ASE B2 Domain 3: Paint Mixing, Matching, and Applying Welcome to your ASE B2 Domain 3: Paint Mixing, Matching, and Applying 1. ASE B2: Paint Mixing Matching and Applying When color matching a metallic paint, what factor is critical in ensuring a match? A. Spray gun air pressure B. Paint layer thickness C. Angle of metallic flakes D. Temperature in the spray booth None 2. ASE B2: Paint Mixing Matching and Applying The use of a paint mixing system requires: A. Manual calculation for each tint B. A dedicated mixing room C. Precision electronic scales D. A temperature-controlled environment None 3. ASE B2: Paint Mixing Matching and Applying When adjusting paint viscosity, the use of a(n) _____ is essential for consistency. A. Agitator B. Zahn cup C. Infrared lamp D. Air pressure regulator None 4. ASE B2: Paint Mixing Matching and Applying In the basecoat/clearcoat system, the main function of the basecoat is to: A. Provide the color and effect B. Protect against UV radiation C. Add thickness to the paint film D. Seal the primer None 5. ASE B2: Paint Mixing Matching and Applying When applying a tri-coat color system, the mid-coat layer is typically: A. A tinted clearcoat B. An additional primer C. A reflective undercoat D. A protective topcoat None 6. ASE B2: Paint Mixing Matching and Applying To achieve color accuracy when mixing paint, the technician must: A. Use a paint shaker for at least 5 minutes B. Verify the paint code against the vehicle identification number (VIN) C. Measure components by weight, not volume D. Adjust for ambient lighting conditions None 7. ASE B2: Paint Mixing Matching and Applying What is the primary purpose of using a blending solvent when applying a basecoat? A. To accelerate drying time B. To facilitate color blending C. To increase paint thickness D. To reduce paint cost None 8. ASE B2: Paint Mixing Matching and Applying When matching a pearl color, why is spray-out card testing important? A. To test paint durability B. To check for paint reactions C. To ensure color accuracy under different lighting D. To verify the paint thickness None 9. ASE B2: Paint Mixing Matching and Applying In color matching, the term 'metamerism' refers to: A. The change in color appearance under different light sources B. The blending of metallic flakes in the paint C. The measurement of paint film thickness D. The use of different pigments to achieve the same color None 10. ASE B2: Paint Mixing Matching and Applying What is the main advantage of using a spectrophotometer in paint matching? A. It reduces the need for clearcoat B. It increases the drying speed of paint C. It provides precise color formulation D. It eliminates the need for primer None 1 out of 10 Time is Up! Time's up
