Part 107 Chapter 2: Airspace Classification, Operating Requirements, and Flight Restrictions Welcome to your Part 107 Chapter 2: Airspace Classification, Operating Requirements, and Flight Restrictions 1. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions In Class B airspace, what is required before operating a small unmanned aircraft? A. Permission from local law enforcement B. ATC authorization C. No authorization required D. Permission from the FAA regional office None 2. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions What is the vertical limit of Class G airspace? A. 500 feet AGL B. 1,200 feet AGL C. 14,500 feet MSL D. 18,000 feet MSL None 3. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions What is a characteristic of Class C airspace? A. ATC authorization is required to enter B. It only surrounds small airports C. It extends to 18,000 feet AGL D. No communications with ATC are required None 4. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions When operating in uncontrolled airspace (Class G), at what altitude must a small UAS remain? A. Below 1,200 feet AGL B. Below 400 feet AGL C. Below 500 feet AGL D. Below 200 feet AGL None 5. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions What is the primary purpose of a temporary flight restriction (TFR)? A. To provide a safe environment for emergency aircraft operations B. To protect aircraft from flying near military zones C. To notify aircraft of nearby weather hazards D. To prevent UAS operations near national parks None 6. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions What type of airspace is Class E typically associated with? A. Controlled airspace for smaller airports B. Controlled airspace starting at 14,500 feet AGL C. Uncontrolled airspace D. Controlled airspace not classified as Class A, B, C, or D None 7. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions When flying in controlled airspace, such as Class D airspace, what must a remote pilot do to remain compliant? A. Fly below 200 feet AGL B. Obtain ATC authorization C. Only fly during daylight hours D. Avoid flying over people None 8. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions What is the key difference between Class D and Class E airspace? A. Class D airspace requires communication with ATC; Class E does not B. Class E airspace is uncontrolled C. Class D airspace is higher in altitude than Class E airspace D. Class D airspace has no altitude limits None 9. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions Which type of airspace is generally depicted on sectional charts with blue segmented lines? A. Class C airspace B. Class D airspace C. Class B airspace D. Class E airspace None 10. Part 107: Airspace Classification, Operating Requirements, and Flight Restrictions What is the operational limit of Class B airspace? A. 4,000 feet AGL B. 10,000 feet MSL C. 18,000 feet MSL D. 14,000 feet MSL None 1 out of 10 Time is Up! Time's up