- Shorten the gap so other drivers cannot cut in front of you
- Lengthen the gap well beyond the normal minimum to allow for much longer stopping distances
- Eliminate the gap and rely entirely on your brakes
Correct answer: Lengthen the gap well beyond the normal minimum to allow for much longer stopping distances
You should lengthen the gap well beyond the normal minimum to allow for much longer stopping distances. Snow and ice greatly reduce tire traction, so a vehicle needs far more room to stop, and the usual three-second cushion is no longer enough. Keeping the same gap ignores the lost traction, shortening it is dangerous, and relying only on brakes on a slick surface invites a skid.
- When you stop behind another vehicle at a red light or in traffic, roughly how much space should you leave so you have room to maneuver if needed?
- Just enough that your bumper nearly touches the vehicle ahead
- At least three full car lengths in all situations
- No space, so following vehicles cannot squeeze in
- Enough to see the rear tires of the vehicle ahead touching the pavement
Correct answer: Enough to see the rear tires of the vehicle ahead touching the pavement
You should leave enough space to see the rear tires of the vehicle ahead touching the pavement. That guideline keeps a usable cushion when stopped, letting you steer around the vehicle if it stalls or if you must avoid being pushed into it from behind. Nearly touching bumpers leaves no room, a rigid three car lengths is impractical when stopped, and leaving no space removes your escape route.
- When are mirror-only checks not enough, so you must also turn your head to look directly at the area beside your vehicle?
- Only when parallel parking on a hill
- Only when driving in heavy fog
- When backing straight out of a driveway in a quiet area
- When merging onto a freeway or moving over for a lane change
Correct answer: When merging onto a freeway or moving over for a lane change
You must turn your head to look beside your vehicle when merging onto a freeway or moving over for a lane change. These sideways movements can put you into a lane where another vehicle sits in the area your mirrors cannot show, so a direct over-the-shoulder look is required. Parallel parking on a hill, heavy fog, and backing straight out of a quiet driveway are not the situations the blind-spot head check is specifically meant to cover before merging.
- Why can a properly adjusted set of mirrors still leave a blind spot beside your car?
- Because mirrors only work when the headlights are on
- Because the glass in side mirrors curves the wrong way
- Because mirrors cannot cover the area to the side and slightly behind where a whole vehicle can hide
- Because mirrors stop reflecting at highway speeds
Correct answer: Because mirrors cannot cover the area to the side and slightly behind where a whole vehicle can hide
Even well-adjusted mirrors leave a blind spot because they cannot cover the area to the side and slightly behind your car where a whole vehicle can hide. The angles the rearview and side mirrors capture simply do not include those zones, which is why an over-the-shoulder glance is needed. Mirrors work in daylight without headlights, the glass curve actually widens the view, and mirrors keep reflecting at any speed.
- Driving on a slick road, you feel the rear of your car start to slide sideways. Besides steering where you want to go, what should you do with the brake and accelerator?
- Avoid hard braking and ease your foot off the accelerator
- Press the brake firmly and floor the accelerator at the same time
- Pump the brake rapidly while accelerating
- Hold the accelerator steady and ignore the slide
Correct answer: Avoid hard braking and ease your foot off the accelerator
You should avoid hard braking and ease your foot off the accelerator. Lifting off the gas lets the drive wheels regain traction, and staying off the brakes prevents the wheels from locking, both of which help you steer out of the slide. Flooring the gas, braking hard, or holding the accelerator steady all keep the tires from regaining the grip needed to recover.
- A driver going too fast on a wet curve suddenly jerks the steering wheel and stabs the brakes, sending the car into a skid. Which combination of mistakes most directly caused the skid?
- Driving with the headlights on and the radio playing
- Excessive speed combined with abrupt steering and braking inputs
- Keeping both hands on the wheel and looking far ahead
- Using the turn signal before entering the curve
Correct answer: Excessive speed combined with abrupt steering and braking inputs
Excessive speed combined with abrupt steering and braking inputs most directly caused the skid. Sudden, forceful actions overwhelm the limited grip available on a wet curve, breaking the tires loose, and too much speed leaves no traction in reserve. Headlights and radio, proper hand position with eyes ahead, and signaling do not cause a skid; the abrupt inputs at high speed do.
- At higher speeds on a wet road, why does hydroplaning become more likely than at lower speeds?
- Because the tires spin too slowly to throw off water
- Because higher speed cools the tires and reduces grip
- Because the faster a tire moves, the less time it has to push water out of the way, so it rides up onto the water
- Because the engine pulls water up under the car
Correct answer: Because the faster a tire moves, the less time it has to push water out of the way, so it rides up onto the water
Hydroplaning becomes more likely at higher speeds because the faster a tire moves, the less time it has to push water out of the way, so it rides up onto the water. Below a certain speed the tread can channel water aside, but as speed climbs the water cannot escape fast enough and lifts the tire off the pavement. The tires are spinning faster, not slower, and engine action and tire temperature are not what cause hydroplaning.
- Which vehicle is most at risk of hydroplaning when driving fast through standing water on the road?
- A vehicle with worn, balding tires that have little tread
- A vehicle with brand-new tires and deep tread
- A vehicle traveling well below the speed limit
- A heavy vehicle moving slowly through a puddle
Correct answer: A vehicle with worn, balding tires that have little tread
A vehicle with worn, balding tires that have little tread is most at risk of hydroplaning. Tread grooves channel water away from the contact patch, so tires with little tread cannot move the water and ride up onto it much more easily. Deep new tread resists hydroplaning, and driving slowly gives any tire time to disperse water, lowering the risk rather than raising it.
- You are following a school bus that begins to slow and activates flashing amber (yellow) lights before it comes to a stop. What does this signal tell you to do?
- Pass the bus immediately while it is still moving slowly
- Maintain your speed because amber lights apply only to oncoming traffic
- Sound your horn to encourage the bus to keep moving
- Prepare to stop because the bus is about to halt and switch on its red lights
Correct answer: Prepare to stop because the bus is about to halt and switch on its red lights
Preparing to stop because the bus is about to halt and switch on its red lights is correct. Flashing amber lights are a warning that the bus is preparing to stop to load or unload children, so following drivers should slow and get ready to come to a full stop when the red lights begin flashing. Passing, holding your speed, or honking ignores the warning and risks not being able to stop in time.
- On a two-lane road you have stopped for a school bus displaying flashing red lights and an extended stop arm, and a child who got off the bus is now crossing in front of it. The red lights stop flashing and the stop arm folds back in, but the child is still in the roadway. What should you do?
- Begin driving as soon as the red lights turn off, regardless of the child
- Accelerate past on the left because the bus has finished loading
- Remain stopped until the child has finished crossing and is safely off the road
- Edge forward slowly to encourage the child to hurry across
Correct answer: Remain stopped until the child has finished crossing and is safely off the road
Remaining stopped until the child has finished crossing and is safely off the road is correct. Even after a bus turns off its signals, you must continue to yield to pedestrians, and children near a bus are unpredictable, so you wait until the roadway is clear. Driving forward, passing, or creeping toward the child endangers the pedestrian regardless of the bus signal status.
- A motorcyclist riding ahead of you is positioned toward the left side of the lane rather than the center. How should you interpret the amount of following space the motorcycle needs?
- A motorcycle stops faster than a car, so you can follow more closely than usual
- Allow a greater following distance, because a motorcycle can stop quickly or be upset by road hazards a car would ignore
- Tailgate closely so the rider knows you intend to pass
- Treat the lane as shared and drive alongside the motorcycle in the same lane
Correct answer: Allow a greater following distance, because a motorcycle can stop quickly or be upset by road hazards a car would ignore
Allowing a greater following distance is correct, because a motorcycle can stop in a short distance or be thrown off balance by potholes, gravel, or debris that would not affect a car, and it may also slow without brake lights by downshifting. Following too closely, tailgating, or sharing the lane leaves no room to react if the rider brakes or swerves suddenly.
- You are stopped at a red light and a motorcycle is stopped in the lane directly ahead of you. When the light turns green, what is the best practice for sharing that lane space?
- Pull up beside the motorcycle so two vehicles occupy the single lane
- Move forward in the same lane next to the rider to save space
- Give the motorcyclist the full lane and follow at a safe distance rather than crowding the rider
- Edge close behind so the rider feels pressured to move quickly
Correct answer: Give the motorcyclist the full lane and follow at a safe distance rather than crowding the rider
Giving the motorcyclist the full lane and following at a safe distance is correct. A motorcycle is entitled to the entire width of a traffic lane, and the rider may need that space to maneuver around hazards or maintain balance, so you should never share the lane or crowd the rider. Pulling alongside or tailgating removes the rider's room to react and is unsafe.
- While driving on a highway you see a sign reading 'Road Work Ahead' followed by a 'Fines Double in Work Zones' sign, even though no workers are currently visible. How does the work-zone speed limit apply?
- It applies only when workers are actually present in the zone
- It applies the entire time you are in the marked work zone, whether or not workers are visible
- It applies only on weekdays during normal business hours
- It is optional until you reach the equipment in the zone
Correct answer: It applies the entire time you are in the marked work zone, whether or not workers are visible
Applying the entire time you are in the marked work zone, whether or not workers are visible, is correct. Posted work-zone speed limits are in effect for the full length of the zone from the first sign, and increased fines apply throughout, because hazards such as uneven pavement, narrowed lanes, and equipment exist even when no crew is in sight. Waiting until you see workers or treating the limit as optional is both unsafe and illegal.
- You are approaching a highway work zone where a flagger is standing in the road holding a STOP/SLOW paddle that is turned to the SLOW side. What are you required to do?
- Ignore the flagger and follow only the posted signs
- Come to a complete stop and wait until the flagger leaves the roadway
- Speed up to clear the area before the paddle is turned to STOP
- Obey the flagger and reduce your speed, treating the flagger's directions as you would a traffic signal
Correct answer: Obey the flagger and reduce your speed, treating the flagger's directions as you would a traffic signal
Obeying the flagger and reducing your speed, treating the flagger's directions as you would a traffic signal, is correct. In a work zone a flagger's instructions carry the force of law and override conflicting signs or signals, so a SLOW paddle means proceed at reduced speed with caution. Ignoring the flagger, stopping unnecessarily, or speeding up disregards lawful traffic control and endangers the crew.
- In wet or rainy weather, why do motorcyclists need extra consideration from the drivers around them?
- Motorcycles are unaffected by rain because of their narrow tires
- Slippery surfaces and reduced traction affect a two-wheeled motorcycle more, so drivers should allow more room and avoid sudden moves near them
- Motorcycles must leave the road entirely whenever it rains
- Rain improves a motorcycle's grip, so no extra caution is needed
Correct answer: Slippery surfaces and reduced traction affect a two-wheeled motorcycle more, so drivers should allow more room and avoid sudden moves near them
Slippery surfaces and reduced traction affecting a two-wheeled motorcycle more, so drivers should allow more room and avoid sudden moves near them, is correct. A motorcycle relies on only two contact patches for balance and braking, so rain, painted lines, and metal surfaces make it far easier to skid than a four-wheeled vehicle. Drivers should give riders extra space and avoid abrupt braking or lane changes that could force a rider into a slick surface.
- Interstate highway route shields are shaped like a shield with a particular color scheme. What colors appear on a standard Interstate route marker?
- Black and yellow
- Red, white, and blue
- Green and white
- Orange and black
Correct answer: Red, white, and blue
Red, white, and blue is correct. The Interstate route shield uses a blue background with a red top band and white route numerals, distinguishing it from other route markers.
- A U.S. route number is shown inside a sign shaped like a rounded shield in black and white. How does a U.S. route marker differ in color from an Interstate marker?
- The U.S. route marker is black and white while the Interstate marker is red, white, and blue
- Both markers use the same red, white, and blue colors
- The U.S. route marker is green while the Interstate marker is brown
- The U.S. route marker is orange while the Interstate marker is yellow
Correct answer: The U.S. route marker is black and white while the Interstate marker is red, white, and blue
The U.S. route marker is black and white while the Interstate marker is red, white, and blue is correct. U.S. highway shields use black numerals on a white shield, unlike the colored Interstate shield.
- A small marker showing a single rising number, such as 'MILE 142,' is posted at regular intervals along a highway shoulder. What is the purpose of these mile markers?
- They tell you the speed limit for that stretch of road
- They mark the number of lanes ahead
- They indicate how many exits remain on the route
- They show distance along the highway and help locate your position for emergencies
Correct answer: They show distance along the highway and help locate your position for emergencies
They show distance along the highway and help locate your position for emergencies is correct. Mileposts count distance from a fixed point and let drivers report a precise location to emergency services.
- An exit on a freeway is labeled 'EXIT 142' on a green guide sign, and the next exit is 'EXIT 145.' What does this numbering system most commonly tell a driver?
- Exit 145 is exactly three exits past Exit 142
- The numbers are random and carry no distance meaning
- The next exit is three blocks away
- The exit number corresponds to the nearest milepost, so the next exit is about three miles away
Correct answer: The exit number corresponds to the nearest milepost, so the next exit is about three miles away
The exit number corresponds to the nearest milepost, so the next exit is about three miles away is correct. Most freeways use mileage-based exit numbering, so the gap between exit numbers approximates the distance in miles.
- A green guide sign over a freeway lane has a small yellow 'EXIT ONLY' panel attached at its bottom. What does that yellow tab tell a driver?
- The lane is the fastest way to continue straight on the freeway
- Only trucks may use the lane
- The lane beneath the sign leaves the freeway and does not continue as a through lane
- The lane is closed for construction
Correct answer: The lane beneath the sign leaves the freeway and does not continue as a through lane
The lane beneath the sign leaves the freeway and does not continue as a through lane is correct. A yellow EXIT ONLY panel warns that the lane will be forced off at the exit, so a driver wishing to continue must move over.
- A large white arrow is painted on the pavement of your lane pointing straight ahead. What does this pavement arrow tell a driver?
- The lane is intended for travel in the direction the arrow points
- Passing is permitted in this lane
- The lane ends at the next intersection
- Parking is allowed along this lane
Correct answer: The lane is intended for travel in the direction the arrow points
The lane is intended for travel in the direction the arrow points is correct. Lane-use arrows painted on the pavement show the movement allowed or required from that lane.
- A lane has a painted arrow that curves to the left and also a straight arrow in the same lane. What does this combination pavement marking allow?
- Drivers must turn left only
- Drivers must stop before proceeding
- Drivers in that lane may either turn left or go straight
- Drivers may only make a U-turn
Correct answer: Drivers in that lane may either turn left or go straight
Drivers in that lane may either turn left or go straight is correct. A combined left-and-straight arrow marks a shared lane permitting both movements.
- The letters 'RXR' along with a large white 'X' are painted across the pavement in your lane. What does this pavement marking warn you about?
- A railroad crossing is ahead
- A school zone is ahead
- A roundabout is ahead
- An express lane begins here
Correct answer: A railroad crossing is ahead
A railroad crossing is ahead is correct. The pavement letters RXR with a large X are placed in advance of a railroad crossing to warn approaching drivers.
- A series of solid white triangles, pointing toward you, is painted across your lane before an intersection. What do these 'shark teeth' markings mean?
- You must come to a complete stop and remain stopped
- You may speed up to clear the intersection
- Parking is permitted past the triangles
- You must yield and be prepared to stop for cross traffic or pedestrians
Correct answer: You must yield and be prepared to stop for cross traffic or pedestrians
You must yield and be prepared to stop for cross traffic or pedestrians is correct. The row of white triangles marks a yield line, often at roundabouts and crosswalks.
- Yellow diagonal stripes fill a painted area between opposing lanes of traffic on the pavement. What does this striped median area indicate?
- It is a passing lane available to either direction
- It is a designated parking strip
- It is a turn lane shared by both directions
- It is a painted buffer that vehicles should not drive on or cross
Correct answer: It is a painted buffer that vehicles should not drive on or cross
It is a painted buffer that vehicles should not drive on or cross is correct. A cross-hatched (diagonally striped) area marks a painted median or gore that separates traffic and should not be entered.
- Where two roads merge, a triangular area of pavement bounded by solid white lines and filled with diagonal stripes appears between the lanes. What is this area called and how should it be treated?
- It is a merge lane drivers must use to enter
- It is a gore area that drivers should not drive across or stop in
- It is an emergency parking zone
- It is a bicycle lane
Correct answer: It is a gore area that drivers should not drive across or stop in
It is a gore area that drivers should not drive across or stop in is correct. The striped triangular gore separates a ramp from through lanes and is not for driving or stopping.
- Raised pavement markers or grooved rumble strips are placed along the centerline or shoulder edge of a highway. What is their main purpose?
- To mark where passing is always allowed
- To indicate a parking area
- To create noise and vibration that alert a driver who is drifting out of the lane
- To show the location of the next exit
Correct answer: To create noise and vibration that alert a driver who is drifting out of the lane
To create noise and vibration that alert a driver who is drifting out of the lane is correct. Rumble strips warn drowsy or distracted drivers that they are leaving their lane.
- Brown background signs with white lettering are posted along a highway. What kind of information do brown signs provide?
- Mandatory speed limits
- Construction zone warnings
- Recreational and cultural points of interest such as parks and historic sites
- Hospital and emergency services
Correct answer: Recreational and cultural points of interest such as parks and historic sites
Recreational and cultural points of interest such as parks and historic sites is correct. Brown is the standard color for signs directing travelers to parks, campgrounds, and cultural attractions.
- A blue background sign with white lettering and symbols is posted near an interchange. What type of information do blue signs typically give drivers?
- Motorist services such as gas, food, lodging, and rest areas
- Sharp curves and other road hazards
- Speed limits that must be obeyed
- Temporary construction detours
Correct answer: Motorist services such as gas, food, lodging, and rest areas
Motorist services such as gas, food, lodging, and rest areas is correct. Blue guide signs direct drivers to services available near the highway.
- An orange diamond or rectangular sign appears along the road. Based on its color alone, what should a driver expect?
- A school zone is ahead
- A construction or maintenance work zone is present
- A recreation area is nearby
- A guide to highway services
Correct answer: A construction or maintenance work zone is present
A construction or maintenance work zone is present is correct. Orange is reserved for temporary traffic control in work and maintenance zones.
- Fluorescent yellow-green diamond signs are used for certain warnings. What kinds of crossings most often use this bright yellow-green color?
- Railroad crossings only
- Freeway exits and interchanges
- Pedestrian, school, and bicycle crossings
- Rest areas and service plazas
Correct answer: Pedestrian, school, and bicycle crossings
Pedestrian, school, and bicycle crossings is correct. The fluorescent yellow-green background improves visibility for vulnerable-user crossing warnings.
- A rectangular orange sign in a work zone reads 'ROAD WORK AHEAD.' How should a driver respond to such advance work-zone signs?
- Maintain highway speed since the work is far away
- Stop immediately in the travel lane
- Slow down, stay alert, and be ready for workers, equipment, or changed conditions
- Ignore it unless workers are visible
Correct answer: Slow down, stay alert, and be ready for workers, equipment, or changed conditions
Slow down, stay alert, and be ready for workers, equipment, or changed conditions is correct. Advance work-zone signs prepare drivers to reduce speed and watch for hazards ahead.
- Bright orange traffic cones and orange-and-white striped barrels are placed along a lane. What is the function of these channelizing devices?
- To indicate free parking spaces
- To show where passing is allowed
- To guide traffic and mark areas that drivers must not enter
- To mark the edge of a bicycle lane permanently
Correct answer: To guide traffic and mark areas that drivers must not enter
To guide traffic and mark areas that drivers must not enter is correct. Cones and barrels channel traffic safely around or through a work zone.
- An electronic arrow board mounted on a truck or trailer in a work zone flashes a large arrow pointing to the left. What does this arrow panel direct drivers to do?
- Speed up and pass on the right
- Merge to the left because the lane ahead is closed
- Stop in the current lane
- Make a U-turn
Correct answer: Merge to the left because the lane ahead is closed
Merge to the left because the lane ahead is closed is correct. A flashing arrow board directs drivers to move out of a closing lane in the direction the arrow points.
- A worker in a work zone is holding a paddle that shows 'STOP' on one side and 'SLOW' on the other. What must a driver do when the flagger displays the STOP side?
- Come to a complete stop and wait until directed to proceed
- Slow down but continue through
- Treat it as a yield and merge
- Proceed only if no workers are visible
Correct answer: Come to a complete stop and wait until directed to proceed
Come to a complete stop and wait until directed to proceed is correct. A flagger's STOP paddle has the same authority as a stop sign or red light in a work zone.
- A solid white line is painted along the right edge of the travel lane on a highway. What does this edge line indicate?
- It marks where passing is allowed
- It marks the right boundary of the roadway available for normal travel
- It marks a bicycle-only lane
- It marks a no-parking restriction at all times
Correct answer: It marks the right boundary of the roadway available for normal travel
It marks the right boundary of the roadway available for normal travel is correct. The white edge line shows the outer limit of the usable travel lane.
- A yellow line is painted along the left edge of the lanes on a divided highway. What does a yellow left-edge line indicate?
- It marks the center of a two-way road
- It marks a passing zone
- It marks a parking lane
- It marks the left edge of the roadway on a one-way or divided highway
Correct answer: It marks the left edge of the roadway on a one-way or divided highway
It marks the left edge of the roadway on a one-way or divided highway is correct. A yellow left-edge line tells drivers on a divided or one-way road that the left side is the road edge.
- A box outlined on the pavement at an intersection contains crisscrossing diagonal yellow lines. What does this 'do not block' box require of drivers?
- Stop inside the box and wait for a green light
- Do not enter the box unless you can clear it, to avoid blocking the intersection
- Park within the box when permitted
- Use the box as a turn lane
Correct answer: Do not enter the box unless you can clear it, to avoid blocking the intersection
Do not enter the box unless you can clear it, to avoid blocking the intersection is correct. A keep-clear hatched box marks an area that must not be blocked by stopped traffic.
- At an intersection, a green box is painted across the front of a lane just behind the crosswalk, often with a bicycle symbol. What is the purpose of this bike box?
- It is a parking spot reserved for bicycles
- It marks where cars must stop and turn
- It indicates a bus loading zone
- It gives bicyclists a place to wait ahead of stopped cars at a red light
Correct answer: It gives bicyclists a place to wait ahead of stopped cars at a red light
It gives bicyclists a place to wait ahead of stopped cars at a red light is correct. A green bike box positions cyclists in front of motor traffic for visibility and safer starts.
