ASE B3 Domain 4:Glass and Hardware Welcome to your ASE B3 Domain 4:Glass and Hardware 1. None 2. ASE B3: Glass and Hardware When replacing a windshield, what type of urethane bead is recommended to ensure optimal bonding and sealing? A. Continuous triangular bead B. Intermittent round bead C. Thin, flat bead D. Thick, zigzag bead None 3. ASE B3: Glass and Hardware In automotive glass repair, what is the primary purpose of using a pit filler resin? A. To fill in large cracks B. To restore structural integrity to the glass C. To smooth out the final repair surface D. To tint the glass for UV protection None 4. ASE B3: Glass and Hardware What is the most critical factor when adjusting a door window to ensure proper operation and sealing? A. The window's alignment with the exterior mirror B. The window's height when fully closed C. The parallel alignment of the window to the door frame D. The color match of the window tint to the vehicle None 5. ASE B3: Glass and Hardware When repairing a power window system, what should be checked first if the window does not move? A. The window regulator B. The fuse and circuit breaker C. The window motor D. The door glass alignment None 6. ASE B3: Glass and Hardware What is a key consideration when replacing tempered automotive glass? A. Preheating the glass before installation B. Ensuring the glass is coated with a UV-resistant layer C. Matching the color tint with the rest of the vehicle's windows D. Handling the glass carefully to avoid sudden impacts None 7. ASE B3: Glass and Hardware In the repair of a rear defogger, what tool is essential for identifying breaks in the grid lines? A. A multimeter B. A UV light C. A thermal camera D. A glass cutter None 8. ASE B3: Glass and Hardware What is the primary reason for using primer on a pinch weld before installing a new windshield? A. To enhance the cosmetic appearance of the weld B. To prevent the urethane adhesive from sticking C. To protect the metal from corrosion D. To increase the thickness of the weld for a tighter fit None 9. ASE B3: Glass and Hardware When reinstalling a door panel after a window repair, what is crucial to ensure proper function and appearance? A. Lubricating the window tracks B. Reconnecting all electrical connectors C. Tightening all screws to the maximum torque D. Applying a sealant around the perimeter of the panel None 10. ASE B3: Glass and Hardware What safety precaution is critical when working with automotive glass, particularly during removal? A. Wearing heat-resistant gloves B. Using a sharp utility knife to cut the sealant C. Wearing cut-resistant gloves D. Applying a lubricant to the glass edges None 1 out of 10 Time is Up! Time's up
